Julia–Kocienski approach to trifluoromethyl-substituted alkenes

A Julia–Kocienski approach to trifluoromethyl-substituted alkenes was evaluated in the reactions of 1,3-benzothiazol-2-yl, 1-phenyl-1H-tetrazol-5-yl, and 1-tbutyl-1H-tetrazol-5-yl 2,2,2-trifluoroethyl sulfones with aldehydes. Among the various conditions tested, the best yields were obtained with 1-phenyl-1H-tetrazol-5-yl 2,2,2-trifluoroethyl sulfone, in CsF-mediated, room temperature olefinations in DMSO. Aromatic aldehydes gave (trifluoromethyl)vinyl derivatives in 23–86% yields, with generally moderate stereoselectivity. Straightforward synthesis of the Julia–Kocienski reagent, and conversion to trifluoromethyl-substituted alkenes under mild reaction conditions, are the advantages of this approach.     

Rare examples of fluoride-based multiferroic materials in Mn-substituted BaMgF4 systems: experimental and theoretical studies

A series of Mn-substituted BaMgF(4) samples have been synthesized by a hydrothermal route. X-ray diffraction study reveals that the products are monophasic in nature. Scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS) studies were carried out to investigate the morphology and stoichiometry for these compounds. X-ray photoelectron spectroscoy (XPS) and electron spin resonance (ESR) studies were done to confirm the oxidation state of dopant ion. Room temperature ferromagnetism was observed on Mn substitution at the Mg site in BaMgF(4) samples. The saturation magnetization increases initially, shows a peaking effect, and then decreases with further increase in Mn concentration in BaMg(1-x)Mn(x)F(4) (0.0 ≤ x ≤ 0.15). However, ferroelectricity was found to decrease with an increase in Mn concentration in the series of investigated BaMg(1-x)Mn(x)F(4) (0.0 ≤ x ≤ 0.15) samples. First-principle calculations, using the projector augmented wave potentials on Mn-substituted BaMgF(4), confirmed the decrease in magnetic moment with an increase in Mn content beyond certain concentration. These samples exhibit very weak magnetocapacitive coupling, which can be attributed to the very small magnetic signal observed in these samples.     

Titanocene(III) chloride mediated radical induced asymmetric synthesis of α-methylene bis-γ-butyrolactone

Asymmetric synthesis of α-methylene bis-γ-butyrolactone has been synthesized using titanocene(III) chloride as a radical source. Titanocene(III) chloride (Cp₂TiCl) was prepared in situ from commercially available titanocene dichloride (Cp₂TiCl₂) and zinc dust in THF.     

Syntheses, crystal structures and magnetic properties of two dicopper(II) complexes and a zigzag 1-D Cu(II) complex of a bidentate pyridyl-pyrazole ligand

Two new dinuclear copper compounds, [Cu₂(pypz)₂(N₃)₂(NO₃)₂] (1) and [Cu₂(pypz)₂(OH)₂(NO₃)₂] (2), and one 1-D polymeric Cu(II) complex, [Cu(pypz)(dca)₃]_n (3) [‘pypz’ = (3,5dimethyl-1-(2′-pyridyl)pyrazole) and dca = (dicyanamide)], have been synthesized and characterized crystallographically and spectroscopically. Complex 1 is pseudo-octahedral, adjacent Cu atoms are connected by a pair of μ(1,1) azido groups and the structure is stabilized by π-π interactions between two pyridyl moieties from two different neighboring complex molecules. Complexes 2 and 3 are square pyramidal. The hydroxo bridged complex 2 is further stabilized through H-bonding. The 1-D polymeric chain of 3 is bridged by an end-to-end dicyanamide bridge and it propagates along the crystallographic b axis, whilst the polymer chains are stacked one upon another along the crystallographic c axis. Low temperature magnetic measurement shows that complexes 1 and 2 are ferromagnetic (J values are 30.81 and 14.79 cm⁻¹, respectively), whereas due to larger Cu-Cu distances, complex 3 shows weak ferromagnetism.     

