Preparation and characterization of two crystalline forms of 4-amino-5-chloro-2-methoxy-N-[(2S,4S)-1-ethyl-2-hydroxymethyl-4-pyrroli dinyl]benzamide (TKS159)

For 4-amino-5-chloro-2-methoxy-N-[(2S,4S)-1-ethyl-2-hydroxymethyl-4-pyrrolid inyl]benzamide (TKS159), two polymorphs, forms alpha and beta, were prepared and characterized by means of X-ray powder diffractometry, thermal analysis, infrared spectroscopy and 13C-NMR spectroscopy, both in the solution and solid phases. The X-ray powder diffraction analysis gave different patterns for forms alpha and beta. In the thermogravimetry and differential thermal analysis profiles, form beta exhibited characteristic endo- and exothermic peaks at 112.7 degrees C and 116.2 degrees C, respectively, due to the partial melting-induced phase transition to form alpha without accompanying weight loss, and these were followed by an additional endothermic peak at 138.2 degrees C due to fusion. For form alpha, only an endothermic peak at 137.8 degrees C due to fusion was observed. The IR spectroscopic analyses of forms alpha and beta gave different absorption bands assigned to N-H and O-H stretching, N-H bending, and C=O stretching vibrations. From the data obtained by thermal analysis, form alpha was shown to be thermodynamically more stable than form beta.     

Antioxidant Study and Assignments of NMR Spectral Data for 3′,4′,7-Trihydroxyflavanone 3′,7-Di-O-β-D-glucopyranoside (Butrin) and Its Hydrolyzed Product

The NMR spectral data including high resolution ¹H, ¹³C and 2D NMR for butrin, 3,4,7-trihydroxyflavanone 3,7-di-O--D-glucopyranoside, isolated from flowers of Butea monosperma, are reported here for the first time. Butrin was hydrolyzed using b-glucosidase to butin in high yield. They were subjected to free radical scavenging test using 2,2-diphenyl-1-picrylhydrazyl (DPPH) spectrophotometric assay. At a dose of 4 × 10^-8 mol of tested compounds, the percentage of reduced DPPH for butin was 14.5% while no reduction was observed for butrin (0%).     

Structure and photochemistry of nitrocobalt(III) tetraphenylporphyrin with axial triphenylphosphine in toluene solutions

Thermal and photochemical reactions of nitroaquacobalt(III) tetraphenylporphyrin, (NO(2))(H(2)O)Co(III)TPP, have been investigated in toluene solutions containing triphenylphosphine, P phi(3). It is found that Pphi(3) thermally abstracts an oxygen atom from the NO(2) moiety of (NO(2))(H(2)O)Co(III)TPP with a rate constant 0.52 M(-1) s(-1), resulting in the formation of nitrosylcobalt porphyrin, (NO)CoTPP. The 355-nm laser photolysis of (NO(2))(H(2)O)Co(III)TPP at low concentrations of P phi(3) (<1.0 x 10(-4) M) gives Co(II)TPP and NO(2) as intermediates. The recombination reaction of Co(II)TPP and NO(2) initially forms the coordinately unsaturated nitritocobalt(III) tetraphenylporphyrin, (ON-O)Co(III)TPP, which reacts with P phi(3) to yield nitro(triphenylphosphine)cobalt(III) tetraphenylporphyrin, (NO(2))(P phi(3))Co(III)TPP. Subsequently, the substitution reaction of the axial P phi(3) with H(2)O leads to the regeneration of (NO(2))(H(2)O)Co(III)TPP. From the kinetic studies, the substitution reaction is concluded to occur via a coordinately unsaturated nitrocobalt(III) porphyrin, (NO(2))Co(III)TPP. At higher concentrations of P phi(3) (>4 x 10(-3) M), (NO(2))(H(2)O)Co(III)TPP reacts with P phi(3) to form (NO(2))(P phi(3))Co(III)TPP: the equilibrium constant is obtained as K = 4.3. The X-ray structure analysis of (NO(2))(P phi(3))Co(III)TPP reveals that the P-Co-NO(2) bond angle is 175.0(2) degrees and the bond length Co-NO(2) is 2.000(7) A. In toluene solutions of (NO(2))(H(2)O)Co(III)TPP containing P phi(3) (>4 x 10(-3) M), the major light-absorbing species is (NO(2))(P phi(3))Co(III)TPP, which yields (NO)CoTPP by continuous photolysis. The laser photolysis of (NO(2))(P phi(3))Co(III)TPP gives Co(II)TPP, NO(2), and P phi(3) as initial products. The NO(2) molecule is suggested to be reduced by P phi(3) to yield NO, and the reaction between NO and Co(II)TPP gives (NO)CoTPP. The quantum yield for the photodecomposition of (NO(2))(P phi(3))Co(III)TPP is determined as 0.56.     

