First Total Synthesis of 12-Hydroxy-13-methylpodocarpa-9, 11, 13-trien-3-one

12-Hydroxy-13-methylpodocarpa-9, 11, 13-trien-3-one 9 was isolated from the twigs ofCroton salutaris1. Many diterpenes exhibit significant bioactivities, such as antibac-terial and antitumour and 9 has a rare structure. In order to study the relationshipb…     

基于反相位脉冲技术的生物组织谐波成像研究

理论及实验研究了反相位脉冲技术在生物组织二次谐波成像中的应用。结合有限振幅声波的非线性传播理论,从理论上证明了反相位脉冲技术可有效抑制基波信号,同时二次谐波信号增强两倍,轴向及径向声场的实验测量结果基波被抑制30～50dB,二次谐波提高6dB,与理论相符。建立了相应的成像系统,对若干生物离体组织进行了基于反相位脉冲相位技术的二次谐波成像,并与常规的基波及二次谐波图像对比,进一步证明了该技术能有效提高图像的对比度和清晰度。     

13.5—14.6MeV中子能区锗的同位素反应截面的测量

报道了在13.5—14.6MeV中子能区用活化法测得的⁷⁶Ge(n,2n)⁷⁵Ge, ⁷⁰Ge(n,2n)⁶⁹Ge, ⁷⁰Ge(n, p)⁷⁰Ga, ⁷²Ge(n,p)⁷²Ga, ⁷³Ge(n,p)⁷³Ga, ⁷²Ge(n,α)^69mZn和⁷⁴Ge(n, α)^71mZn的反应截面值. 中子注量用⁹³Nb(n,2n)^92mNb反应截面得到. 单能中子由T(d,n)⁴He反应获得. 同时还列举了已收集到的文献值以作比较.     

Design of Two-Dimensional Photonic Crystal Edge Emitting Laser for Photonic Integrated Circuits

An edge emitting laser based on two-dimensional photonic crystal slabs is proposed. The device consists of a square lattice microcavity, which is composed of two structures with the same period but different radius of air-holes, and a waveguide. In the cavity, laser resonance in the inner structure benefits from not only the anomalous dispersion characteristic of the first band-edge at the M point in the first Brillouin-zone but also zero photon states in the outer structure. A line defect waveguide is introduced in the outer structure for extracting photons from the inner cavity. Three-dimensional finite-difference time-domain simulations apparently show the in-plane laser output from the waveguide. The microcavity has an effective mode volume of about 3.2（λ/nslab）^3 for oscillation mode and the quality factor of the device including line defect waveguide is estimated to be as high as 1300.     

Electrical and pyrometric measurements of the decay of the anodetemperature after interruption of high-current vacuum arcs andcomparison with computations

Vacuum arcs of up to 20-kA peak current were investigated. The surface temperature of the anode area melted during the anode spot mode was determined by pyrometry and the evaluation of thermionic currents. The measurements confirm the computations of heating and cooling of the anode, taking into account heat conduction melting/solidification, and evaporation. Pyrometrically obtained temperatures agree well with theory. This gives confidence in the heat conduction model and also shows that the boiling temperature was reached during arcing. Another method evaluates currents of a milliampere value after arcs of several kiloamperes and postarc currents of amperes. Experimental observation (e.g., loading of the shield surrounding the contacts) and theoretical analysis of the interfering effects support the idea that the currents measured are due to thermionic emission     

Chemoselective Catalytic Hydrogenation of α,β-Unsaturated Ketones and α,β-Unsaturated Carboxylic Esters

ＣｈｅｍｏｓｅｌｅｃｔｉｖｅＣａｔａｌｙｔｉｃＨｙｄｒｏｇｅｎａｔｉｏｎｏｆα，β┐ＵｎｓａｔｕｒａｔｅｄＫｅｔｏｎｅｓａｎｄα，β┐ＵｎｓａｔｕｒａｔｅｄＣａｒｂｏｘｙｌｉｃＥｓｔｅｒｓＺＨＡＮＧＪｉｎｇ－ｗｅｎ＊，ＺＨＡＯＪｉａｎ－ｚｈａｎｇ，Ｚ...     

对称双吡咯甲烷的合成与分子内氢键的研究

５－甲基吡咯－２－羧酸酯在磺酰氢，溴或四乙酸铅作用下，生成相应的在５－甲基上含取代基的产物，后者不经分离不便可自缩合得标题化合物，核磁共振氢谱研究和分子构象木匠，当３，３位的取代基为甲酸（酯）基或乙酸（酯）基时，可形成３，３位酯基与另一吡咯环上的氮氢之间的分子内氢键，而３，３位是其它取代基，如乙酰基，丙酸（酯）基，丁酸（酯）基时不能形成类似的分子内氢键。     

饱和水蒸汽与水的焓与熵参数的新关联式

饱和水蒸汽与水的焓与熵参数的新关联式李斯特，马润梅，吴冷（北京化工大学机械工程系北京１０００２９）关键词统计力学，剩余函数，焓与熵１引言本文根据统计力学与热力学剩余函数原理，结合本课题组曾已建立的饱和水蒸汽与水的新简明状态方程模型，经推导出一则适合于...     

INFLUENCE OF COMPOSITIONAL HETEROGENEITY ON MORPHOLOGY AND PROPERTIES OF SEGMENTED COPOLYMERS

Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones.