Polymerization of Methyl Methacrylate: Kinetics of the Reaction Initiated by the Mn(III)-1,2-Propanediol Redox System

Kinetics of polymerization of methyl methacrylate initiated by Mn³⁺/1,2-propanedlol has been investigated in aqueous sulfuric acid at the temperature range of 25–35°C. The rate of polymerization (R_p) and the rate of manganic ion disappearance (-R_Mn) have been computed. The effects of organic solvents, certain cationic and anionic detergents, added electrolytes on the initial rate of polymerization, and maximum conversion have been examined. Depending on the kinetic results, a reaction scheme has been suggested involving the formation of a complex between Mn³⁺ and the alcohol, which subsequently decomposed in an unimolecular step to generate the initiating free-radical which initiates polymerization and termination of the growing polymer chain by metal ion.     

Effect of gamma irradiation on the thermal decomposition of zinc bromate by dynamic thermogravimetry

The thermal decoposition of -irradiated zinc bromate has been studied by dynamic thermogravimetry. The reaction order, activation energy, frequency factor and entropy of activation were computed using the Coats-Redfern, Freeman-Carroll and Horowitz-Metzger methods and were compared with those of the unirradiated salt. Irradiation enhances the decomposition and the effect increases with the irradiation dose. The activation energy decreases on irradiation. The mechanism for the decomposition of unirradiated and irradiated zinc bromate follows the Avrami model equation, 1-(1-)^1/3=kt, and the rate-controlling process is a phase boundary reaction assuming spherical symmetry.     

Assembly of the hexameric Escherichia coli arginine repressor investigated by nano-electrospray ionization time-of-flight mass spectrometry

The arginine repressor (ArgR) from Escherichia coli regulates genes for L-arginine metabolism and is a required recombination factor for colE1 plasmid replication. Both functions require binding of L-arginine to the protein. In this work, nano-electrospray ionization time-of-flight mass spectrometry (nano-ESI-TOFMS) is used to study conformational and oligomeric states of intact ArgR and its isolated structural domains. In agreement with X-ray diffraction studies, it is shown that ArgR oligomerizes to form hexamers in both the presence and absence of L-arginine, and the basic unit of oligomerization appears to be the trimer. Higher-order assembly into dodecamers is also detected. The isolated C-terminal domain is found to associate into trimers and hexamers whereas the N-terminal domain is detected in its monomeric form. The observed species distributions suggest a role for the N-terminal domain in hexamer stabilization.     

Unprecedented control over polymerization of n-hexyl isocyanate using an anionic initiator having synchronized function of chain-end protection

The living anionic polymerization of isocyanates carried out using conventional initiators is associated with side reactions due to rapid initiation rates as well as back-biting by the growing chain, resulting in a lack of control on the molecular weight (MW) and molecular weight distribution (MWD) of the polymers. Successful control over the reaction was possible by using additives that could prevent back-biting. We find an initiator in sodium benzanilide (Na-BA), which has a slow initiation rate combined with additive function, so that use of an external additive is eliminated. The initiator has resulted in polymers with high yields and an unprecedented control over the MW and MWD. It is possible to introduce a number of functionalities at the termini of the polymer by using Na-BA derivatives as well as suitable terminating agents, leading to macromonomer, reactive and chiral polymers, and chiral macromonomer in approximately 100% yields. In the process, the finding has expanded the scope of polyisocyanates in diverse applications.     

Synthesis of poly(butyl acrylate)/sodium silicate nanocomposite fire retardant

Poly(butyl acrylate) (PBA)/sodium silicate (SS) nanocomposites were prepared via emulsifier-free emulsion technique in presence of Cu(II)/glycine chelate complex and ammonium persulfate (APS) initiator. The strongly hydrophobic PBA was intercalated into the hydrophilic SS layer. Since the interlayers of silicate were filled with sodium cations, the hydrophilic properties were enhanced and lead to high degree of swelling. The formation of the PBA/SS nanocomposite was confirmed by infrared spectra (IR). Furthermore, as evidenced by transmission electron microscopy (TEM), the composite so obtained was found to have nanoscale structure. X-ray diffraction (XRD) was used to characterize the nanoscale dispersion of the layer silicate and useful for measurement of d-spacing in interlayer system. It was found from thermogravimetric analysis that PBA/SS nanocomposites had more thermal stability as compared to raw PBA due to intercalation. Burning test of the nanocomposites performance exhibited a flame retardant property, which was also verified from cone calorimeter analysis. For its commercialization, the ecological friendly nature was studied via biodegradation and was found to have better biodegradability than the raw PBA.     

