History of Polymer Education-USA

Prior to 1940 there was little or no education directed toward polymer chemistry. With the contributions of Carothers and others that transformed the practice of polymers into a science-and the leadership of Herman Mark and others in formal graduate and postgraduate education-polymer education took root but rapid expansion and general acceptance by more traditionally oriented academic institutions was slowed by many barriers. Only since 1974 has there been a concerted effort to include education in the basic concepts of polymer chemistry into the undergraduate curriculum. Emphasis is on the development of polymer education in the United States.     

Über Sesquiselenide der Lanthanoide: Einkristalle von Ce2Se3 im C‐, Gd2Se3 im U‐ und Lu2Se3 im Z‐Typ

On Sesquiselenides of the Lanthanoids: Single Crystals of C‐type Ce₂Se₃, U‐type Gd₂Se₃, and Z‐type Lu₂Se₃ Single crystals of lanthanoid sesquiselenides (M₂Se₃; here: M = Ce, Gd, Lu) are accessible through conversion of the elements (lanthanoid and selenium) in molar ratios of 2:3 within seven days at 850 °C from evacuated silica ampoules if equimolar amounts of NaCl serve as a flux. In the case of Ce₂Se₃ (a = 897.74(6) pm) und Gd₂Se₃ (a = 872.56(5) pm) the cubic C‐type (I4¯3d, Z = 5.333) forms as dark red beads, whereas the orthorhombic Z‐type (Fddd, Z = 16) emerges for Lu₂Se₃ (a = 1125.1(1), b = 798.06(8), c = 2387.7(2) pm) as orange‐yellow bricks. Upon oxidation of monochloride hydrides (MClH_x or A_yMClH_x; M = Ce, Gd, Lu; x = 1; A = Li, Na; y = 0.5) with selenium in arc‐welded tantalum ampoules the same main products appear with C‐Ce₂Se₃ and Z‐Lu₂Se₃, even with a surplus of NaCl or LiCl as fluxing agent. In the case of Gd₂Se₃, however, black‐red needles of the orthorhombic U‐type (Pnma, Z = 4; a = 1118.2(1), b = 403.48(4); c = 1097.1(1) pm) are yielded instead of C‐Gd₂Se₃. C‐Ce₂Se₃ crystallizes in a cation‐deficient Th₃P₄‐type structure (Ce₂S₃ type) according to Ce_2.667□_0.333Se₄ (Z = 4) or with Z = 5.333 for the empirical formula Ce₂Se₃. Here, Ce³⁺ is coordinated by eight Se^2— anions trigon‐dodecahedrally. In U‐Gd₂Se₃ (U₂S₃ type) two crystallographically independent Gd³⁺ cations with coordination numbers of 7 (Gd1) and 7+1 (Gd2), respectively, are present, exhibiting mono‐ or bicapped trigonal prisms as coordination polyhedra. The crystal structure of Z‐Lu₂Se₃ (Sc₂S₃ type) shows two different Lu³⁺ cations as well, which now both reside in octahedral coordination of six Se^2— anions each.     

Data Formats for Elementary Gas Phase Kinetics,Part 1: Unique Representations of Species at the Molecular Level

Standardized electronic formats for data are needed to efficiently and transparently communicate the results of scientific studies. A format for the unique identification of chemical species is a requirement in the field of chemistry, and the IUPAC International Chemical Identifier (InChI) has been widely adopted for this purpose. The InChI identifier has proved to be very useful. The InChI identifier, however, is currently insufficient to uniquely specify some types of molecular entities at a detailed molecular level needed to fully characterize their chemical nature, to differentiate between chemically distinct conformers, to uniquely identify structures used in quantum chemical calculations, and to completely describe elementary chemical reactions. To address this limitation, we propose an augmented form of InChI, denoted as InChI–ER, which contains additional optional layers that allow the unique and unambiguous identification of molecules at a detailed molecular level. The new layers proposed herein are optional extensions of the existing InChI formalism and, like all other InChI layers, would not interfere with InChI identifiers currently in use. The focus of the present work is the better specification of required molecular entities such as rotational conformations, ring conformations, and electronic states. In companion articles, we propose additional reaction layers using an extended InChI format that will enable the unique identification of elementary chemical reactions, including specification of associated transition states, specification of the changes in bonds that occur during reaction, and classification of reaction types.     

From simple surface models to lipid membranes: Universal aspects of the hydration interaction from solvent-explicit simulations

A review of atomistic simulation approaches including explicit water for the study of hydration forces between polar surfaces is presented. In particular, we discuss different methods for keeping the chemical potential of water constant and compare advantages and limitations of each method. It turns out that modifications of hydration forces due to surface softness can be accounted for by a convolution over the surface shape profile. Universal aspects of the hydration interaction observed in simulations of different surface chemistries are highlighted, while special attention is given to hydration forces between self-assembled phospholipid membranes.     

First order melting transitions of highly ordered dipalmitoyl phosphatidylcholine gel phase membranes in molecular dynamics simulations with atomistic detail

Molecular dynamics simulations with atomistic detail of the gel phase and melting transitions of dipalmitoyl phosphatidylcholine bilayers in water reveal the dependency of many thermodynamic and structural parameters on the initial system ordering. We quantitatively compare different methods to create a gel phase system and we observe that a very high ordering of the gel phase starting system is necessary to observe behavior which reproduces experimental data. We performed heating scans with speeds down to 0.5 K/ns and could observe sharp first order phase transitions. Also, we investigated the transition enthalpy as the natural intrinsic parameter of first order phase transitions, and obtained a quantitative match with experimental values. Furthermore, we performed systematic investigations of the statistical distribution and heating rate dependency of the microscopic phase transition temperature.     

Untersuchung von Milch

Ohne Zusammenfassung     

THE NATURE OF ULTRAVIOLET LIGHT-INDUCED STRAND BREAKAGE IN DNA CONTAINING BROMOURACIL

Abstract— Single-strand breaks are produced in the phosphodiester backbone of ultraviolet-light-irradiated 5–bromodeoxyuridine-containing DNA (BU-DNA) after treatment with alkali. No radiation dependent breakage is observed in thymine-containing DNA (thy-DNA). The relative yields of breaks terminated by 5'-hydroxyl and 5'-phosphate groups was determined by measuring the rate of phosphorylation achieved with polynucleotide kinase in BU-DNA single strands before and after treatment with alkaline phosphatase. The ratio of 5'-phosphate to 5' hydroxyl groups ranged from 2.3 to 2.9 in different experiments. When cysteamine was present during irradiation no new end groups were produced.
In order to identify the nucleoside(s) at the 5'-termini, phosphate groups were removed with alkaline phosphatase and the 5'-hydroxyl groups were phosphorylated with polynucleotide kinase. Electrophoresis of enzymatic digests showed a single ³²P-labeled component migrating more rapidly than any of the four usual 5'-mononucleotides. Upon column chromatography this component resolved into a major peak coincident with 5'-dUMP and a lesser unidentified constituent. No 5'-dBUM³²P was observed among these nucleotides.     

Polymerizable derivatives of long-chain fatty acids. IV. Vinyl esters

Contrary to some published reports, the vinyl esters of saturated fatty acids polymerize readily and rapidly. Vinyl oleate, when present in excess of 5%, and oxygen exert marked retarding effects. Techniques are described for the free-radical-initiated polymerization of the vinyl esters of caprylic, capric, lauric, myristic, palmitic, and stearic acids in bulk, dispersion, solution, and emulsion. Some data are given for polymerization in the presence of chain-transfer agents, such as carbon tetrachloride, dodecylmercaptan, and ethylbenzene. Conditions are reported for obtaining degrees of polymerization from about 2 (when chain-transfer agents are employed) to 10,000 (weight average). The weight average degree of polymerization increases markedly as the conversion increases, particularly above 80%. Even up to extremely high conversions, soluble polymers are obtained in most cases. Solubility characteristics, transition point data, molecular weights (osmometric and light-scattering), and isolation and purification techniques are also reported.     

Melting Point and Composition Distribution of Polyolefins by Fractionation

The fractionation technique described in this paper was used to characterize the melting-point, monomer, and blocking distributions for polymers and copolymers. It is different from the molecular-weight fractionation technique in that the fractions are obtained by using a single solvent to extract the solid polymer below its melting point at stepwise-increasing temperatures. The reproducibility of this technique is excellent, and the technique is sufficient to distinguish pellet-to-pellet variation in a commercially available polypropylene. It was used to show the influence of preparation variables on the melting-point distributions of polyethylene and polypropylene and on the monomer and blocking distribution of copolymers, and to distinguish copolymers from blends.