Synthesis and applications of novel fluorinated dendrimer-type copolymers by the use of fluoroalkanoyl peroxide as a key intermediate

Fluoroalkanoyl peroxide reacted with 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TTRV-Si) to afford fluoroalkyl end-capped oligomers containing some unreacted vinyl segments under very mild conditions. Fluoroalkyl end-capped cyclosiloxane oligomers containing some vinyl segments thus obtained reacted with N,N-dimethylacrylamide and fluoroalkanoyl peroxide to afford new fluorinated dendrimer-type block copolymers in good isolated yield. Similar reactions were also occurred by the use of 1,3,5-trivinyl-1,3,5-trimethylcyclotrisiloxane instead of TTRV-Si, and the corresponding fluorinated dendrimer-type block copolymer was obtained in good isolated yield. These fluorinated dendrimer-type block copolymers had an excellent solubility not only in water but also in traditional organic solvents including aliphatic fluorinated solvents. Interestingly, these fluorinated block copolymers were found to form the self-assembled dendrimer-type polymeric aggregates in aqueous solutions. More interestingly, these fluorinated block copolymers had an extremely higher dispersion ability of not only single-walled carbon nanotube and fullerenes but also magnetic nanoparticles into water, compared to that of the corresponding two fluoroalkyl end-capped oligomers.     

Unidirectional crystallization of charged colloidal silica due to the diffusion of a base

Dilute aqueous dispersions of charged colloidal silica (particle volume fraction = approximately 0.03-0.04, particle diameter = 110 nm) exhibit unidirectional crystal growth due to the diffusion of a weak base, pyridine (Py). Similar diffusion-crystallization is enabled by a salt of a weak acid and a strong base, sodium hydrogen carbonate (NaHCO3). The resulting crystals consist of columnar (or cubic) crystal grains with a maximum height of a few centimeters and a maximum width of 1 cm. The crystal growth process is attributed to a combination of (i) the diffusion of Py or NaHCO3 accompanied by a charging reaction of the silica particles and (ii) the charge-induced crystallization of the silica colloids. Theoretical growth curves based on the reaction-diffusion model for the case of Py were in good agreement with the observed curves. We also report the immobilization of the resulting large crystals by using a polymer hydrogel matrix.     

Tuning the effective width of the optical stop band in colloidal photonic crystals

The optical stop band in colloidal crystals is characterized by the central frequency and bandwidth. Although the former is known to be highly tunable by changing the lattice constant, the latter is basically determined by the refractive index contrast between the particles and the background medium that is intrinsic to the materials. In this study, we show that the effective bandwidth in gelled colloidal crystals can also be tuned by controlling the fabrication conditions. Single-domain gelled colloidal crystals were prepared by photopolymerization under various photoirradiation conditions. It was observed that the width of the stop band in the transmission or reflectance spectrum could be expanded by simply adjusting the irradiation time.     

Preparation of novel fluoroalkyl-end-capped 2-acrylamido-2-methylpropanesulfonic acid cooligomeric nanoparticles containing adamantane units possessing a lower critical solution temperature characteristic in organic media

Fluoroalkyl-end-capped 2-acrylamido-2-methylpropanesulfonic acid cooligomers containing adamantyl segments were prepared by reaction of fluoroalkanoyl peroxide with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and 3-hydroxy-1-adamantyl acrylate (Ad-HAc). These obtained fluorinated AMPS-Ad-HAc cooligomers were found to form nanometer-size-controlled fine particles not only in water but also in a large variety of traditionally organic solvents. In addition, these fluorinated cooligomeric nanoparticles showed a good dispersibility in these solvents. Interestingly, the size of these fluorinated nanoparticles is extremely sensitive to solvent changes, and an increase of the particle size was observed in the solvents, in which the dielectric constant is higher or lower. More interestingly, these fluorinated AMPS-Ad-HAc cooligomeric nanoparticles exhibited a lower critical solution temperature around 52 degrees C in an organic medium (tert-butyl alcohol).     

