A new effect of ultrasonication on the formation of BaTiO3 nanoparticles

A new effect of ultrasonic irradiation on the formation of BaTiO₃ particles was identified. Ultrasonication caused the aggregation of the original 5–10 nm BaTiO₃ particles in the same crystal axis and accelerated the formation of BaTiO₃ particles significantly. Furthermore, narrow size distribution was obtained for the aggregated particles under ultrasonic irradiation.     

Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.     

Electronic transport in fullerene C20 bridge assisted by molecular vibrations

The effect of molecular vibrations on electronic transport is investigated with the smallest fullerene C20 bridge, utilizing the Keldysh nonequilibrium Green's function techniques combined with the tight-binding molecular-dynamics method. Large discontinuous steps appear in the differential conductance when the applied bias voltage matches particular vibrational energies. The magnitude of the step is found to vary considerably with the vibrational mode and to depend on the local electronic states besides the strength of electron-vibration coupling. On the basis of this finding, a novel way to control the molecular motion by adjusting the gate voltage is proposed.     

A video camera system for coaxial observation of a sample with an incident soft X‐ray beam

A video camera system for observing a sample from the direction of an incident soft X‐ray beam has been developed. The sample is seen via two reflecting mirrors. The first mirror, which has a hole to allow the soft X‐ray beam to pass through, is set on the beam axis in a vacuum. The second mirror is used to cancel out the mirror inversion of the image. This camera system is used for efficient positioning of samples in a soft X‐ray beam.     

Detection and grading for esophageal varices in patients with chronic liver damage: comparison of gadolinium-enhanced and unenhanced steady-state coherent MR images

The purpose of this study was to compare observer interpreted steady-state coherent coronal images and gadolinium-enhanced axial images in terms of the detection and grading of esophageal varices. Magnetic resonance imaging (MRI) and gastrointestinal endoscopy were performed within 2 weeks in 90 patients with chronic liver damage, including 55 with untreated esophageal varices, for periodic screening purposes. Two blinded readers retrospectively reviewed T1- and T2-weighted images with gadolinium-enhanced (gadolinium image set) and steady-state coherent (coherent image set) images. Sensitivity for the detection of esophageal varices was higher (P<.001) in the gadolinium image set (76%) than in the coherent image set (35%); on the other hand, specificity was higher (P<.001) in the coherent image set (91%) than in the gadolinium image set (66%). Furthermore, area under the ROC curve was higher for the gadolinium image set (Az=0.823) than the coherent image set (Az=0.761) (P=.48). Moderate and weak positive correlations with endoscopic grades were found for the gadolinium image (r=0.48, P<.01) and coherent image sets (r=0.34, P=.018). The addition of steady-state coherent imaging to the current routine liver imaging protocol did not improve the detection or grading of esophageal varices, whereas gadolinium-enhanced imaging was found to be potentially valuable. Nevertheless, endoscopy was confirmed to be mandatory in patients with esophageal varices suspected by MRI of the liver.     

The mechanism for negative photochromism of spiropyran in silica

The mechanism for negative photochromism of spiropyran in silica was investigated. Prior to our study, the chemical origin of the high thermal stability of the photomerocyanine form (PMC‐form) dispersed in perhydropolysilazane (PHPS), which is converted to silica at ambient temperature, had been investigated. The high thermal stability of the PMC‐form is attributed to the protonated PMC‐form (H???PMC‐form), which is produced by intermolecular hydrogen bonding between oxide anions generated by the cleavage of the C ? O bonds and the partially uncondensed Si ? OH and O ? H bonds of silica. Furthermore, the H???PMC‐form could be thermally isomerized from the SP‐form without UV light irradiation. This specific phenomenon is caused by the so‐called negative photochromism. In this study, we proposed a mechanism for negative photochromism according to the relationship of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The relationship between the HOMOs was determined using cyclic voltammetry (CV) and ultraviolet photoelectron spectroscopy (UPS). On the other hand, the relationship between the LUMOs was determined from the respective optical bandgap. As a result, the HOMO level of H???PMC‐form was ?6.1 eV and that of SP‐form was ?5.3 eV. Accordingly, the thermodynamic stabilization of H???PMC‐form was attributed to the thermal isomerization through negative photochromism from the SP‐form. Copyright © 2011 John Wiley & Sons, Ltd.     

