Effect of polymer excipients on the enzyme activity of lyophilized bilirubin oxidase and beta-galactosidase formulations

The effects of excipients on the protein stability during lyophilization as well as the storage stability of lyophilized bilirubin oxidase (BO) and beta-galactosidase (GA) formulations were studied using four polymer excipients: dextran, polyvinylalcohol (PVA), poly(acrylic acid) (PAA), and alpha, beta-poly(N-hydroxyethyl)-L-aspartamide (PHEA). Denaturation of BO and GA during lyophilization largely depended on the excipient used. Dextran appeared to cause severe damage to proteins, whereas PHEA protected proteins effectively from denaturation. Storage stability of BO and GA formulations also depended on the excipients, such that the formulations containing dextran and PAA were relatively unstable. Storage stability was improved by absorption of a small amount of water for all the formulations studied. Absorption of a larger amount of water, however, decreased the storage stability of the formulations containing PVA, PAA or PHEA. In contrast, the storage stability of formulations containing dextran did not decrease noticeably with increasing water. This may be because formulations containing dextran have a higher glass transition temperature than formulations containing PVA, PAA or PHEA when a large amount of water is absorbed.     

A molecular dynamics simulation of a homogeneous organic-inorganic hybrid silica membrane

A new molecular dynamics simulation method was successfully applied to construct a homogeneous organic-inorganic hybrid silica membrane using the hybrid-pcff (h-pcff) potential function. Analysis suggested that the hybrid BTESE silica membrane provided a looser network and larger cavity size for the enhancement of gas permeability and selectivity.     

Peumusolide A, unprecedented NES non-antagonistic inhibitor for nuclear export of MEK

A new polyketide peumusolide A was disclosed as an unprecedented NES non-antagonistic inhibitor for nuclear export of MEK, a promising scaffold for antitumor agents with novel mechanism of action, from Peumus boldus Molina. The absolute stereostructure as well as optical purity was established by use of the two synthesized enantiomeric model lactones. In addition, the Δε values in their CD spectra were demonstrated to be the conclusive index for determination of not only configuration at C-3 but also optical purity of natural congeneric polyketides. Peumusolide A was revealed to show NES non-antagonistic action by the biotinylated probe and to inhibit proliferation of MEK-activated tumor cells selectively.     

A study on the role of gelatin in methacrylic-acid-based gel dosimeters

In radiotherapy treatment, polymer gel dosimetry can be used for verifying three-dimensional (3D) dose distributions. Gelatin is generally used as a gelling agent in the dosimeters. In this paper, another role of gelatin in a methacrylic-acid-based gel dosimeter (MAGAT) is investigated. Temperature increases due to exothermic polymerization in the irradiated gel are measured directly. Dose–R₂ responses are also obtained using MRI. It is shown that no appreciable increases in either temperature or R₂ are observed in MAGAT dosimeters made without gelatin, and that significant temperature and R₂ increases are observed when very low gelatin concentrations are used. These results indicate that gelatin is an important enabler for radiation-induced free-radical polymerization in methacrylic-acid-based gels. When gelatin is replaced by amino acids, changes in temperature are observed, along with small changes in R₂. The resulting dosimeter solutions remain transparent because the polymer does not precipitate as it does in regular MAGAT dosimeters containing gelatin. When the amino acids are replaced by acids without amino groups, no temperature or R₂ changes are observed, indicating that no polymer forms. These results show that amino groups (and possibly other functional groups) on the gelatin catalyze the radiation-induced free-radical polymerization that occurs in MAGAT dosimeters.     

Photoinduced omega-bond dissociation of m-halomethylbenzophenones studied by laser photolysis techniques and DFT calculations. Substituted position effects

Photochemical profiles of omega-cleavage of carbon-X (X = Br and Cl) bonds in m-bromo- and m-chloromethylbenzophenones (m-BMBP and m-CMBP) were investigated by laser photolysis techniques and DFT calculations. m-BMBP and m-CMBP were found to undergo omega-bond cleavage to yield the m-benzoylbenzyl radical (m-BBR) at 295 K, and the quantum yields were determined. No CIDEP signal was detected upon 308 nm laser photolysis of both the compounds. From these observations, it was inferred that the omega-bond of these m-halomethylbenzophenones (m-HMBP) cleaves in the lowest excited singlet state (S(1)(n,pi(*))) upon direct excitation. Upon triplet sensitization of acetone (Ac), the m-BBR formation was observed in transient absorption for an Ac-m-BMBP system, and an efficiency of the C-Br bond cleavage in the lowest triplet state (T(1)(n,pi(*))) of m-BMBP was determined. In contrast, formation of triplet m-CMBP was seen for an Ac-m-CMBP system. Absence of C-Cl bond cleavage in the triplet state of m-CMBP indicated the reactive state of m-CMBP for omega-cleavage is only the S(1)(n,pi(*)) state. Based on the efficiencies and DFT calculations for excited state energies, photoinduced omega-bond dissociation of m- and p-HMBPs was characterized.     

