Synthesis,Characterization, and Antimicrobial Studies of Novel Benzodipyran Analog of Chloramphenicol

A synthesis, characterization, and antimicrobial study of a novel benzodipyran analog of chloramphenicol was carried out. Structure–antimicrobial activity relationship study indicates that benzodipyran analog of chloramphenicol was most active against Gram‐positive bacteria, Staphylococcus aureus, and the fungal strains Rhizoctonia bataticola and Penicillium even at minimum inhibitory concentration 10 µg/mL and showed moderate activity in other bacterial and fungal organisms. All the compounds synthesized during the present investigation were characterized by IR, ¹H NMR, ¹³C NMR, ESI‐MS, and elemental analysis.     

Effects of molecular siting and adsorbent heterogeneity on the ideality of adsorption equilibria

The ideal adsorbed solution (IAS) theory is the benchmark for the prediction of mixed-gas adsorption equilibria from pure-component isotherms. In this work, we use atomistic grand canonical Monte Carlo simulations to test the effects of molecular siting and adsorbent energetic heterogeneity on the applicability of the IAS theory. Pure-component isotherms generated by atomistic simulation are used to predict binary isobaric isotherms using the IAS theory. These predicted isotherms are compared with those obtained by a full atomistic simulation of the binary mixture. Binary mixtures of argon, methane, and CF4 in silicalite are found to obey IAS theory, while benzene/methane and cyclohexane/methane in silicalite are nonideal. The mixture of argon and CF4 is ideal despite the large difference in the sizes of the two species. This contradicts previous hypotheses in the literature, which state that mixtures of species of unequal size do not adsorb ideally. The nonideal behavior of the benzene/methane and cyclohexane/methane systems occurs because of adsorbent heterogeneity in these systems, which depends on both sorbent and sorbate. In addition, we use a lattice gas model with parameters derived from atomistic simulation to demonstrate analytically that a sufficiently energetically heterogeneous adsorbent will result in the breakdown of IAS theory even in the absence of interactions between sorbates.     

Nano‐emulsion use for the synthesis of polyaniline nano‐grains or nano‐fibers

We report that nano‐emulsions can be creatively used as a morphology selective synthesis method to prepare not only nano‐grains but also nano‐fibers with high selectivity. Synthesis of the two different morphological materials was demonstrated using polyaniline synthesis as a model case. Polyaniline nano‐grains were synthesized from aniline molecules in nano‐size aqueous droplets as polymerization sites whose droplets were generated by inverse water‐in‐oil nano‐emulsion use, and polyaniline nano‐fibers were synthesized from aniline in aqueous nano‐dimensional channels as polymerization sites whose channels were generated by direct oil‐in‐water nano‐emulsion use containing high population of oil droplets. Using the approaches, we successfully synthesized nano‐fibers of 60 nm diameter with 0.5 µm length and also nano‐grains having diameter of 60–80 nm. The two different polymerization sites of nano‐scale dimension were made by changing the ratio among surfactant, aqueous aniline/HCl solution, and oil, i.e. organic solvent. We found the nano‐fibers synthesized from the channels formed by the direct oil‐in‐water nano‐emulsion have higher bulk electrical conductivity than the nano‐grains which were synthesized from the droplets formed by the inverse water‐in‐oil emulsion. We also found that the emulsion use allows us to use a room temperature synthesis unlike conventional synthesis methods which require to use ice bath temperature. Physical properties of both nano‐fibers and nano‐grains synthesized were characterized by Fourier transform infrared (FTIR), UV–Vis spectra, scanning electron microscopy (SEM), and four probes conductivity measurement. Copyright © 2009 John Wiley & Sons, Ltd.     

