A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%). Received: 4 November 1996 / Revised: 9 June 1997 / Accepted: 16 June 1997     

Anion-pi interactions in cyanuric acids: a combined crystallographic and computational study

Several structures of pi complexes of isocyanuric acid and of several thio derivatives with anions have been computed by using high level ab initio calculations. The nature of the complexes has been studied by means of the method of molecular interaction potential with polarization (MIPp) and Bader's theory of atoms-in-molecules. These molecules form favorable complexes with anions and can be used as binding units for building receptors for the molecular recognition of anions. In several cases, the anion-pi interaction has been demonstrated experimentally by means of X-ray crystallography.     

Tentoxin as a scaffold for drug discovery. Total solid-phase synthesis of tentoxin and a library of analogues

[reaction: see text] A solid-phase method for the synthesis of tentoxin has been developed. Two key steps-dehydration and N-alkylation-are carried out while the peptide is anchored to the resin. The method, which has been validated by the preparation of a library of tentoxin analogues, should be applicable to the generation of further libraries that have the tentoxin scaffold structure, as well as other structures containing N-alkylated didehydroamino acids.     

Local aromaticity of [n]acenes, [n]phenacenes, and [n]helicenes (n = 1-9)

The local aromaticity of the six-membered rings in three series of benzenoid compounds, namely, the [n]acenes, [n]phenacenes, and [n]helicenes for n = 1-9, has been assessed by means of three probes of local aromaticity based on structural, magnetic, and electron delocalization properties. For [n]acenes our analysis shows that the more reactive inner rings are more aromatic than the outer rings. For [n]phenacenes, all indicators of aromaticity show that the external rings are the most aromatic. From the external to the central ring, the local aromaticity varies in a damped alternate way. The trends for the [n]helicene series are the same as those found for [n]phenacenes. Despite the departure from planarity in [n]helicenes, only a very slight loss of aromaticity is detected in [n]helicenes as compared to the corresponding [n]phenacenes. Finally, because of magnetic couplings between superimposed six-membered rings in the higher members of the [n]helicenes series, we have demonstrated that the NICS indicator of aromaticity artificially increases the local aromaticity of their most external rings.     

Hydrogen-bonded networks in ethanol proton wires: IR spectra of (EtOH)qH+-Ln clusters (L = Ar/N2, q < or = 4, n < or = 5)

Isolated and microsolvated protonated ethanol clusters, (EtOH)qH+-Ln with L = Ar and N2, are characterized by infrared photodissociation (IRPD) spectroscopy in the 3 microm range and quantum chemical calculations. For comparison, also the spectrum of the protonated methanol dimer, (MeOH)2H+, is presented. The IRPD spectra carry the signature of H-bonded (EtOH)qH+ chain structures, in which the excess proton is either strongly localized on one or (nearly) equally shared between two EtOH molecules, corresponding to Eigen-type ion cores (EtOH2+ for q = 1, 3) or Zundel-type ion cores (EtOH-H+-HOEt for q = 2, 4), respectively. In contrast to neutral (EtOH)q clusters, no cyclic (EtOH)qH+ isomers are detected in the size range investigated (q < or = 4), indicative of the substantial impact of the excess proton on the properties of the H-bonded ethanol network. The acidity of the two terminal OH groups in the (EtOH)qH+ chains decreases with the length of the chain (q). Comparison between (ROH)qH+ with R = CH3 and C2H5 shows that the acidity of the terminal O-H groups increases with the length of the aliphatic rest (R). The most stable (EtOH)qH+-Ln clusters with n < or = 2 feature intermolecular H-bonds between the inert ligands and the two available terminal OH groups of the (EtOH)qH+ chain. Asymmetric microsolvation of (EtOH)qH+ with q = 2 and 4 promotes a switch from Zundel-type to Eigen-type cores, demonstrating that the fundamental structural motif of the (EtOH)qH+ proton wire sensitively depends on the environment. The strength of the H-bonds between L and (EtOH)qH+ is shown to provide a rather sensitive probe of the acidity of the terminal OH groups.     

New ruthenium(II) complexes with enantiomerically pure bis- and tris(pinene)-fused tridentate ligands. Synthesis, characterization and stereoisomeric analysis

A new set of Ru-Cl complexes containing either the pinene[5,6]bpea ligand (L1) or the C3 symmetric pinene[4,5]tpmOMe (L2) tridentate ligand in combination with the bidentate (B) 2,2'-bipyridine (bpy) or 1,2-diphenylphosphinoethane (dppe) with general formula [RuCl(L1 or L2)(B)](+) have been prepared and thoroughly characterized. In the solid state, X-ray diffraction analysis techniques have been used. In solution, cyclic voltammetry (CV) and 1D and 2D NMR spectroscopy have been employed. DFT calculations have been also performed on these complexes and their achiral analogues previously reported in our group, to interpret and complement experimental results. Whereas isomerically pure complexes ([Ru(II)Cl(L2)(bpy)](BF4), 5 and [Ru(II)Cl(L2)(dppe)](BF4), 6) are obtained when starting from the highly symmetric [Ru(III)Cl3(L2)], 2, isomeric mixtures of cis, fac-[Ru(II)Cl(L1)(bpy)](BF4) (3b/3b'), trans,fac- (3a) and up/down,mer- (3c, 3d) isomers are formed when bpy is added to the less symmetric [Ru(III)Cl3(L1)], 1, in contrast to the case of the bulky dppe ligand that, upon coordination to 1, leads to the trans,fac-[Ru(II)Cl(L1)(dppe)](BF4) (4a) complex as a sole isomer due to steric factors.     

