Effects of type and physical properties of oil phase on oil-in-water emulsion droplet formation in straight-through microchannel emulsification, experimental and CFD studies

Straight-through microchannel (MC) emulsification is a novel technique for formulating monodisperse emulsions using an array of micrometer-sized channels vertical to the surface of a silicon plate (a straight-through MC). We studied the effects of the type and physical properties of the dispersed oil phase and of the surfactant concentration on droplet formation from a straight-through MC by experiments and computational fluid dynamics (CFD) simulations. Monodisperse oil-in-water emulsions with coefficients of variation below 4% were formulated from an oblong straight-through MC using silicone oils, tetradecane, medium-chain triglyceride, soybean oil, and liquid paraffin as the oil phase. At oil viscosities (eta(d)) lower than a threshold value of 100 mPa s, the values of the resultant droplet diameter (d(ex)) gradually decreased with increasing eta(d), whereas they were not affected by the surfactant concentration. Conversely, at eta(d) higher than the threshold value, the d(ex) values significantly increased with increasing eta(d), and they were affected by the surfactant concentration. An analysis on the basis of droplet formation time and interfacial tension clarified that the trends in d(ex) at eta(d) above the threshold value would be caused by the significant decrease in the dynamic interfacial tension during droplet formation. We thus discovered that the dynamic interfacial tension is also a parameter affecting the d(ex) along with eta(d) in straight-through MC emulsification. CFD simulations using a three-dimensional (3D) model including a straight-through MC confirmed successful formation of micrometer-sized droplets for the above-mentioned oils. The experimental and CFD results for the resultant droplet size were compared using the dimensionless droplet diameter (d, droplet diameter/channel equivalent diameter). The d(CFD) values agreed well with the d(ex) values at eta(d) below the threshold value of 100 mPa s for all the experiment systems and at eta(d) above the threshold value for the experiment systems that did not contain a surfactant.     

High-resolution analysis of polyprenols by supercritical fluid chromatography

A high-resolution analysis of polyprenol mixtures was achieved by supercritical fluid chromatography (SFC). The separation of polyprenols was examined on an octadecylsilane-packed column with liquid carbon dioxide as the mobile phase and ethanol as modifier. Using this chromatography system, the resolution of separation (Rs) between octadecaprenol (prenol 18) and nonadecaprenol (prenol 19) was two times higher than that using conventional reversed-phase high-performance liquid chromatography. Our SFC technique allows the advantage of baseline separation of polyprenol samples containing hydrophobic components such as terpenes or fatty acids that are unfavorable for good separation. This method is very useful for the analysis of structurally close polyprenol analogues of rubber plant metabolites.     

Novel asymmetric through-hole array microfabricated on a silicon plate for formulating monodisperse emulsions

We have proposed a novel microchannel (MC) structure for formulating monodisperse emulsions. The emulsification device is a silicon array of microfabricated, asymmetric through-holes with a slit and a circular channel (an asymmetric straight-through MC). The asymmetric through-holes of a uniform size stably yielded monodisperse emulsions with average droplet diameters of 35-41 mum and coefficients of variation of less than 2% by forcing the to-be-dispersed phase into the continuous phase via the through-holes. Their asymmetry enabled the stable formation of monodisperse emulsion droplets by spontaneous transformation, even using a to-be-dispersed phase with a very low viscosity below 1 mPa s. Additionally, the asymmetric straight-through MC with a high-density through-hole layout has the potential for high-throughput formulation of monodisperse emulsions.     

DNA topology on an increase in positive writhing number of DNA: conformation changes in the time course of cis-diamminedichloroplatinum(II)-DNA adducts

