Jet ejection from droplets near the Leidenfrost temperature

Abstract  

Droplets impinging on a hot surface that is near the Leidenfrost temperature were experimentally investigated. Ejection of jets from the top of the droplet was observed during the transient interaction between the droplet and a hot wall. We term this phenomenon jet ejection from droplets. When the bottom of the droplet initially impacts the hot surface, a jet is to be ejected from the top of the droplet. The jet ejection occurred only at low impact velocities and around the wetting limit temperature. It was not observed when droplets were dropped from large heights or when the surface was at a high temperature.     

Polytopal estimate of Mirkovi?–Vilonen polytopes lying in a Demazure crystal

In this paper, we give a polytopal estimate of Mirkovi?–Vilonen polytopes lying in a Demazure crystal in terms of Minkowski sums of extremal Mirkovi?–Vilonen polytopes. As an immediate consequence of this result, we provide a necessary (but not sufficient) polytopal condition for a Mirkovi?–Vilonen polytope to lie in a Demazure crystal.     

Deformation Electron-Density Distributions of Tetraazathiapentalenes with Hypervalent S-N Bonds

Abstract

The deformation electron-density distributions of 6a-thia-1,3,4,6-tetraazapentalene derivatives (I, II) and bis(phenylthio)dibenzothiophene (III) were investigated by the X-ray diffraction method. For I and II, a structure around the hypervalent S-N bonds is a trigonal bipyramid with equatorial sp² hybrid of S-C bond and lone-pair electrons and apical polarized S-N bonds. In 111 lone-pair electron densities are observed perpendicular to the thiophene ring and the C-S-C sulfide planes.     

Polymerization of Acrolein by Imidazole

Polymerization of acrolein(AL) in the presence of imidazole(Im) has been investigated in tetrahydrofuran or methanol below room temperature. The polymers obtained, white or pale yellow powders, were found to be composed of vinyl polymer with one Im group attached and having an aldehyde side chain, of which 70–80 mole % of the aldehyde revealed bridge structure. The number-average molecular weight (M _n) of these polymers was determined to be in the range of 317 to 691. The rate of polmerization R_p was expressed by the equation, R + k[Im] [AL]².

The addition of water or dimethyl sulfoxide accelerated the polymerization reaction, while the presence of benzaldehyde or N,N'-dimethylformamide decreased R_p. The structure of addition products in the initial polymerization step was confirmed by IR and NMR spectra, and the observations of polymerization system was carried out by UV and NMR spectra. The polymerization mechanisms were discussed on the basis of these results.     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.     

Determination of oil–water partition coefficients of polar compounds: silicone membrane equilibrator vs. SPME passive sampler

Experimental determination of oil-water partition coefficients often poses difficulties associated with emulsion formation. The aim of this work was to find an appropriate technique for determination of oil–water partition coefficients of polar, nonvolatile compounds. Two different methods were tested. The first method used a “silicone membrane equilibrator.” For the second method, solid-phase microextraction (SPME) fibers with a polyacrylate (PA) coating were used as a passive sampler. With both methods, oil–water partition coefficients for 14 compounds with polar functional groups were determined at 37 °C with good repeatability (standard deviation 0.11 log units or lower). The partition coefficients determined with the silicone membrane equilibrator method ranged from 0.50 to 3.49 log units. The oil–water partition coefficients obtained with the PA-SPME passive sampling approach were significantly higher than those obtained with the silicone membrane equilibrator method for nine of 14 compounds. The differences were up to 0.39 log units (i.e., a factor of 2.5). Additional experiments suggested that this difference occurred because the sorption properties of the PA fibers used were influenced by the surrounding phase, e.g., through swelling of the polymer phase. Therefore, the SPME passive sampling method using PA fibers seems to be less reliable, whereas the silicone membrane equilibrator method was found to be a convenient technique for the determination of oil–water partitioning.     

Synthesis of novel 4′-C-methyl-1′,3′-dioxolane pyrimidine nucleosides and evaluation of its anti-HIV-1 activity

The key glycosyl donor for the target molecule 12 was prepared by two-step sequences; (1) acetalization of tert-butyldimethylsilyloxyacetaldehyde with 3-bromopropanediol, (2) DBN-initiated β-elimination of the resulting 2-(tert-butyldimethylsilyloxy)methyl-4-bromomethyl-1,3-dioxolane 11. Electrophilic glycosidation between 12 and silylated pyrimidine nucleobase proceeded efficiently to provide a mixture of β- and α-anomers of the respective glycosides 14 and 15. Tin radical-mediated reduction of the bromomethyl functional group of 14 and 15 gave protected 4′-C-methyl-dioxorane uracil- 16 and thymine nucleoside 17. The respective cytosine nucleoside 18 was synthesized from 16. De-silylation of 4′-methyl-1′,3′-dioxolane pyrimidine nucleosides 16–18 gave the target molecules. Evaluation of the anti-HIV-1 activity of the β- and α-anomers of the novel 4′-C-methyl-1′,3′-dioxolane nucleosides 22β,α–24β,α revealed that none of the nucleoside derivatives possess anti-viral activity against HIV-1 and show cytotoxicity against MT-4 cells at 100 μM.     

Visualizing Hepatic Copper Release in Long–Evans Cinnamon Rats Using Single-Photon Emission Computed Tomography

The potential utility of an imaging agent for the detection of hepatic copper was investigated in a Wilson’s disease animal model. Solid-phase peptide synthesis was used to construct an imaging agent which consisted of a copper-binding moiety, taken from the prion protein, and a gamma ray-emitting indium radiolabel. Long–Evans Cinnamon (LEC) rats were used for the Wilson’s disease animal model. Our evaluation methodology consisted of administering the indium-labeled agent to both LEC and genetically healthy Long–Evans (LE) cohorts via a tail vein injection and following the pharmacokinetics with single-photon emission computed tomography (SPECT) over the course of an hour. The animals were then sacrificed and their livers necropsied. An additional control agent, lacking the copper-binding moiety, was used to gauge whether any change in the hepatic uptake might be caused by other physiological differences between the two animal models. LEC rats injected with the indium-labeled agent had roughly double the amount of hepatic radioactivity as compared to the healthy control animals. The control agent, without the copper-binding moiety, displayed a hepatic signal similar to that of the control LE animals. Additional intraperitoneal spiking with CuSO₄ in C57BL/6 mice also found that the pharmacokinetics of the indium-labeled, prion-based imaging agent is profoundly altered by exposure to in vivo pools of extracellular copper. The described SPECT application with this compound represented a significant improvement over a previous MRI application using the same base peptide sequence.