Measurement and correlation of liquid–liquid equilibria for acetonitrile + n-alkane systems

The reduction of sulfur content in gasoline and diesel fuel is a great environmental concern to reduce the motor vehicle emissions. Oxidative desulfurization using acetonitrile biphasic system has received much attention in recent years. The oxidative desulfurization can be oxidized the unreactive sulfur contents in the hydrodesulfurization and removed effectively. For the oxidative desulfurization process design and development, liquid–liquid equilibria (LLE) for acetonitrile biphasic systems are needed as fundamental information. In our previous work, LLE for acetonitrile + n-octane and + n-decane systems have been reported. In this work, therefore, LLE for acetonitrile + n-hexadecane system was measured. Furthermore, NRTL equation was applied to correlate the LLE for these three acetonitrile + n-alkane systems.     

First Ritter-type reaction of alkylbenzenes using N-hydroxyphthalimide as a key catalyst

The first Ritter-type reaction of alkylbenzenes with nitriles has been successfully achieved by the use of N-hydroxyphthalimide (NHPI) as a key catalyst. Thus, treatment of ethylbenzene with ammonium hexanitratocerate(IV) (CAN) in the presence of a catalytic amount of NHPI in EtCN under argon produced the corresponding amide in good selectivity.     

Interfacial properties of branch-tailed fluorinated surfactants yielding a water/supercritical CO2 microemulsion

We have examined the interfacial properties of several fluorinated surfactants in a water/CO2 mixture with a pendant drop tensiometer and revealed the relationships between the interfacial properties, the surfactant structure, and the microemulsifying power. We employed the following Aerosol-OT analogue surfactants that have two fluorinated tails: bis(1H,1H,5H-octafluoropentyl)-2-sulfosuccinate (di-HCF4), sodium bis(1H,1H,9H-hexadecafluorononyl)-2-sulfosuccinate (di-HCF8), sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), and sodium bis((1H,1H,2H,2H-heptadecafluorodecyl)-oxyethylene)-2-sulfosuccinate (8FS(EO)4). To discuss the effect of the fluorocarbon/hydrocarbon ratio in single surfactant molecules, water/CO2 interfacial tension (IFT) of a hybrid surfactant with one fluorocarbon and one hydrocarbon tail, that of a surfactant with a single fluorinated tail, and that of a hydrocarbon surfactant, Aerosol-OT (AOT), were examined. The hybrid surfactant employed was sodium 1-oxo-1-[4-(tridecafluorohexyl)phenyl]-2-hexanesulfonate (FC6-HC4), and the single-tailed surfactant was perfluoropolyether ammonium carboxylate (PFPECOONH4, CF3CF2(CF2OCF(CF3))4COONH4). All of the fluorinated AOT analogue surfactants exhibited an excellent level of activity at the water/CO2 interface compared with other fluorinated surfactants and AOT. With a larger hydrocarbon chain number in the CO2-philic tails (i.e., from 0 to 2), the IFT of the AOT analogue surfactants was increased. The area occupied by one surfactant molecule at the water/CO2 interface, A, and the critical microemulsion concentration, cmicroc, were determined and used to examine the water-to-surfactant molar ratio within a reversed micelle, W0c, of the surfactants. The surfactants that form W/scCO2 microemulsions with a large W0c were found to lower the interfacial tension efficiently irrespective of increases in temperature. To achieve the most desirable W0C, the surfactant needs not only a high CO2-philicity of the tails but also a high Krafft point, properties which induce a low hydrophilic/CO2-philic balance.     

