Fine Pore-Structure Engineering by Ligand Conformational Control of Naphthalene Diimide-Based Semiconducting Porous Coordination Polymers for Efficient Chemiresistive Gas Sensing

Exploring new porous coordination polymers (PCPs) that have tunable structure and conductivity is attractive but remains challenging. Herein, fine pore structure engineering by ligand conformation control of naphthalene diimide (NDI)-based semiconducting PCPs with π stacking-dependent conductivity tunability is achieved. The π stacking distances and ligand conformation in these isoreticular PCPs were modulated by employing metal centers with different coordination geometries. As a result, three conjugated PCPs (Co−pyNDI, Ni−pyNDI, and Zn−pyNDI) with varying pore structure and conductivity were obtained. Their crystal structures were determined by three-dimensional electron diffraction. The through-space charge transfer and tunable pore structure in these PCPs result in modulated selectivity and sensitivity in gas sensing. Zn−pyNDI can serve as a room-temperature operable chemiresistive sensor selective to acetone.     

All-Solid-State Rechargeable Air Batteries Using Dihydroxybenzoquinone and Its Polymer as the Negative Electrode

A proof-of-concept study was conducted on an all-solid-state rechargeable air battery (SSAB) using redox-active 2,5-dihydroxy-1,4-benzoquinone (DHBQ) and its polymer (PDBM) and a proton-conductive polymer (Nafion). DHBQ functioned well in the redox reaction with the solid Nafion ionomer at 0.47 and 0.57 V vs. RHE, similar to that in acid aqueous solution. The resulting air battery exhibited an open circuit voltage of 0.80 V and a discharge capacity of 29.7 mAh g_DHBQ⁻¹ at a constant current density (1 mA cm⁻²). With PDBM, the discharge capacity was much higher, 176.1 mAh g_PDBM⁻¹, because of the improved utilization of the redox-active moieties. In the rate characteristics of the SSAB-PDBM, the coulombic efficiency was 84 % at 4 C, which decreased to 66 % at 101 C. In a charge/discharge cycle test, the capacity remaining after 30 cycles was 44 %, which was able to be significantly improved, to 78 %, by tuning the Nafion composition in the negative electrode.     

Tin(II)-Based Metal–Organic Frameworks Enabling Efficient,Selective Reduction of CO2 to Formate under Visible Light

Certain metal complexes are known as high-performance CO₂ reduction photocatalysts driven by visible light. However, most of them rely on rare, precious metals as principal components, and integrating the functions of light absorption and catalysis into a single molecular unit based on abundant metals remains a challenge. Metal-organic frameworks (MOFs), which can be regarded as intermediate compounds between molecules and inorganic solids, are potential platforms for the construction of a simple photocatalytic system composed only of Earth-abundant nontoxic elements. In this work, we report that a tin-based MOF enables the conversion of CO₂ into formic acid with a record high apparent quantum yield (9.8 % at 400 nm) and >99 % selectivity without the need for any additional photosensitizer or catalyst. This work highlights a new MOF with strong potential for photocatalytic CO₂ reduction driven by solar energy.     

Helical arrangement of a hydrogen‐bonded columnar liquid crystal induced by a centered triphenylene derivative bearing chiral side‐chains

A hydrogen‐bonded helical columnar liquid crystal was synthesized, in which the helical structure is induced by a centered triphenylene derivative bearing chiral side‐chains. The triphenylene derivative, 2,6,10‐tris(carboxymethoxy)‐3,7,11‐tris((S)‐(‐)‐2‐methyl‐1‐butanoxy)triphenylene ( TPC4(S) ), and a dendric amphiphile, 3,5‐bis‐(3,4‐bis‐dodecyloxy‐benzyloxy)‐N‐pyridine‐4‐yl‐benzamide ( DenC12 ), were mixed in a 1:3 ratio to obtain a complex, TPC4(S)‐DenC12 . Analyses by ¹H‐NMR spectroscopy, diffusion ordered spectroscopy (DOSY), CD spectroscopy, infrared (IR) spectroscopy, polarized optical microscopy (POM), differential scanning calorimetry (DSC), and X‐ray diffractometry revealed that TPC4(S)‐DenC12 self‐assembles to form helical columnar stacks in solution and a helical columnar liquid crystal in bulk. The hydrogen bonding between TPC4(S) and DenC12 is essential for the helical columnar organization, and the preference for a one‐handed helical conformation is likely derived from the steric interaction between the chiral side‐chains and the dendric amphiphiles in the packing of the hydrogen‐bonded columnar assemblies. Copyright © 2008 John Wiley & Sons, Ltd.     

