Two-dimensional hopping motion of encapsulated La atoms in silylated La(2)@C(80)

The (139)La NMR study of the exohedrally functionalized derivatives of La(2)@C(80) metallofullerene, La(2)@C(80)(Ar(2)Si)(2)CH(2) (: Ar = Mes, Mes = mesityl, : Ar = Dep, Dep = 2,6-diethylphenyl), reveal that the two La atoms hop between two sites along the equator of the C(80) cage.     

Inhibition of bubble coalescence: effects of salt concentration and speed of approach

Bubble coalescence experiments have been performed using a sliding bubble apparatus, in which mm-sized bubbles in an aqueous electrolyte solution without added surfactant rose toward an air meniscus at different speeds obtained by varying the inclination of a closed glass cylinder containing the liquid. The coalescence times of single bubbles contacting the meniscus were monitored using a high speed camera. Results clearly show that stability against coalescence of colliding air bubbles is influenced by both the salt concentration and the approach speed of the bubbles. Contrary to the widespread belief that bubbles in pure water are unstable, we demonstrate that bubbles formed in highly purified water and colliding with the meniscus at very slow approach speeds can survive for minutes or even hours. At higher speeds, bubbles in water only survive for a few seconds, and at still higher speeds they coalesce instantly. Addition of a simple electrolyte (KCl) removes the low-speed stability and shifts the transition between transient stability and instant coalescence to higher approach speeds. At high electrolyte concentration no bubbles were observed to coalesce instantly. These observations are consistent with recent results of Yaminsky et al. (Langmuir 26 (2010) 8061) and the transitions between different regions of behavior are in semi-quantitative agreement with Yaminsky's model.     

Synthesis of (-)-homogalanthamine from naltrexone

Acetylcholinesterase inhibitor (-)-homogalanthamine 3 was synthesized from μ opioid antagonist naltrexone (2) in 16% total yield. The synthesis features Grob fragmentation as a key reaction, which was especially accelerated in the presence of 15-crown-5.     

Induction of thermotropic bicontinuous cubic phases in liquid-crystalline ammonium and phosphonium salts

Two series of wedge-shaped onium salts, one ammonium and the other phosphonium, having 3,4,5-tris(alkyloxy)benzyl moieties, exhibit thermotropic bicontinuous "gyroid" cubic (Cub(bi)) and hexagonal columnar liquid-crystalline (LC) phases by nanosegregation between ionophilic and ionophobic parts. The alkyl chain lengths on the cationic moieties, anion species, and alkyl chain lengths on the benzyl moieties have crucial effects on their thermotropic phase behavior. For example, triethyl-[3,4,5-tris(dodecyloxy)benzyl]ammonium hexafluorophosphate forms the thermotropic Ia3d Cub(bi) LC phase, whereas an analogous compound with trifluoromethanesulfonate anion shows no LC properties. Synchrotron small-angle diffraction intensities from the Ia3d Cub(bi) LC materials provide electron density maps in the bulk state. The resulting maps show convincingly that the Ia3d Cub(bi) structure is composed of three-dimensionally interconnected ion nanochannel networks surrounded by aliphatic domains. A novel differential mapping technique has been applied successfully. The map of triethyl-[3,4,5-tris(decyloxy)benzyl]ammonium tetrafluoroborate has been subtracted from that of the analogous ammonium salt with hexafluorophosphate anion in the Ia3d Cub(bi) phases. The differential map shows that the counteranions are located in the core of the three-dimensionally interconnected nanochannel networks. Changing from trimethyl- via triethyl- to tripropylammonium cation changes the phase from columnar to Cub(bi) to no mesophase, respectively. This sensitivity to the widened shape for the narrow end of the molecule is explained successfully by the previously proposed semiquantitative geometric model based on the radial distribution of volume in wedge-shaped molecules. The LC onium salts dissolve lithium tetrafluoroborate without losing the Ia3d Cub(bi) LC phase. The Cub(bi) LC materials exhibit efficient ion-transporting behavior as a result of their 3D interconnected ion nanochannel networks. The Ia3d Cub(bi) LC material formed by triethyl-[3,4,5-tris(decyloxy)benzyl]phosphonium tetrafluoroborate shows ionic conductivities higher than the analogous Ia3d Cub(bi) material based on ammonium salts. The present study indicates great potential of Cub(bi) LC nanostructures consisting of ionic molecules for development of transportation nanochannel materials.     

