Improvement of water vapor adsorption ability of natural mesoporous material by impregnating with chloride salts for development of a new desiccant filter

The aim of this study is the development of a new adsorbent for the desiccant material which can be regenerated by the domestic exhaust heat by using natural mesoporous material, Wakkanai siliceous shale. To improve this shale’s performance to adsorb/desorb the water vapor, lithium chloride, calcium chloride or sodium chloride was supported into the mesopores by impregnating with each chloride solution. Especially sodium chloride was effective to increase the water vapor adsorption amount 5–7 times of that of natural shale in the relative humidity range from 50 to 70%. Moreover, the appropriate impregnating concentrations were determined as 5wt% from the relationship between the maximum water vapor adsorption amount and the mesopore volume. Based on these results, a new desiccant filter has been developed by impregnated original paper with lithium chloride and sodium chloride. This paper contained shale powder in the synthetic fibers. The dehumidification performance of this filter was evaluated under the simulated summer condition in Tokyo. From the cyclic adsorption/regeneration test, this shale and chlorides filter could adsorb and desorb 60 g/h water vapor repeatedly at the regeneration temperature of 40°C. On the other hand, a silica gel filter and a zeolite filter adsorbed and desorbed only 10 g/h and 25 g/h, respectively. These results suggested that the shale impregnated with the chlorides has the best dehumidification ability as a new desiccant material. Further, the desiccant filter made from the shale will achieve the effective use of the low temperature exhaust heat.     

Asymmetric intramolecular Cannizzaro reaction of anhydrous phenylglyoxal

The use of anhydrous phenylglyoxal provides a solution to the problem of low reactivity in the asymmetric intramolecular Cannizzaro reaction with alcohols. Double asymmetric induction was achieved in the reaction of anhydrous phenylglyoxal with d-(+)-menthol promoted by a (S,S)-t-BuBox·copper(II) hexafluoroantimonate complex.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Design of a small-molecule catalyst using intramolecular cation-pi interactions for enantioselective Diels-Alder and Mukaiyama-Michael reactions: L-DOPA-derived monopeptide.Cu(II) complex

[reaction: see text] We have designed a small-molecule artificial metalloenzyme that is prepared in situ from Cu(OTf)(2) or Cu(NTf(2))(2) (1.0 equiv) and l-DOPA-derived monopeptide (1.1 equiv). This catalyst (2-10 mol %) is highly effective for the enantioselective Diels-Alder (DA) and Mukaiyama-Michael (MM) reactions with alpha,beta-unsaturated 1-acyl-3,5-dimethylpyrazoles. The present results demonstrate that cation-pi interactions may be available for controlling the conformation of sidearms of chiral ligands, and monopeptides are readily tunable ligands that include only one chiral center.     

Reheating decomposition process as chemical recycling for rigid polyurethane foam

We have found that a reheating process for the products in the chemical recycling of rigid polyurethane foam by an extruder with diethanolamine as a decomposing agent is effective for improving the product stability. The product with stable viscosity was obtained by the reheating process at 175-200 °C for 2 h, regardless of the extruding condition. An amine adduct, which is an intermediate, was found to be the cause of instability of the discharged product from the extruder. At the initial stage of reheating, the intermediate decomposed, releasing toluenediamine, which promoted further decomposition of the discharged products. We have succeeded in controlling the quality of the recycled products.     

Uneven Dielectric Barrier Discharge Reactors for Diesel Particulate Matter Removal

Uneven dielectric barrier discharge (DBD) reactors driven by positive–negative pulse plasma discharges were investigated for particulate matter (PM) removal from a diesel engine. Two kinds of uneven alumina plates and three kinds of uneven stainless steel plates were used to assemble six kinds of uneven DBD reactors of discharge gaps 0.4–1.0 mm. The experimental results show that PM from diesel engines can be removed using the uneven DBD reactors. The maximum PM removal was 67% at 300 W energy injections using the DBD reactor of 0.4 mm gap distance. PM removal increased with decreasing gap distance. The energy efficiency using the uneven DBD reactor of a shorter gap distance was higher than that using the uneven DBD reactor of a longer gap distance as the uneven DBD reactor of a shorter gap distance has a higher PM deposition rate. The energy efficiency was typically in a range of 3–10.6 g/kWh at an energy density of 2–16 J/L. A comparison of this study with reports given by other research groups is given.     

Removal properties of diesel exhaust particles by a dielectric barrier discharge reactor

The removal properties of diesel exhaust particles (DEP) were investigated using an engine exhaust particle size spectrometer (EEPS), field emission-type scanning electron microscopy (FE-SEM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). DEP were treated using a dielectric barrier discharge (DBD) reactor installed in the tail pipe of a diesel engine, and a model DBD reactor fed with DEP in the mixture of N(2) and O(2). When changing the experimental parameters of both the plasma conditions and the engine load conditions, we obtained characteristic information of DEP treated with plasma discharges from the particle diameter and the composition. In evaluating the model DBD reactor, it became clear that there were two types of plasma processes (reactions with active oxygen species to yield CO(2) and reactions with active nitrogen species to yield nitrogen containing compounds). Moreover, from the result of a TOF-SIMS analysis, the characteristic secondary ions, such as C(2)H(6)N(+), C(4)H(12)N(+), and C(10)H(20)N(2)(+), were strongly detected from the DEP surfaces during the plasma discharges. This indicates that the nitrogen contained hydrocarbons were generated by plasma reactions.