Observations of surface modifications induced by the multiple pulse irradiation using a soft picosecond x-ray laser beam

To study the interactions between picosecond soft x-ray laser (SXRL) beams and material surfaces, gold (Au), copper (Cu), and silicon (Si) surfaces were irradiated with SXRL pulses having a wavelength of 13.9 nm and a duration of ～7 ps. Following irradiation, the surfaces of the substrates were observed using a scanning electron microscope and an atomic force microscope. With single pulse irradiation, ripple-like structures were formed on the Au and Cu surfaces. These structures were different from previously investigated conical structures formed on an Al surface. In addition, it was confirmed that the development of modified structures, i.e., growth of hillocks on the Au and Cu surfaces, was observed after multiple SXRL pulse exposures. However, on the Si surface, deep holes that seemed to be melted structures induced by the accumulation of multiple pulses of irradiations were found. Therefore, it was concluded that SXRL beam irradiation of various material surfaces causes different types of surface modifications, and the changes in the surface behaviors are attributed to the differences in the elemental properties, such as the attenuation length of x-ray photons.     

Gamma-ray spectroscopy of the neutron-rich Ni region through heavy-ion deep-inelastic collisions

Nuclei in the neutron-rich Ni region have been studied by γ-ray spectroscopy. Gamma-rays emitted from isomers, with T _1/2 > 1 ns, produced in heavy-ion deep-inelastic collisions were measured with an isomer-scope. The nuclear structure of the doubly magic ⁶⁸Ni and its neighbor ^69,71Cu is discussed on the basis of the shell model. Future experiments for more neutron-rich Ni nuclei are also viewed. Received: 1 May 2001 / Accepted: 4 December 2001     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.     

Site selection NMR study on electronic state in and near vortex core of YBa2Cu4O8

We report a site-selective ¹⁷O spin-lattice relaxation rate T₁⁻¹ in the vortex state of YBa₂Cu₄O₈. We found that T₁⁻¹ at the planar sites exhibits an unusual nonmonotonic NMR frequency dependence. Based on T₁⁻¹ in the vortex core region, we establish strong evidence that the local density of states within the vortex core is strongly reduced.     

A differential geometrical consideration on a “nonlocal” field

In this paper, the concept of “nonlocality”, which is carried by the internal variable (ω) ascribed to each point (x), is first investigated generally in connection with the concept of “unified” gauge field. Next, as a typical example, a Finslerian “nonlocal” field is considered, which is obtained by taking for ω a vector (ξ), and two examples are proposed: one is a unified field with Randers metric and the other is a micro-gravitational field endowed with space-time fluctuation.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.