Relaxation of the topological T1 process in a two-dimensional foam

The so-called topological T1 process, during which bubbles within a foam exchange neighbours is studied. The Durand and Stone model (Phys. Rev. Lett., 97, 226101 (2006)) describes the growth of a film that is newly created during the T1 process, and also the evolution of surfactant concentration on this newly created film. Here some characteristic features of the Durand and Stone model (not previously described by Durand and Stone) are elucidated. In particular it is shown that the surfactant concentration on the newly created film is predicted to undergo an extremely rapid initial evolution, which occurs long before the film itself approaches anywhere near its final equilibrium length. Associated with this, the predicted length of the newly created film tends to exhibit an extremely rapid acceleration early on in its growth. An intermediate asymptotic analysis is developed to explain the above model predictions, by focussing on the regime when the film is several times larger than its initial length, but still several times smaller than its final length. A physical explanation is offered for these predictions in terms of slippage between material points instantaneously at the end of the newly created film, and the evolving location of the film endpoint itself: this slippage implies surfactant being transferred onto the newly created film from neighbouring films, overwhelming the amount of surfactant initially present. The implications of these predictions for the likely observations in an experimental study of the T1 process are discussed.     

Binding thermodynamics of metal ions to HIV-1 ribonuclease H domain

Journal of Thermal Analysis and Calorimetry - Metal–protein interactions are not necessarily tight in many transient biological processes, such as cellular signaling, enzyme regulation, and...     

ChemInform Abstract: DFT Analysis of Cubane‐Type FeIr3S4 Clusters. Dinitrogen Binding and Activation at the Tetrahedral Fe Site.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Halogenated cladosporols produced by the sodium halide-supplemented fermentation of the plant-associated fungus Cladosporium sp. TMPU1621

A new cladosporol derivative, 2-chloro-cladosporol D (6), was isolated together with known cladosporol (1), cladosporols B–D (2–4), and cladosporol F (5) from the culture broth of plant-associated Cladosporium sp. TMPU1621. The structure of 6 was elucidated from spectroscopic analyses including NMR and MS data. The productivity of 6 increased in 3% NaCl-supplemented medium; therefore, fermentation of the producing fungus TMPU1621 with 3% NaBr was investigated, leading to the induced production of a new halogenated cladosporol, 2-bromo-cladosporol D (7). Compound 2 showed the lowest MIC values of 3.13 and 12.5?μg/mL against two MRSA strains, ATCC43300 and ATCC700698, respectively.     

Radical Polymerization of methacrylates with an adamantane‐like rigid core derived from naturally occurring myo‐inositol

Trimethacrylate and dimethacrylate with rigid adamantane‐like cores were synthesized from myo‐inositol orthoester, and their radical homopolymerization and copolymerization with methyl methacrylate (MMA) were investigated. The radical homopolymerization of trimethacrylate yielded a networked polymer with higher thermal stability than that of a networked polymer synthesized by radical homopolymerization of 1,3,5‐cyclohexanetriol‐derived trimethacrylate, demonstrating the effect of adamantane‐like core rigidity on the increase in thermal stability. Further, dimethacrylate underwent cyclopolymerization, forming a macrocyclic structure in the repeating unit, as the two methacrylate groups were oriented axially from the rigid orthoester‐core and thus located close to each other. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2411–2420     

Rigid triol and diol with adamantane‐like core derived from naturally occurring myo‐inositol and their polyaddition with diisocyanates

Two orthoester derivatives 1 and 2 that are easily accessible from naturally occurring myo‐inositol were exploited as new triol‐ and diol‐type monomers bearing a rigid adamantane‐like structure to polyaddition with diisocyanates that gave the corresponding networked and linear polyurethanes. DSC analysis of the networked polyurethanes revealed their high glass transition temperatures ranging from 155 to 248 °C, suggesting the contribution of the rigidity of the adamantane‐like structure introduced at the nodes of the networked polyurethanes 6. Besides, the polyaddition of 2 with diisocyanates gave the corresponding linear polyurethanes 4, of which glass transition temperatures were high, ranging from 105 to 177 °C, presumably by virtue of the rigidity of the adamantane‐like structure introduced into the main chains. T_gs of the networked polyurethanes 6 were higher than those of the linear polyurethanes 4. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3498–3505