Novel soluble thermally stable silane-containing aromatic polyimides with reduced dielectric constant

Bis(p-aminophenoxy)diphenylsilane (BPS), bis(m-aminophenoxy)diphenylsilane (BMS) and bis(5-amino-1-naphthoxy)diphenylsilane (BAS) as three silane-diamines were prepared by the reactions of 4-aminophenol, 3-aminophenol, and 5-amino-1-naphthol respectively, with dichlorodiphenylsilane in the presence of triethylamine. The related silane-containing polyimides were prepared by two-step polycondensation reactions of these diamines with three different aromatic dianhydrides. All the polymers were characterized and their physical and thermal properties were studied. The polymers showed high thermal stability while their solubility was greatly increased in polar aprotic solvents. Wide angle X-ray diffraction showed that all the polyimides were almost amorphous. Also their dielectric constants were decreased due to the incorporation of softening and low-polarizing siloxane units into the polymer backbone.     

Polymeric Nanoformulation of Zoledronic Acid Rescues Osteoblasts from the Harmful Effect of its Native Form: An In Vitro Investigation of Cytotoxic Potential on Osteoblasts and Osteosarcoma Cells

Osteosarcoma (OS) is a malignant tumor, fatal for pediatric patients who do not respond to chemotherapy, alternative therapies and drugs can provide better outcomes. Zoledronic acid (Zol) belonging to the class of bisphosphonates (BPs) has a direct antitumor ability to prevent Ras GTPases modification and stimulate apoptosis. Despite advances in maintaining balance in skeletal events and direct anticancer properties, Zol causes cytotoxicity to normal healthy pre-osteoblast cells, hampering mineralization and differentiation. The study reports the preparation and evaluation of a nanoformulation that can diminish the existing drawbacks of native Zol. The cytotoxic effect is evaluated on bone cancer cells and healthy bone cells with three different cell lines namely, K7M2 (mouse OS cell line), SaOS2 (human OS cell line), and MC3T3E1 (healthy cell counterpart). It is observed that Zol nanoformulation is uptaken more (95%) in K7M2 whereas in MC3T3E1, the percent population internalizing nanoparticles (NPs) is 45%. Zol has a sustained release of 15% after 96 h from the NP which leads to a rescuing effect on the normal pre-osteoblast cells. In conclusion, it can be stated that Zol nanoformulation can be used as a good platform for a sustained release system with minimum side effects to normal bone cells.     

Synthesis of poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) amphiphilic coil‐rod block copolymer by anionic polymerization

A well‐defined amphiphilic coil‐rod block copolymer, poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) (P2VP‐b‐PHIC), was synthesized with quantitative yields by anionic polymerization. A low reactive one‐directional initiator, potassium diphenyl methane (DPM‐K), was very effective in polymerizing 2‐vinyl pyridine (2VP) without side reactions, leading to perfect control over molecular weight and molecular weight distribution over a broad range of initiator and monomer concentration. Copolymerization of 2VP with n‐hexyl isocyanate (HIC) was carried out in the presence of sodium tetraphenyl borate (NaBPh₄) to prevent backbiting reactions during isocyanate polymerization. Terminating the living end with a suitable end‐capping agent resulted in a P2VP‐b‐PHIC coil‐rod block copolymer with controlled molecular weight and narrow molecular weight distribution. Cast film from a chloroform solution of P2VP‐b‐PHIC displayed microphase separation, characteristic of coil‐rod block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 607–615, 2005     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.