Chlorination of 2-phenoxypropanoic acid with NCP in aqueous acetic acid: using a novel ortho-para relationship and the para/meta ratio of substituent effects for mechanism elucidation

Rate constants were measured for the oxidative chlorodehydrogenation of (R,S)-2-phenoxypropanoic acid and nine ortho-, ten para- and five meta-substituted derivatives using (R,S)-1-chloro-3-methyl-2,6-diphenylpiperidin-4-one (NCP) as chlorinating agent. The kinetics was run in 50% (v/v) aqueous acetic acid acidified with perchloric acid under pseudo-first-order conditions with respect to NCP at temperature intervals of 5 K between 298 and 318 K, except at the highest temperature for the meta derivatives. The dependence of rate constants on temperature was analyzed in terms of the isokinetic relationship (IKR). For the 20 reactions studied at five different temperatures, the isokinetic temperature was estimated to be 382 K, which suggests the preferential involvement of water molecules in the rate-determining step. The dependence of rate constants on meta and para substitution was analyzed using the tetralinear extension of the Hammett equation. The parameter lambda for the para/meta ratio of polar substituent effects was estimated to be 0.926, and its electrostatic modeling suggests the formation of an activated complex bearing an electric charge near the oxygen atom belonging to the phenoxy group. A new approach is introduced for examining the effect of ortho substituents on reaction rates. Using IKR-determined values of activation enthalpies for a set of nine pairs of substrates with a given substituent, a linear correlation is found between activation enthalpies of ortho and para derivatives. The correlation is interpreted in terms of the selectivity of the reactant toward para- or ortho-monosubstituted substrates, the slope of which being related to the ortho effect. This slope is thought to be approximated by the ratio of polar substituent effects from ortho and para positions in benzene derivatives. Using the electrostatic theory of through-space interactions and a dipole length of 0.153 nm, this ratio was calculated at various positions of a charged reaction center along the benzene C1-C4 axis, being about 2.5 near the ring and decreasing steeply with increasing distance until reaching a minimum value of -0.565 at 1.3 nm beyond the aromatic ring. Activation enthalpies and entropies were estimated for substrates bearing the isoselective substituent in either ortho and para positions, being demonstrated that they are much different from the values for the parent substrate. The electrophilic attack on the phenolic oxygen atom by the protonated chlorinating agent is proposed as the rate-determining step, this step being followed by the fast rearrangement of the intermediate thus formed, leading to products containing chlorine in the aromatic ring.     

Charge distribution study in the alpha-particle induced fission of232Th+ effect of excitation energy

The fractional cumulative yields of¹³⁵I,¹³⁸Xe and¹⁴⁰Ba in the particle (30 MeV) induced fission of²³²Th have been determined following the growth and decay of^135gXe,^138gCs and¹⁴⁰La, respectively, employing high resolution gamma ray spectroscopy. The fractional cumulative yield values are 0.766±0.02, 0.813±0.03 and 0.991±0.004, respectively. The analysis of the data indicates a broader width of charge distribution () compared to the normally observed =0.56±0.06 for thermal neutron fission of²³⁵U.     

Effect of Artabotrys odoratissimus extract as an environmentally sustainable inhibitor for mild steel corrosion in 0.5 M H2SO4 media

Artabotrys odoratissimus inhibitory effect on mild steel (MS) corrosion in 0.5 M H₂SO₄ solution has been assessed utilizing mass loss, electrochemical potentiodynamic polarization, and impedance spectroscopy techniques. The Artabotrys odoratissimus plant has a wide range of bioactive compounds. Phytochemicals were tested for ethanolic Artabotrys odoratissimus leaves extract (AOLE) using the FeCl₃ test, Salkowaski's test, and others. Corrosion tests were conducted at varying inhibitor concentrations and temperatures. The inhibitory impact of AOLE on corrosion of MS was reported to improve with increasing concentration. Polarization experiments revealed that AOLE is a mixed kind of inhibitor and the inhibition efficacy (η_w) for MS is 93.27% for 1.25 g/L AOLE. For Electrochemical impedance spectroscopy (EIS), maximal inhibitory efficacy (η_w) was 91.62% due to AOLE adsorption on the MS surface. The obtained results using each methodology are highly consistent and closely resemble each other. The adsorption of AOLE molecules on an MS surface from the bulk of the solution causes the inhibitor's inhibition action, and the adsorption mechanism follows Langmuir adsorption isotherm. The computed $\Delta G_{ads}^o$ values ranged between ?32.919 and ?33.520 kJ mol^?1, implying a spontaneous and exothermic inhibitory action. The thermodynamic and activation parameters are often used to understand corrosion inhibition mechanisms. The comparison of corrosion product and pure extract FT-IR spectrum indicates the nature of AOLE adsorption on the MS surface. The surface morphology of MS samples was assessed using atomic force microscopy (AFM), scanning electron microscope (SEM), and contact angle techniques.     