A kinetic method for the determination of copper(II) by its catalytic effect on the oxidation of 3-methyl-2-benzothiazolinone hydrazone with hydrogen peroxide: a mechanistic study.

A catalytic spectrophotometric method for the determination of traces of copper(II) is proposed. 3-Methyl-2-benzothiazolinone hydrazone (MBTH) is oxidized by hydrogen peroxide to form a yellowish-brown compound. The reaction is accelerated by trace amounts of copper(II), and can be followed by measuring the increase in the absorbance at 390 nm. Since the absorbance at 40 min from the reaction start increases with an increase in the copper(II) concentration, the absorbance value is used as a parameter for copper(II) determination. Under the optimum experimental conditions (8.4 x 10(-3) mol dm(-3) MBTH, 0.7 mol dm(-3) hydrogen peroxide, pH 5.2, 35 degrees C), copper(II) can be determined in the range 0-50 microg dm(-3). The relative standard deviations are 6.9, 3.5, 2.7% for 2, 20 and 40 microg dm(-3), respectively. The detection limit of this method (3sigma) is 0.27 microg dm(-3). It was successfully applied to a determination of copper(II) in river water, tap water and ground-water samples. According to the results of a kinetic study, a mechanism is proposed which leads to the following rate equation: R0(cat) = kK1K2[MBTH][H2O2][Cu(II)]0/{(1 + K2[H2O2])[H+]}.     

Small-angle neutron-scattering study on a structure of microemulsion mixed with polymer networks

The structure of a microemulsion mixed with polymer networks was investigated by means of small-angle neutron scattering (SANS). The system consists of nonionic surfactant, polymer network, oil, and water. The microemulsion and the polymer network employed in this work are known to undergo temperature-induced structural transition and volume phase transition, respectively. Polymer solutions and gels were made by polymerizing monomer solutions in the presence of microemulsion droplets. In the case of a mixture of an N-isopropylacrylamide (NIPA) monomer solution and a microemulsion, the NIPA monomer was found to behave as a cosurfactant. However, polymerization resulted in a phase separation to polymer-rich and -poor phases. Interestingly, SANS results indicated that a well-developed ordered structure of oil domains was formed in polymer network and the structure was very different from its parent systems. Furthermore, the system underwent two different types of structural transitions with respect to temperature. One was originated from the structural transition of microemulsion due to the change of the spontaneous curvature and the other from the volume phase transition of the NIPA gel.     

Nanostructured liquid-crystalline Li-ion conductors with high oxidation resistance: molecular design strategy towards safe and high-voltage-operation Li-ion batteries

Nanostructured, uncharged liquid-crystalline (LC) electrolyte molecules having bicyclohexyl and cyclic carbonate moieties have been developed for application in Li-ion batteries as quasi-solid electrolytes, which suppress leakage and combustion. Towards the development of safe and high performance Li-ion batteries, we have designed Li-ion conductive LC materials with high oxidation resistance using density functional theory (DFT) calculation. The DFT calculation suggests that a mesogen with a bicyclohexyl moiety is suitable for the high-oxidation-resistance LC electrolytes compared to a mesogen containing phenylene moieties. A tri(oxyethylene) chain introduced between the cyclic carbonate and the bicyclohexyl moiety in the core part tunes the viscosity and the miscibility with Li salts. The designed Li-ion conductive LC molecules exhibit smectic LC phases over a wide temperature range, and they are miscible with added lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt up to 5 : 5 in molar ratio in their smectic phases. The resulting LC mixtures with LiTFSI show oxidation resistance above 4.0 V vs. Li/Li⁺ in cyclic voltammetry measurements. The enhanced oxidation resistance improves the performance of Li half-cells containing LC electrolytes.

Ion-conductive liquid-crystalline molecules with high-oxidation resistance, which were designed with density functional theory calculation, improved charge–discharge reactions in Li-ion batteries.     

Secondary ion mass spectrometry of sugar nucleotides

Secondary ion mass spectra of fifteen sugar nucleotide sodium salts were investigated. In the negative-ion mode. deprotonated free acid molecules, desodiated sodium salts and some structurally significant fragment ion swere obtained. The linked scan at constant B/E gave information on the characteristics of the sugar, nucleosides and base moieties in the sugar nucleotides.