We show that the topological significance of the gel mobility of cis-diamminedichloroplatinum(II) (DDP)-closed circular DNA (ccDNA) adducts decreases with reaction time, until a point at which it joins relaxed DNA, and that the mobility of the adducts increases again. There is no relationship between the relative length of the adducts and the gel mobility. Although the significance of the decrease of gel mobility is due to the unwinding of cis-DDP-DNA (or trans-DDP-DNA) adducts, the conformational significance of the subsequent increase in mobility is unclear. To elucidate the conformational significance for unwinding of the adducts, we measured the writhing number (Wk) of the adducts using electron microscopy and analyzed the topological states of cis-DDP (or trans-DDP) adducts based on the White rule, Lk=Wk+Tk. Where, Lk and Tk represent the linking and twisting number in the ring, respectively. From the data, we found that the Wk of cis-DDP-ccDNA adducts in comparison with trans-DDP-ccDNA adducts increases from a negative to a positive number with time. This suggests that cis-DDP plays a role in the change of the topological state of ccDNA. In the abstraction of platinum from the adducts with CN- ion, the differences in both topological states may explain why Pt in trans-DDP is abstracted more easily than in cis-DDP. To explain the abstraction of Pt ion, we also discuss the findings based on the thermodynamic cycle in a intermolecular crosslink model Pt(NH3)2(guanine)2(2+)-->Pt(CN)4(2-) using the Pt parametrized PM3 method.     

Hydrometallation of 1-alkyl-3-trifluoromethyl propargyl alcohols

The hydrometallation of trifluoromethylated propargyl alcohol derivatives with metal hydride reagents proceeds smoothly to give cis- and trans-olefins on H₂O quenching. The halodemetallation of intermediate formed in the reaction process was also examined.     

Cover Picture

The cover picture shows a section of the electron charge density of the first metal carbide endohedral metallofullerene (Sc(2)C(2))@C(84) obtained from a synchrotron X-ray powder diffraction study by the maximum entropy method (MEM). The several density maxima, which correspond to scandium and carbon atoms, are clearly seen inside the C(84) carbon cage. The MEM charge density distribution also reveals that the C(84) cage has D(2d) symmetry (no. 23) and that the C(2) axis is parallel to the <100> face-centered cubic (fcc) direction of the unit cell. As a consequence of the site symmetry being 4mm, the C(2) axis of (Sc(2)C(2))@C(84) is oriented to six equivalent <100> directions and shows a merohedral disorder. The resultant Sc small middle dot small middle dot small middle dotSc distances and C-C bond lengths of the Sc(2)C(2) cluster are 0.429(2) and 0.142(6) nm, respectively. The observed C-C bond length is between that of a typical single and a double bond, and is very close to that of the C-C bond (0.143 nm) combining two pentagons in a C(60) molecule. More about this fascinating structure can be found in the contribution by Shinohara and co-workers on p. 397 ff.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.     

Studies on antitumor agents. IX. Synthesis of 3'-O-benzyl-2'-deoxy-5-trifluoromethyluridine

A practical synthesis of 3'-O-benzyl-2'-deoxy-5-trifluoromethyluridine (1), a candidate antitumor agent for clinical testing, was developed from 2'-deoxy-5-iodouridine (3). Benzylation of 2'-deoxy-5-iodo-5'-O-trityluridine (14) with benzyl bromide and sodium hydride in tetrahydrofuran gave the 3'-O-derivative (16). Benzoylation of 16 afforded the N3-benzoyl derivative (17). Coupling of 17 with trifluoromethylcopper, prepared from bromotrifluoromethane and copper powder in the presence of 4-dimethylaminopyridine, gave the 5-trifluoromethyl derivative (19) minimally contaminated with the 5-pentafluoroethyl compound. Deprotection of 19 furnished 1.     

Assembly of Carbohydrates on a Nickel(II) Center by Utilizing N-Glycosidic Bond Formation with Tris(2-aminoethyl)amine (tren). Syntheses and Characterization of [Ni{N-(aldosyl)-tren}(H(2)O)](2+), [Ni{N,N'-bis(aldosyl)-tren}](2+) and [Ni{N,N',N"-tris(aldosyl)-tren}](2+)