Synthesis and applications of novel fluorinated dendrimer-type copolymers by the use of fluoroalkanoyl peroxide as a key intermediate

Fluoroalkanoyl peroxide reacted with 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TTRV-Si) to afford fluoroalkyl end-capped oligomers containing some unreacted vinyl segments under very mild conditions. Fluoroalkyl end-capped cyclosiloxane oligomers containing some vinyl segments thus obtained reacted with N,N-dimethylacrylamide and fluoroalkanoyl peroxide to afford new fluorinated dendrimer-type block copolymers in good isolated yield. Similar reactions were also occurred by the use of 1,3,5-trivinyl-1,3,5-trimethylcyclotrisiloxane instead of TTRV-Si, and the corresponding fluorinated dendrimer-type block copolymer was obtained in good isolated yield. These fluorinated dendrimer-type block copolymers had an excellent solubility not only in water but also in traditional organic solvents including aliphatic fluorinated solvents. Interestingly, these fluorinated block copolymers were found to form the self-assembled dendrimer-type polymeric aggregates in aqueous solutions. More interestingly, these fluorinated block copolymers had an extremely higher dispersion ability of not only single-walled carbon nanotube and fullerenes but also magnetic nanoparticles into water, compared to that of the corresponding two fluoroalkyl end-capped oligomers.     

Antiferromagnetic or canted antiferromagnetic orderings of Fe(III) d spins of FeX4- ions in BEDT-TTFVO(S).FeX4 (X = Cl, Br) [BEDT-TTFVO(S) = bis(ethylenedithio)tetrathiafulvalenoquinone(-thioquinone)-1,3-dithiolemethide

By the reaction of new donor molecules, bis(ethylenedithio)tetrathiafulvalenoquinone(-thioquinone)-1,3-dithiolemethides [BEDT-TTFVO (1) and BEDT-TTFVS (2)] with FeX3 (X = Cl, Br) in CS2/CH3CN, 1:1 salts of 1 or 2 with an FeX4- ion (1.FeX4 and 2.FeX4) were obtained as black needle crystals. Their crystal structures are very similar to each other, in which the donor molecules are strongly dimerized and the dimers construct a one-dimensional uniform chain along the a axis, while the FeX4- ions are located at an open space surrounded by the neighboring donor molecules and also construct a one-dimensional uniform chain along the a axis. There are close contacts between the donor molecules and the FeX4- ions and significant differences in the contact distances among the four salts. All of the salts are semiconductors with room-temperature electrical conductivities of 10-4-10-2 S cm-1. The Fe(III) d spins of the FeX4- ions are subject to dominant ferromagnetic interaction through the participation of one of the singlet pi spins to form a short-range ferromagnetic d-spin chain. Such neighboring chains interact antiferromagnetically with each other through the singlet pi spins and are ordered at 1.0, 2.4, and 0.8 K for 1.FeCl4, 1.FeBr4, and 2.FeCl4, respectively. On the other hand, the antiferromagnetic ordering occurred with some canted angle at 1.9 K to leave a small magnetization for 2.FeBr4.     

Primary processes during the light-signal transduction of phototropin

Phototropin is a blue-light photoreceptor in plants that mediates phototropism, chloroplast relocation, stomata opening and leaf expansion. Phototropin molecule has two photoreceptive domains named LOV1 (light-oxygen-voltage) and LOV2 in the N-terminus and a serine/threonine kinase domain in the C-terminus, and acts as a blue light-regulated kinase. Each LOV domain binds a flavin mononucleotide as a chromophore and undergoes unique cyclic reactions upon blue-light absorption that comprises a cysteinyl-flavin adduct formation through a triplet-excited state and a successive adduct break to revert to the initial ground state. The molecular reactions underlying the photocycle are reviewed and one of the probable molecular schemes is presented. Adduct formation alters the secondary protein structure of the LOV domains. This structural change could be transferred to the linker between the kinase domain and involved in the photoregulation of the kinase activity. The structural changes as well as the oligomeric structures seem to differ between LOV1 and LOV2, which may explain the proposed roles of each domain in the photoregulation of the kinase activity. The photoregulation mechanism of phototropin kinase is reviewed and discussed in reference to the regulation mechanism of protein kinase A, which it resembles.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Regioselective Borylation of Porphyrins by C?H Bond Activation under Iridium Catalysis to Afford Useful Building Blocks for Porphyrin Assemblies

Highly regioselective and efficient borylation of a variety of porphyrins has been achieved by reaction with bis(pinacolato)diboron through C? H bond activation under iridium catalysis on the basis of the synthetic protocol developed by Miyaura, Hartwig, and Smith. A boryl group can be selectively introduced at sterically uncongested positions in the peripheral aryl groups of porphyrin substrates whose peripheral β‐positions are sterically hindered. Curiously, β substituents adjacent to the aryl group to be borylated have unexpectedly large effects on the regioselectivity, because the iridium catalyst can discriminate between subtle steric differences. Chemoselective borylation was also achieved for several functionalized porphyrins. This borylation protocol can be applied to various monomeric and oligomeric functional porphyrins, hence offering an efficient route to elaborate multiporphyrin‐based molecular constructs.