Diastereoselective fragmentation of chiral alpha-aminophosphonic acids/metal ion aggregates

Diastereomeric clusters of general formula [MAB(2)](+) and [MA(2)B](+) (M = Li(I), Na(I), Ag(I), Ni(II)-H, or Cu(II)-H; A = (R)-(-)- and (S)-(+)-(1-aminopropyl)phosphonic acid; B = (1R)-(-)- and (1S)-(+)-(1-aminohexyl)phosphonic acid) have been readily generated in the electrospray ionization (ESI) source of a triple-quadrupole mass spectrometer and their collision-induced dissociation (CID) investigated. CID of diastereomeric complexes, e.g. [MA(S)(B(S))(2)](+) and [MA(R)(B(S))(2)](+), leads to fragmentation patterns characterized by R(homo) = [MA(S)B(S)](+)/[M(B(S))(2)](+) and R(hetero) = [MA(R)B(S)](+)/[M(B(S))(2)](+) abundance ratios, which depend upon the relative stability of the diastereomeric [MA(S)B(S)](+) and [MA(R)B(S)](+) complexes in the gas phase. The chiral resolution factor R(chiral) = R(homo)/R(hetero) is found to depend not only on the nature of the M ion but also on that of the fragmenting species, whether [MAB(2)](+) or [MA(2)B](+). The origin of this behavior is discussed.     

Determination of aflatoxins in hazelnuts by various sample preparation methods and liquid chromatography-tandem mass spectrometry

A sensitive and reliable liquid chromatography-tandem mass spectrometric with electrospray ionization method for determining aflatoxins in hazelnuts has been developed. Three different extraction techniques, such as homogenization, ultrasonic extraction, and matrix solid phase dispersion have been tested and compared in terms of recovery, matrix effect, accuracy and precision. Ultrasound extraction was the most performing sample preparation method. Absolute recoveries for analytes and I.S. ranged from 93 to 101%. Accuracy and precision were calculated using matrix matched calibration, and ranged 91-102% and 2-11%, respectively. CC alpha and CC beta for aflatoxin B1 (EU limit=2 microg/kg) were 2.15 and 2.33 microg/kg, respectively. A ruggedness test performed on three other matrices demonstrated that sonication time was critical and a matrix matched calibration must be constructed for every sort of matrix.     

Insights into Structure Direction of Microporous Aluminophosphates: Competition between Organic Molecules and Water

A combination of experimental characterisation techniques and computational modelling has allowed us to gain insight into the molecular features governing structure direction in the synthesis of microporous aluminophosphates. The occlusion of three different structure‐directing agents (SDAs), triethylamine (TEA), benzylpyrrolidine (BP) and (S )‐(?)‐N‐benzylpyrrolidine‐2‐methanol (BPM), within the AFI structure during its crystallisation, together with the simultaneous incorporation of water, has been experimentally measured. We found a higher incorporation of organic molecules in the structure obtained with BPM, while a higher water (and lower organic) content is found for the ones obtained with TEA and BP as SDAs. The computational study provides a thermodynamic explanation for the observed behaviour in terms of the relative stabilisation energy of the SDAs and water molecules within the AFI framework compared with when they are in aqueous solution, and demonstrates that a competition for preferential occupation exists between water and organic SDAs, which is a function of the interaction with the inorganic framework. The lower interaction of TEA and BP molecules with the AFI structure promotes the simultaneous incorporation of water molecules in the 12‐membered‐ring (MR) channel, to increase the host–guest interaction energy and thus the thermodynamic stability. The presence of strongly interacting methanol groups in the BPM molecules leads to the incorporation of only organic molecules within the 12‐MR channels. Our results demonstrate the essential role that water molecules play in the stabilisation of hydrophilic microporous aluminophosphates; a minimum amount of organic SDA is, however, essential for a templating role of the microporous architecture.     

Interplay between intramolecular resonance-assisted hydrogen bonding and aromaticity in o-hydroxyaryl aldehydes

In this work, we analyze a series of o-hydroxyaryl aldehydes to discuss the interrelation between the resonance-assisted hydrogen bond (RAHB) formation and the aromaticity of the adjacent aromatic rings. As compared to the nonaromatic reference species (malonaldehyde), the studied compounds can be separated into two groups: first, the set of systems that have a stronger RAHB than that of the reference species, for which there is a Kekulé structure with a localized double CC bond linking substituted carbon atoms; and second, the systems having a weaker RAHB than that of the reference species, for which only pi-electrons coming from a localized Clar pi-sextet can be involved in the RAHB. As to aromaticity, there is a clear reduction of aromaticity in the substituted ipso ring for the former group of systems due to the formation of the RAHB, while for the latter group of species only a slight change of local aromaticity is observed in the substituted ipso ring.