Evaporation loss of dissolved volatile substances from ice surfaces

Volatile acidic solutes were used to make dilute solutions, which were frozen by various methods. The concentration of solutes and the pH of the samples were measured before and after being frozen. When the sample solution is frozen from the bottom to the top, solutes are concentrated into the unfrozen solution (i.e., the upper part of the sample) due to the freeze concentration effect. Thereafter, concentrated anions combine with protons to form acids, and the amount of acids in the unfrozen solution increase as the ice formation progresses. At the end of freezing, the acid is saturated at the ice surface, and if the formed acid is volatile, then evaporation occurs. Frozen solutions were allowed to stand below 0 degrees C, where evaporation rates were obtained in the following order: formate > acetate > propionate > n-butyrate > chloride > nitrate. Except for nitrate, evaporation rates were enough to take place in frozen water of the natural environment (e.g., ice crystal, graupel, snow crystal, and frozen droplets). The relationship between the evaporation rate of volatile acids and their physical properties demonstrate that the evaporation rates of weak acids are faster than those of strong acids, and the evaporation rates among weak acids are the same as the volatility of weak acids.     

Side-effect of ancillary ligand on electron transfer and photodynamics of a dinuclear valence tautomeric complex

A cobalt complex [[Co(dpqa)]2(dhbq)](PF6)3 ((PF6)3, dhbq = deprotonated 2,5-dihydroxy-1,4-benzoquinone, dpqa = di(2-pyridylmethyl)-N-(quinolin-2-ylmethyl)amine) was prepared and studied by X-ray diffraction, electrochemistry, ESR, thermally and photo-induced magnetic measurements; the results show that the ancillary ligand finely tuned structural factors as well as intermolecular interactions that affect the VT behavior.     

Estimates for Littlewood-Paley Functions and Extrapolation

We prove certain L ^p -estimates for Littlewood-Paley functions arising from rough kernels. The estimates are useful for extrapolation to prove L ^p -boundedness of the Littlewood-Paley functions under a sharp kernel condition.      

Total Synthesis of Taxol Enabled by Inter- and Intramolecular Radical Coupling Reactions

Taxol is a clinically used drug for the treatment of various types of cancers. Its 6/8/6/4-membered ring (ABCD-ring) system is substituted by eight oxygen functional groups and flanked by four acyl groups, including a β-amino acid side chain. Here we report a 34-step total synthesis of this unusually oxygenated and intricately fused structure. Inter- and intramolecular radical coupling reactions connected the A- and C-ring fragments and cyclized the B-ring, respectively. Functional groups of the A- and C-rings were then efficiently decorated by employing newly developed chemo-, regio-, and stereoselective reactions. Finally, construction of the D-ring and conjugation with the β-amino acid delivered taxol. The powerful coupling reactions and functional group manipulations implemented in the present synthesis provide new valuable information for designing multistep target-oriented syntheses of diverse bioactive natural products.     

Regio- and Z-Selective Alkyne Hydroamination and Hydrophenoxylation using Tetrafluoro-λ6-Sulfanyl Alkynes under Superbasic,Naked Anion Conditions

Alkyne hydroamination is an effective approach for the production of enamines and enamine-containing N-heterocycles. However, stereoselectivity control is a considerable challenge in this reaction because of the electronic repulsion between an incoming nitrogen lone pair and the alkyne π-system. Herein, we propose a methodology involving β-regio- and Z-selective alkyne hydroamination by using tetrafluoro-λ⁶-sulfanyl (SF₄) alkynes under superbasic, naked anion conditions. The reaction is compatible with a wide variety of N-heterocycles, including indoles, carbazoles, pyrazoles, and imidazoles, and selectively furnishes SF₄-linked Z-vinyl enamines with β-regioselectively. Moreover, the method can be extended to the β- and Z-controlled, base-mediated alkyne hydrophenoxylation with phenols to provide SF₄-linked Z-vinyl ethers in high yields. As the SF₄ unit has attracted attention as a bioisostere for alkynes, p-benzenes, bicyclo[1.1.1]pentyl (BCP) groups, and cubanes in medicinal chemistry, this chemistry represents an effective approach to creating novel drug candidates incorporating SF₄-containing molecules.     

Amplified Chirality Transfer to Aromatic Molecules through Non-specific Inclusion by Amorphous,Hyperbranched Poly(fluorenevinylene) Derivatives

Optically active, hyperbranched, poly(fluorene-2,4,7-triylethene-1,2-diyl) [poly(fluorenevinylene)] derivatives bearing a neomenthyl group and a pentyl group at the 9-position of the fluorene backbone at various ratios acted as a chirality donor (host polymers) efficiently included naphthalene, anthracene, pyrene, 9-phenylanthracene, and 9,10-diphenyanthracene as a chirality acceptor (guest molecules) in their interior space in film as well as in solution, with the guest molecules exhibiting intense circular dichroism through chirality transfer with chirality amplification. The efficiency of the chirality transfer was much higher with higher-molar-mass polymers than lower-molar-mass ones as well as with hyperbranched polymers compared to the analogous linear ones. The hyperbranched polymers include the small molecules in their complex structure without any specific interactions at various stoichiometries. The included molecules may have ordered intermolecular arrangement that may be somewhat similar to those of liquid crystals. Naphthalene, anthracene, and pyrene included in the polymer exhibited efficient circularly polarized luminescence, where the chirality was remarkably amplified in excited states, and anthracene exhibited especially high anisotropies in the emission on the order of 10⁻².