Multiple Reaction Pathways in Rhodium‐Catalyzed Hydrosilylations of Ketones

A detailed density functional theory (DFT) computational study (using the BP86/SV(P) and B3LYP/TZVP//BP86/SV(P) level of theory) of the rhodium‐catalyzed hydrosilylation of ketones has shown three mechanistic pathways to be viable. They all involve the generation of a cationic complex [L_nRh^I]⁺ stabilized by the coordination of two ketone molecules and the subsequent oxidative addition of the silane, which results in the Rh–silyl intermediates [L_nRh^III(H)SiHMe₂]⁺. However, they differ in the following reaction steps: in two of them, insertion of the ketone into the Rh? Si bond occurs, as previously proposed by Ojima et al., or into the Si? H bond, as proposed by Chan et al. for dihydrosilanes. The latter in particular is characterized by a very high activation barrier associated with the insertion of the ketone into the Si? H bond, thereby making a new, third mechanistic pathway that involves the formation of a silylene intermediate more likely. This “silylene mechanism” was found to have the lowest activation barrier for the rate‐determining step, the migration of a rhodium‐bonded hydride to the ketone that is coordinated to the silylene ligand. This explains the previously reported rate enhancement for R₂SiH₂ compared to R₃SiH as well as the inverse kinetic isotope effect (KIE) observed experimentally for the overall catalytic cycle because deuterium prefers to be located in the stronger bond, that is, C? D versus M? D.     

Chemoselective functionalization of α-carbolines at the C-2, C-3, C-4, and C-6 positions using Suzuki-Miyaura reactions

The synthesis of 2-, 3-, 4-, and 6-substituted pyrido[2,3-b]indoles (α-carbolines) by palladium-catalyzed cross-coupling reactions from the corresponding halopyrido[2,3-b]indoles is described. A sequential and a one-pot chemoselective double Suzuki-Miyaura coupling route is presented for the synthesis of symmetrically and unsymmetrically disubstituted pyrido[2,3-b]indoles.     

Synthesis,Characterization, Electronic and Gas‐Sensing Properties towards H2 and CO of Transparent,Large‐Area,Low‐Layer Graphene

Low‐layered, transparent graphene is accessible by a chemical vapor deposition (CVD) technique on a Ni‐catalyst layer, which is deposited on a <100> silicon substrate. The number of graphene layers on the substrate is controlled by the grain boundaries in the Ni‐catalyst layer and can be studied by micro Raman analysis. Electrical studies showed a sheet resistance (R_sheet) of approximately 1435 Ω per □, a contact resistance (R_c) of about 127 Ω, and a specific contact resistance (R_sc) of approximately 2.8×10^?4 Ω cm² for the CVD graphene samples. Transistor output characteristics for the graphene sample demonstrated linear current/voltage behavior. A current versus voltage (I_ds–V_ds) plot clearly indicates a p‐conducting characteristic of the synthesized graphene. Gas‐sensor measurements revealed a high sensor activity of the low‐layer graphene material towards H₂ and CO. At 300 °C, a sensor response of approximately 29 towards low H₂ concentrations (1 vol %) was observed, which is by a factor of four higher than recently reported.     

Facile and practical enantioselective synthesis of propargylic alcohols by direct addition of alkynes to aldehydes catalyzed by chiral disulfide–oxazolidine ligands

The enantioselective alkynylation reaction of aldehydes with alkynes and diethylzinc, catalyzed by chiral disulfide–oxazolidine ligands, provides a simple, practical and inexpensive method to access chiral propargylic alcohols in good yields and satisfactory ee's.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Bioconjugation of ultrabright semiconducting polymer dots for specific cellular targeting

Semiconducting polymer dots (Pdots) represent a new class of ultrabright fluorescent probes for biological imaging. They exhibit several important characteristics for experimentally demanding in vitro and in vivo fluorescence studies, such as their high brightness, fast emission rate, excellent photostability, nonblinking, and nontoxic feature. However, controlling the surface chemistry and bioconjugation of Pdots has been a challenging problem that prevented their widespread applications in biological studies. Here, we report a facile yet powerful conjugation method that overcomes this challenge. Our strategy for Pdot functionalization is based on entrapping heterogeneous polymer chains into a single dot, driven by hydrophobic interactions during nanoparticle formation. A small amount of amphiphilic polymer bearing functional groups is co-condensed with the majority of semiconducting polymers to modify and functionalize the nanoparticle surface for subsequent covalent conjugation to biomolecules, such as streptavidin and immunoglobulin G (IgG). The Pdot bioconjugates can effectively and specifically label cellular targets, such as cell surface marker in human breast cancer cells, without any detectable nonspecific binding. Single-particle imaging, cellular imaging, and flow cytometry experiments indicate a much higher fluorescence brightness of Pdots compared to those of Alexa dye and quantum dot probes. The successful bioconjugation of these ultrabright nanoparticles presents a novel opportunity to apply versatile semiconducting polymers to various fluorescence measurements in modern biology and biomedicine.     

RESONANCE-ENHANCED CARS SPECTROSCOPY OF BILIPROTEINS. INFLUENCE OF AGGREGATION and LINKER PROTEINS ON CHROMOPHORE STRUCTURE IN ALLOPHYCOCYANIN (Mastigocladus laminosus)

Abstract— Resonance-enhanced coherent anti-Stokes Raman spectra (CARS) are reported for monomers and for trimers with and without linker proteins of allophycocyanin isolated from Mastigocladus laminosus. The CARS spectrum of the monomer is independent of the presence of linker proteins and is very similar to that of phycocyanin monomers indicating that the equivalent chromophores exhibit like structures in both biliproteins. Large differences are, however, observed between the spectra of phycocyanin trimers and those of allophycocyanin trimers with or without linker proteins (L_c^8,9). The observed differences between monomer and trimer spectra are consistent with a change of the α-chromophore-protein arrangement upon aggregation without linker. If linker proteins are present in the trimer, then additional geometry changes of the β-chromophores are induced; these could relate to a transition from the 15Z- anti to 15Z- syn conformation.     

Synthesis and 13C NMR of (trifluoromethyl)hydroxypyrazoles

Reaction of ethyl 4,4,4-trifluoroacetoacetate with methylhydrazine produced not only the previously reported 5-hydroxy-3-(trifluoromethyl)pyrazole 1 but also its unknown isomer the 3-hydroxy-5-(trifluoromethyl)pyrazole 4 . The structure assignments are established based on ¹³C nmr spectra. Compound 1 was converted to 5-chloro-3-(trifluoromethyl)pyrazolecarboxylic acid 3 in two steps.     

Preparation,Characterisation, and Structure of N-Methylated Derivatives of 1,3,5-Triamino-1,3,5-trideoxy-cis-inositol: Polyalcohols with Unusual Acidity

1,3,5-Trideoxy-1,3,5-tris(dimethylamino)-cis-inositol (TDCI) and 1,3,5-trideoxy-1,3,5-tris(trimethylammonio)-cis-inositol (TTCI) were prepared by methylation of 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (TACI). The ability of TDCI to form both intermolecular and intramolecular H-bonds, as demonstrated by X-ray diffraction, is probably responsible for the good solubility of TDCI in almost every common solvent. TTCI was found to be a polyol of unusual high acidity (pK₁ = 8.14 ± 0.02, pK₂ = 13.0 ± 0.2). This phenomenon could be explained by electrostatic interactions between the charged substituents of the cyclohexane residue.