Reactions of [Ni(tren)(H(2)O)(2)]X(2) (tren = tris(2-aminoethyl)amine; X = Cl (1a), Br (1b); X(2) = SO(4) (1c)) with mannose-type aldoses, having a 2,3-cis configuration (D-mannose and L-rhamnose), afforded {bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine}nickel(II) complexes, [Ni(N,N'-(aldosyl)(2)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (2a), Br (2b), X(2) = SO(4) (2c); aldosyl = L-rhamnosyl, X(2) = SO(4) (3c)). The structure of 1c was confirmed by X-ray crystallography to be a mononuclear [Ni(II)N(4)O(2)] complex with the tren acting as a tetradentate ligand (1c.2H(2)O: orthorhombic, Pbca, a = 15.988(2) ?, b = 18.826(4) ?, c = 10.359(4) ?, V = 3118 ?(3), Z = 8, R = 0.047, and R(w) = 0.042). Complexes 2a,c and 3c were characterized by X-ray analyses to have a mononuclear octahedral Ni(II) structure ligated by a hexadentate N-glycoside ligand, bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine (2a.CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 16.005(3) ?, b = 20.095(4) ?, c = 8.361(1) ?, V = 2689 ?(3), Z = 4, R = 0.040, and R(w) = 0.027. 2c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.93(2) ?, b = 21.823(8) ?, c = 9.746(2) ?, V = 3176 ?(3), Z = 4, R = 0.075, and R(w) = 0.080. 3c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.560(4) ?, b = 21.694(5) ?, c = 9.786(2) ?, V = 3091 ?(3), Z = 4, R = 0.072, and R(w) = 0.079). The sugar part of the complex involves novel intramolecular sugar-sugar hydrogen bondings around the metal center. The similar reaction with D-glucose, D-glucosamine, and D-galactosamine, having a 2,3-trans configuration, resulted in the formation of a mono(sugar) complex, [Ni(N-(aldosyl)-tren)(H(2)O)(2)]Cl(2) (aldosyl = D-glucosyl (4b), 2-amino-2-deoxy-D-glucosyl (5a), and 2-amino-2-deoxy-D-galactosyl (5b)), instead of a bis(sugar) complex. The hydrogen bondings between the sugar moieties as observed in 2 and 3 should be responsible for the assembly of two sugar molecules on the metal center. Reactions of tris(N-aldosyl-2-aminoethyl)amine with nickel(II) salts gave the tris(sugar) complexes, [Ni(N,N',N"-(aldosyl)(3)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (6a), Br (6b); L-rhamnosyl, X = Cl (7a), Br (7b); D-glucosyl, X = Cl (9); maltosyl, X = Br (10); and melibiosyl, X = Br (11)), which were assumed to have a shuttle-type C(3) symmetrical structure with Delta helical configuration for D-type aldoses on the basis of circular dichroism and (13)C NMR spectra. When tris(N-rhamnosyl)-tren was reacted with NiSO(4).6H(2)O at low temperature, a labile neutral complex, [Ni(N,N',N"-(L-rhamnosyl)(3)-tren)(SO(4))] (8), was successfully isolated and characterized by X-ray crystallography, in which three sugar moieties are anchored only at the N atom of the C-1 position (8.3CH(3)OH.H(2)O: orthorhombic, P2(1)2(1)2(1), a = 16.035(4) ?, b = 16.670(7) ?, c = 15.38(1) ?, V = 4111 ?(3), Z = 4, R = 0.084, and R(w) = 0.068). Complex 8 could be regarded as an intermediate species toward the C(3) symmetrical tris(sugar) complexes 7, and in fact, it was readily transformed to 7b by an action of BaBr(2).     

Imaging of the bronchial blood flow usingg RI-angiography--study on its procedure and application of dual radioisotope technique (author's transl)

RI-angiography with 99mTcO4- was carried out using a scintillation camera with a digital minicomputer for the purpose of imaging of bronchial blood flow in various lung diseases, and as application of dual radioisotope techniques, other imagings such as tumor imaging with 197HgCl2 or 67Ga-citrate and/or perfusion imaging with 99mTc-MAA, were performed simultaneously in patients remaining the same position, too. The image as a iso-count map extracted out of the image of 197HgCl2, 67Ga-citrate or 99mTc-MAA, was superimposed to the brightness image of RI-anigogram (aortic phase). By these procedures, the image of bronchial blood flow were obtained in some patients with lung cancer, pulmonary tuberculosis, lung abscess, and chronic bronchitis. The dual radioisotope techniques using RI-angiography and the other imaging were useful to make isotope diagnosis of lung diseases more reliable, and the image superimposition methods using RI-angiogram and the image of tumor or perfusion, were useful to improve anatomic orientation of the former.