Hierarchical Modeling of Entangled Polymers

Summary : We demonstrate that it is possible to link multi-chain molecular dynamics simulations with the tube model using a single chain slip-links model as a bridge. This hierarchical approach allows significant speed up of simulations, permitting us to span the time scales relevant for a comparison with the tube theory. Fitting the mean-square displacement of individual monomers in molecular dynamics simulations with the slip-spring model, we show that it is possible to predict the stress relaxation. Then, we analyze the stress relaxation from slip-spring simulations in the framework of the tube theory. In the absence of constraint release, we establish that the relaxation modulus can be decomposed as the sum of contributions from fast and longitudinal Rouse modes, and tube survival. Finally, we discuss some open questions regarding possible future directions that could be profitable in rendering the tube model quantitative, even for mildly entangled polymers.     

Disposition Kinetics of Amitraz in Lactating Does

Amitraz, a member of the formamidine pesticide family, commonly used for ectoparasite control, is applied as a dip or low-pressure hand spray to cattle and swine, and the neck collar on dogs. Data on amitraz were generated mainly on laboratory animals, hens, dogs, and baboons. The data on the toxicity and disposition of amitraz in animals and its residues in the milk are inadequate. Therefore, the present study was intended to analyze the disposition kinetics of amitraz and its pattern of elimination in the milk of lactating does after a single dermal application at a concentration of 0.25%. Blood at predetermined time intervals and milk twice daily were collected for eight days post application. The drug concentration was assayed by high-performance liquid chromatography (HPLC). Amitraz was detected in whole blood as early as 0.5 h, which attained a peak concentration at 12 ± 5 h, followed by a steady decline; however, detection persisted until 168 h. Amitraz was present in the blood at its 50% C_max even after 48 h, and was still detectable after 7 days. The disposition after a single dermal application was best described non-compartmentally. The mean terminal half-life (t_1/2), mean residence time (MRT), and area under the curve (AUC_0–t) were 111 ± 31 h, 168 ± 39 h, and 539 ± 211 µg/mL/h, respectively. The apparent volume of distribution (Vd_area) was 92 ± 36 mL/g with an observed clearance (Cl) of 0.57 ± 0.33 mL/kg/h. Thus, the drug was well absorbed, widely distributed and slowly eliminated from the animal body. Amitraz achieved milk concentration approximating 0.2 per cent of the total dose after a single exposure and the steady-state elimination of amitraz in milk above the recommended maximum residue limit (MRL) of 0.01 mg/kg can act as a source of public health concern when applied on lactating animals.     

Brønsted acid catalyzed synthesis of 2-aryl-quinazolinones via cyclization of 2-aminobenzamide with benzonitriles in PEG

A simple and efficient Brønsted acid catalyzed synthesis of 2-aryl-quinazolinones via cyclization of 2-aminobenzamides with benzonitrile in PEG under metal and ligand-free condition. All substituted benzonitriles were also well participated with the formation of the corresponding products in moderate to good yields.     

Synthesis and molecular docking studies of novel 2-phenyl-4-{4-[(1-phenyl-1H-1,2,3-triazol-4-yl)methoxy]benzylidene}oxazol-5(4H)-one derivatives

Russian Journal of General Chemistry - 2-Phenyl-4-{4-[(1-phenyl-1H-1,2,3-triazol-4-yl)methoxy]benzylidene}oxazol-5(4H)-one derivatives were synthesized by click chemistry reactions. Exploration of...