Influence of organic modifiers on morphology and crystallization of poly(ϵ‐caprolactone)/synthetic clay intercalated nanocomposites

ε‐caprolactone was polymerized in the presence of neat montmorillonite or organomontmorillonites to obtain a variety of poly(ε‐caprolactone) (PCL)‐based systems loaded with 10 wt % of the silicates. The materials were thoroughly investigated by different X‐ray scattering techniques to determine factors affecting structure of the systems. For one of the nanocomposites it was found that varying the temperature in the range corresponding to crystallization of PCL causes reversible changes in the interlayer distance of the organoclay. Extensive experimental and literature studies on this phenomenon provided clues indicating that this effect might be a result of two‐dimensional ordering of PCL chains inside the galleries of the silicate. Small angle X‐ray scattering and wide angle X‐ray scattering investigation of filaments oriented above melting point of PCL revealed that polymer lamellae were oriented perpendicularly to particles of unmodified silicate, while in PCL/organoclay systems they were found parallel to clay tactoids. Calorimetric and microscopic studies shown that clay particles are effective nucleating agents. In the nanocomposites, PCL crystallized 20‐fold faster than in the neat polymer. The crystallization rate in nanocomposites was also significantly higher than in microcomposite. Further research provided an insight how the presence of the filler affects crystalline fraction and spherulitic structure of the polymer matrix in the investigated systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2350–2367, 2007     

Isotrope Unterräume rationaler quadratischer Formen

Ohne ZusammenfassungDiese Arbeit wurde während eines Aufenthaltes von Schmidt in der Bundesrepublik Deutschland als Preisträger der Alexander von Humboldt-Stiftung geschrieben.     

Groups in which every non-abelian subgroup is permutable

A subgroupH of a groupG is said to bepermutable ifHX=XH for every subgroupX ofG. In this paper the structure of groups in which every subgroup either is abelian or permutable is investigated. This work was done while the last author was visiting the University of Napoli Federico II. He thanks the “Dipartimento di Matematica e Applicazioni” for its financial support.     

Synthese und Eigenschaften von Sr3Mo1.5Zn0.5O7‐δ, einer Phase mit perowskitverwandter Schichtstruktur

Synthesis and Properties of the Layered Perovskite Phase Sr₃Mo_1.5Zn_0.5O_7‐δ The new layered perovskite phase Sr₃Mo_1.5Zn_0.5O_7‐δ was synthesized by solid state reaction using a Zn/ZnO oxygen buffer. The crystal structure was refined from X‐ray powder pattern by the Rietveld method. The compound crystallizes tetragonal in the space group I4/mmm (no. 139) with the lattice parameters a = 3.9631(3) Å, c = 20.583(1) Å. An oxygen deficiency corresponding to δ ≈ 0.25 was determinated, indicating the presence of molybdenum in mixed valence (Mo⁴⁺ and Mo⁶⁺).     

Research problems

This section appears from time to time. Contributions are invited, and should be submitted to R. C. Thompson, Mathematics Department, University of California, Santa Barbara, CA 93106.     

Capabilities and limits of ICP-MS for direct determination of element traces in saline solutions

An ICP-MS method for the determination of ultra-traces of 24 Elements (Li, Be, Mg, Al, Cr, Mn, Co, Zn, Cu, Ga, As, Se, Rb, Sr, Mo, Ag, Cd, Sn, Sb, Ba, Tl, Pb, Bi, U) at ng/L to μg/L levels in highly saline solutions (up to 30 g/L NaCl) was developed. Calculated to the salt content of the samples, limits of detection at the sub-μg/kg level were obtained. This allows the measurement of samples like sea water, or clinical samples like urine, serum and whole blood, with few or without sample preparation and a drastic improvement to the limits of detection. Compared to the determination in solutions of 1 g/L NaCl the limits of detection in the original sample were improved by one order of magnitude. Improvements in instrumental stability are achieved by the use of an additional gas, that is introduced to the aerosol stream and avoids salt deposition in the aerosol tube of the torch, the use of High Matrix Content (HMC) cones, that show no clogging even at NaCl-concentrations up to 50 g/L. With this setup the long term stability for measurements with changing matrix concentrations is < 10% without and < 5% with use of an internal standard for the individual samples. Cleaning up is necessary after 2 days of operation. The direct analysis of the Nearshore Seawater Reference Material NRC-CNRC CASS3 showed a good agreement with the certified and measured concentrations. Elements, that do not suffer from an isobaric overlap of matrix compounds can be determined clearly at ng/L levels. Measurement of different matrix concentrations showed, that acceptable results can be achieved with a single calibration for concentrations from 5 g/L NaCl to 30 g/L NaCl, though matrix matching shows the best results.