Direct conversion of a metal organic compound to epitaxial Sb-doped SnO2 film on a (0 0 1) TiO2 substrate using a KrF laser, and its resulting electrical properties

Epitaxial Sb-doped SnO₂ (0 0 1) thin film on a TiO₂ (0 0 1) substrate was successfully prepared by laser-assisted metal organic deposition at room temperature. The effects of the precursor thin film and laser fluence on the resistivity, carrier concentration, and mobility of the Sb-doped SnO₂ film were investigated. The resistivity of the Sb-doped SnO₂ film prepared by direct irradiation to metal organic film is one order of magnitude lower than that of film prepared by irradiation to amorphous Sb-doped SnO₂ film. From an analysis of Hall measurements, the difference between the resistivity of the Sb-doped SnO₂ film prepared using the metal organic precursor film and that of amorphous precursor film appears to be caused by the mobility. Direct conversion of the metal organic compound by excimer laser irradiation was found to be effective for preparing epitaxial Sb-doped SnO₂ film with low resistivity.     

Study of Strangeness Photoproduction on the Neutron in the Threshold Region

Photoproduction of the neutral kaon on the deuteron has been investigated at the Research Center for Electron Photon Science, Tohoku University. We constructed the Neutral Kaon Spectrometer-2 for the detection of charged particles from the decay of the neutral kaon and the hyperon. We obtained a momentum distribution of K ⁰ with the inclusive measurement. It was consistent with the previous measurement. The total cross section of γ + d → K ⁰ + Λ + p was estimated from the measured integral cross section of γ + d → Λ + X. The total cross section with respect to the photon energy was compared with the theoretical calculations. It favored the Saclay-Lyon A model calculation with the ratio of the neutral to charged coupling constants of the axial-vector meson, K ₁, as ~ ?1.5. The energy dependence and the magnitude of the total cross section were similar to the total cross section of γ + p → K ⁺ Λ.     

Shear-induced ordering of lamellar and gyroid structures observed in a nonionic surfactant/water system

The shear-induced ordering of lamellar and gyroid structures of a nonionic surfactant C₁₆E₇/D₂O system in a Couette shear cell ( 0.001 < < 10 s^-1, : shear rate) has been investigated by using a small angle neutron scattering technique. In the lamellar phase, the steady shear flow having > 0.01 s^-1 suppresses undulation fluctuations of lamellae (Maxwell effect). This suppression of fluctuations brings two effects; 1) shear-induced lamellae ordering toward a parallel orientation and 2) obstruction of a lamellar↦gyroid transition. It is quite interesting to note that there is a characteristic shear rate range ( 0.01 < < 0.3 s^-1), where both effects take place. We have also investigated the shear effects on the gyroid phase. Below the characteristic shear rate range, the gyroid structure keeps three-dimensional network lattice, while above the characteristic shear rate range, the gyroid structure transforms to the parallel orientation lamellae (shear-induced gyroid-lamellar transition). Thus the shear flow having the characteristic shear rate plays very important roles in shear ordering phenomena. Received 26 June 2000 and Received in final form 12 January 2001     

High-Efficiency ZnCdSe/ZnSSe/ZnMgSSe Green Light-Emitting Diodes

Green light-emitting diodes (LEDs) were fabricated employing a ZnCdSe/ZnSSe triple quantum-well (TQW) active region surrounded by ZnMgSSe cladding layers grown on an n-type (100) GaAs substrate by molecular beam epitaxy (MBE). A 3.5 mW pure green emission was observed for the surface-emitting LED device at a peak wavelength of 513.3 nm (2.415 eV) with a spectral half-width of 11.7 nm (55 meV) under a 20 mA (4.6 V) direct current at room temperature (25°C). These correspond to an external quantum efficiency of 7.2%, a power conversion efficiency of 3.8%, a luminous current efficiency of 66 lm/A, and a luminous efficiency of 14 lm/W.