Highly specific affinities of short peptides against synthetic polymers

We investigated polymer-binding 7-mer peptides that recognize differences in the polymer stereoregularity of all-purpose poly(methyl methacrylate)s (PMMAs) with simple chemical structures. Quantitative surface plasmon resonance measurements detected association/dissociation processes of the peptides against PMMA film surfaces, followed by an estimation of kinetic parameters such as association/dissociation rate constants and affinity constants. Greater association and smaller dissociation constants of the peptides were observed against a target isotactic PMMA than the structurally similar reference syndiotactic PMMA, followed by greater affinity constants against the target. A c02 peptide composed of the Glu-Leu-Trp-Arg-Pro-Thr-Arg sequence showed the greatest affinity constant (2.8x10(5) M(-1)) for the target, which was 41-fold greater than that for the reference, thus demonstrating extremely high peptide specificities. The substitution of each amino acid of the c02 peptide to Ala (Ala scanning) clearly revealed the essential amino acids for the affinity constants; the essential order was Pro5>Thr6>Arg7>Glu1>Arg4. In fact, the shorter 4-mer peptide composed of the C-terminal Arg-Pro-Thr-Arg sequence of the c02 peptide still demonstrated strong target specificity, although the N-terminal 4-mer peptide Glu-Leu-Trp-Arg completely lost its specificity. The possible conformations modeled with Molecular Mechanics supported the significance of the Arg-Pro-Thr-Arg sequence. The thermodynamic parameters of the c02 peptide suggested an induced fit mechanism for the specific affinity. The present affinity analyses of polymer-recognizing peptides revealed significant and general information that was essential for potential applications in peptidyl nanomaterials.     

The Japanese perspective on TIMSS

The International Association for the Evaluation of Educational Achievement (IEA) undertook three international mathematics studies: the first, FIMS, in 1976, the second, SIMS, in 1980, and the third, TIMSS, in 1995, 13-year-old Japanese students were included in these studies. The purpose of this paper is to discuss the level of mathematics achievement and attitudes toward mathematics among Japanese students and the situation of mathematics education in Japan, based on the results of TIMSS and previous studies. From our analysis of results, we can indicate the following points: although achievement in the fundamental techniques of calculation can be viewed in general as satisfactory, the attainment levels cannot be regarded as acceptable for problems which require a high degree of thinking and comprehension. And from the consequence of international comparison about interest and attitude, it became evident that a smaller fraction of Japanese students have a favorable opinion than in other countries.     

Near-field optical imaging using force detection with new tip-electrode geometry

We propose a new tip-electrode geometry to detect an (optical) evanescent field using noncontact atomic force microscopy. Using a semi-transparent metal electrode on the prism surface, the force sensitivity due to evanescent field in new tip-electrode geometry was enhanced by a factor of about 1000, comparing with that in old tip-electrode geometry where electrode was located behind the prism. Furthermore, this tip-electrode geometry avoids the electrostatic field caused by the residual charges and contact-electrified charges near the prism surface, which affects the force sensitivity due to evanescent field. We demonstrated the high resolution imaging of the evanescent field on the Au film with 15-nm (λ/33) lateral resolution.     

Directional Solidification of Faceting Material in a Centrifuge

In situ observation of directional solidification of salol was carried out at a centrifuge acceleration of 10 G (G = 9.81 m/s²). Growth rate, temperature distribution and flow pattern in front of the solid-liquid interface could be simultaneously measured and visualized using a microscopic interferometer and thermocouples. The specimens were transparent, faceting organic compounds, which develop cellular arrays. These materials of commercial grade were purified by several zone-refining cycles on a laboratory scale and were enclosed in quartz glass cells. The solidification were controlled by the imposed temperature gradient in the cell and cooling rate at the both side of the cell. The growth direction was adjusted to opposite to the acceleration vector. We found appearance of a local recalescence region in front of the growing surface not only under 1 G but 10 G. The uniformity of the recalescence region along the interface seemed to be defined by the flow induced by the centrifuge acceleration. We considered the non-uniform temperature distribution ahead of the interface as one of the driving forces of the interface breakdown.     

Quadruple Decker [3.3][3.3][3.3]Orthocyclophane Acetal—An Orthocyclophane Ladder

Through clever bridging of orthocyclophanes (in this case by acetalization), molecules such as 1 can be formed with four benzene rings in a stacked face-to-face arrangement. UV/Vis spectroscopic and electrochemical properties of 1 are governed by π–π through-space interactions within the molecule.