Kinetics and mechanism of interaction of hexaaquachromium(III) with <Emphasis Type="SmallCaps">l</Emphasis>-Dopa in aqueous medium: comparative antiparkinsonian studies

The kinetics and mechanism of the substitution reaction between [Cr(H₂O)₆]³⁺ and l-Dopa in aqueous medium has been studied over the range 1.8 ≤ pH ≤ 2.6, 1.68 × 10⁻² mol dm⁻³ ≤ [Dopa] ≤ 5.04 × 10⁻² mol dm⁻³, I = 0.1 mol dm⁻³ (KNO₃) at 50 °C. The reaction takes place via an outer sphere association between Cr³⁺ and l-Dopa followed by chelation. The product was characterized by physicochemical and infrared spectroscopic methods. The antiparkinsonian activity of the product was found to be higher than that of l-Dopa.     

Organogel-hydrogel transformation by simple removal or inclusion of N-Boc-protection

Development of organo- and hydrogelators is on the rise because of their extensive applications, from advanced materials to biomedicine. However, designing both types of gelator from a common structural scaffold is challenging, and becomes more significant if transformation between them can be achieved by a simple method. The present work reports the design and synthesis of both organo- and hydrogelators from amino acid/peptide-based amphiphilic precursors with a naphthyl group at the N terminus and a primary amine-containing hydrophilic ethyleneoxy unit at the C terminus. In alkaline medium, tert-butyloxycarbonyl (Boc) protection at the primary amine of the amphiphiles resulted in efficient organogelators (minimum-gelation concentration (MGC)=0.075-1.5% w/v). Interestingly, removal of the Boc protection from the ethyleneoxy unit, under acidic conditions, yielded amphiphiles capable of gelating water (MGC=0.9-3.0% w/v). Simple protection and deprotection chemistry was used to achieve transformation between the organogel and hydrogel by alteration of the pH. Combinations of different aliphatic and aromatic amino acids were investigated to discover their cumulative effect on the gelation properties. Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were employed to investigate the supramolecular morphology of the thermoreversible gels. Spectroscopic investigations (FTIR, photoluminescence, XRD) revealed that noncovalent interactions, such as hydrogen bonding, π-π stacking, and van der Waals interactions play a decisive role in self-assembled gelation.     

Total chemical synthesis of biologically active vascular endothelial growth factor

Efficient access: the 204-residue covalent-dimer vascular endothelial growth factor with full mitogenic activity was prepared from three unprotected peptide segments by one-pot native chemical ligations. The covalent structure of the synthetic VEGF was confirmed by precise mass measurement, and the three-dimensional structure of the synthetic protein was determined by high-resolution X-ray crystallography.     

The association reaction between C2H and 1-butyne: a computational chemical kinetics study

The potential energy surfaces (PES) for the reaction of the C(2)H radical with 1-butyne (C(4)H(6)) have been studied using the CBS-QB3 method. Density functional B3LYP/cc-pVTZ and M06-2X/6-311++G(d,p) calculations have also been performed to analyze the reaction energetics. For detailed theoretical calculation on the total reaction mechanism, the initial association reactions on more and less substituted C atoms of 1-butyne are treated separately followed by a variational transition state theory (VTST) calculation to obtain reaction rates. The successive unimolecular reactions from the association reaction complexes are subjected to Rice-Ramsperger-Kassel-Marcus (RRKM) calculations for reaction rate constants and product branching ratios. The calculated rate constants in the temperature range 70-295 K for both the association reactions are found to be highly temperature dependent at low temperatures, which is contrary to the experimental findings of temperature independent association rates. We have explained this observation with the help of variational nature of the transition states, and we found a "loose" transition state at low temperatures. The calculated product branching ratios for the unimolecular reactions generally agree with the available experimental data, although some channels show a significant method dependency and therefore the correlation with experiment is lost to some extent. Our detailed reaction energetics calculations confirm that the C(2)H + C(4)H(6) reaction proceeds without an entrance barrier and leads to the important products ethynylallene + CH(3), 1,3-hexadiyne + H, 3,4-hexadiene-1-yne + H, 2-ethynyl-1,3-butadiene + H, 3,4-dimethylenecyclobut-1-ene + H and fulvene + H exothermic by 25-75 kcal mol(-1), with strong dependence of the product distribution on the association mode of C(2)H with C(4)H(6), making these reactions fast under low temperature conditions of Titan's atmosphere. Therefore this study can provide a detailed picture of the complex hydrocarbon formation mechanism in the upper atmosphere.