Preparation of Pb2CrO5 thin films by an electron-beam evaporation technique

Pb₂CrO₅ thin films have been prepared by an electron-beam evaporation deposition technique on glass substrates using ceramic disks. The thin film fabrication conditions are studied by x-ray diffraction, replica electron micrography and scanning electron microscopy as parameters of substrate temperature, annealing temperature and annealing time. As-deposited Pb₂CrO₅ thin films in the amorphous state are crystallized by heat treatment. Annealed thin films are structurally classified into three types according to the preferred orientations which depend on substrate temperatures (T _s:

1. (i)

   (020) atT _s=room temperature

2. (ii)

   mainly (310) atT _s=100 ‡C, and

3. (iii)

   (200) atT _s=350 ‡C.

The substrate temperature contributes to film orientations; annealing temperature and time-enhance film crystallinity. The annealing temperature is fixed between 400 and 500 ‡C in making appropriate Pb₂CrO₅ thin films. These thin films, ranging between 0.3 and 2.0 Μm in thickness, are prepared at a deposition rate of 1500 å/m.

     

Phase-transfer reactions catalyzed by polymer-supported crown ethers

Polymer-supported crown ethers were prepared from chloromethylated or ω-bromoalkylated polystyrene resins and hydroxymethylbenzo-18-crown-6 and 15- or 18-membered monoazacrown ethers. Effects of the cavity size of crown ethers, the degree of crosslinking, the degree of ring substitution, particle size, spacer chains, and solvents on the activity of the polymer-supported crown ethers in the reaction of 1-chloro- or 1-bromo-octane with aqueous NaI or KI were investigated and mechanisms of the reaction were discussed in terms of mass transfer, intraparticle diffusion, and intrinsic reactivity.     

Synchronized sailing of two camphor boats in polygonal chambers

The synchronized self-motion of two camphor boats on polygonal water chambers was investigated. The two boats synchronously moved depending on the number of corners in the polygon by changing the distance between the two boats through the corners. We regard the self-motion of a camphor boat as an oscillator; i.e., one cycle on the polygonal chamber corresponds to 2pi. Phase-locked synchronization at a phase difference of 2pi/3, which corresponds to the length of one side of the chamber, was observed with a triangular chamber. Two types of synchronized motion at phase differences of pi/2 and pi, which correspond to the length of one and two sides of the chamber, respectively, were observed with a square chamber. These characteristic features of synchronized self-motion were qualitatively reproduced by a numerical calculation that regarded the surface tension as the driving force and the number of corners in the chamber as a velocity-regulating mechanism. We believe that the present system may be a simple model of synchronization which depends on the geometry of the system.     

Selective growth of ag nanowires on Si(111) surfaces by electroless deposition

Electroless deposition of Ag on atomically flat H-terminated Si(111) surfaces in aqueous alkaline solutions containing Ag ions produced two different sizes of Ag nanowires along atomic step edges: (1) a narrow nanowire of 10 nm in width and 0.5 nm in height and (2) a wide nanowire of 35 nm in width and 11 nm in height. The narrow and wide nanowires were formed by immersion in the solutions containing less than 1 ppb and 8 ppm dissolved-oxygen concentrations, respectively. This result indicates that the dissolved oxygen initiates the formation of Ag nucleation sites and that the fabrication method has a possibility of controlling the size of Ag nanowires.     

Synthesis of multisubstituted 1,3-butadienes using the ruthenium-catalysed double addition of trimethylsilyldiazomethane to alkynylboronates

The ruthenium-catalysed double addition of trimethylsilyldiazomethane to alkynes developed by Dixneuf and co-workers was applied to the synthesis of 2-alkyl- or 2-aryl-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1,4-bis(trimethylsilyl)-1,3-butadienes by use of alkynylboronates instead of alkynes. Di- and tetrasubstituted 1,3-butadienes were prepared from a 2-boryl-1,4-disilyl-1,3-butadiene, using the Suzuki-Miyaura coupling reaction, iodolysis of the alkenylsilane moieties with N-iodosuccinimide and hydrolysis of the carbon-silicon bonds with trifluoroacetic acid. The same compound was converted also to a bicyclic compound, a trisubstituted 1,3-butadiene and a dienone through the Diels-Alder reaction, oxidation of the alkenylboronate moiety and the Mukaiyama aldol reaction.     

19F NMR characterization of the thermodynamics and dynamics of the acid-alkaline transition in a reconstituted sperm whale metmyoglobin

A 19F NMR study on the acid-alkaline transition in sperm whale myoglobin reconstituted with a perfluoromethyl heme, 13,17-bis(2-carboxylatoethyl)-3,8-diethyl-2,12,18-trimethyl-7-trifluoromethylporphyrinatoiron(III), demonstrated that the thermodynamics of the transition is predominantly controlled by the stability of acidic form.