Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.     

Universal generation of higher-order multiringed Laguerre-Gaussian beams by using a spatial light modulator

Laguerre-Gaussian (LG) beams of various higher-order radial modes are generated by using a reflective phase-only liquid crystal on silicon (LCOS) spatial light modulator (SLM). Because of the LCOS SLM's phase-modulation characteristic of a wide spatial bandwidth, a phase modulation scheme effectively generates higher-order LG beams of up to the fifth-order radial mode. We also perform correlation analyses between the observed and the theoretical two-dimensional mode profiles to universally obtain correlation coefficients of more than 0.946, which suggest mode generations of high quality.     

A New Imaging Method with a Spatial Filter for Incoherent Stream

A new imaging method using an incoherent-type pupil filter: SFINCS (Spatial Filter for INCoherent Stream) is presented. The new filter divides the imaging beam into several incoherent beams at the pupil plane thereby enlarging the depth-of-focus (DOF). The capabilities of SFINCS are studied by simulations and several ways to realize the method are also discussed. The experimental results show that SFINCS has excellent DOF expanding capabilities for a point-image such as a hole pattern in VLSI lithography, and that 1.7 μm DOF is obtained with a 0.30 μm hole pattern by an i-line projection lens with 0.57 NA (numerical aperture).Presented at the International Commission for Optics Topical Meeting, Kyoto, 1994.     

Primal-dual proximal point algorithm for linearly constrained convex programming problems

A primal-dual version of the proximal point algorithm is developed for linearly constrained convex programming problems. The algorithm is an iterative method to find a saddle point of the Lagrangian of the problem. At each iteration of the algorithm, we compute an approximate saddle point of the Lagrangian function augmented by quadratic proximal terms of both primal and dual variables. Specifically, we first minimize the function with respect to the primal variables and then approximately maximize the resulting function of the dual variables. The merit of this approach exists in the fact that the latter function is differentiable and the maximization of this function is subject to no constraints. We discuss convergence properties of the algorithm and report some numerical results for network flow problems with separable quadratic costs.     

High-throughput characterization of local conductivity of Nd0.9Ca0.1Ba2Cu3O7−δ thin film by the low-temperature scanning microwave microscope

We developed a scanning microwave microscope (SμM) designed for high-throughput electric-property screening as well as for rapid construction of electronic phase diagrams at low temperatures. As a sensor probe, we used a high-Qλ/4 coaxial cavity resonator to which a thin needle with ball-tip end was attached. The sensor module was mounted on the low-temperature XYZ stage, which allowed us to map out the change of resonance frequency and quality factor due to the local tip-sample interaction at low temperatures. From the measurements of combinatorial thin films, such as Ti_1−xCo_xO_2−δ and Nd_0.9Ca_0.1Ba₂Cu₃O_7−δ (NCBCO), it was demonstrated that this SμM system has enough performance for the high-throughput characterization of sample conductance under variable temperature conditions.     

Nuclear Spin–Lattice Relaxation of Single Crystal Sr14Cu24O41

Nuclear spin–lattice relaxation rate T ₁ ⁻¹ has been measured for the ladder sites of two single crystals Sr₁₄Cu₂₄O₄₁ (Sr14-A,B) by ⁶³Cu NMR/NQR. The hole localization around 100 K appears as a peak in the T variation of T ₁ ⁻¹(NQR). On the other hand, it is suppressed in the T ₁ ⁻¹ (NMR) data under the magnetic field H ∼ 11 T, and a new peak appears around 20 K. T ₁ ⁻¹(NMR) around the peak is more enlarged for Sr14-B than for Sr14-A. Hence, holes on the ladders of Sr14-B tend to be more localized. This is considered to be an origin for the occurrence of the magnetic order in Sr14-B under H ∼ 11 T.     

M1 gamma strength for zirconium nuclei in the photoneutron channel

Photoneutron cross sections were measured for 91Zr, 92Zr, and 94Zr near the neutron separation energy with quasimonochromatic gamma rays. The data exhibit some extra components around the neutron threshold. A coherent analysis of the photoneutron data for 92Zr together with the neutron capture on 91Zr based on the microscopic Hartree-Fock-Bogoliubov plus quasiparticle random-phase approximation model for the E1 strength has revealed the presence of an M1 resonance at 9 MeV. The microscopic approach systematically shows the same M1 strength in the photoneutron cross section for 91Zr and 94Zr. The total M1 strength is about 75% larger than the strength predicted by the systematics, being qualitatively consistent with the giant M1 resonance observed in the inelastic proton scattering.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.     

Core-level photoemission of the Si(1 1 1)– -Ag surface using synchrotron radiation

The evolution of Si 2p core-level photoemission during a structural conversion from the Si (1 1 1)– -Ag to the Si(1 1 1)– -Ag superstructures induced by Ag adatoms adsorption at 140 K was studied using synchrotron radiation. The component from the top-layer Si-trimer atoms on the former surface was found to split into two components in the latter surface. The result is discussed in terms of a relaxation in some of the Si trimers induced by Ag adatoms sitting on the nearby Ag triangles of the -Ag substrate. The intensity ratio between the split components is a key to exclude some structure models proposed so far for the phases.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.