Impact of homogeneous and filamentary discharge modes on the efficiency of dielectric barrier discharge ionization mass spectrometry

The present study contributes to the evaluation of dielectric barrier discharge-based ambient ionization for mass spectrometric analysis (DBDI-MS) by providing a further step towards an understanding of underlying ionization processes. This examination highlights the effect of physical discharge modes on the ionization efficiency of the DBDI source. A distinction is made between the homogeneous and filamentary discharge mode due to different plasma gases in barrier configurations. Therefore, we first report on discharge modes of DBDI by demonstrating a universally applicable method to classify the predominant modes. Then, the ionization efficiency of these two modes is evaluated by a laser desorption-DBDI-MS with different molecular analytes. Here, the laser desorption is used to deliver neutral analytes which will be ionized by the plasma jet applied as dielectric barrier discharge ionization. With a clear increase of signal intensities in the homogeneous mode in contrast to the filamentary one, the present study indicates a pronounced dependence of the ionization efficiency on the discharge mode allowing further insight into the mechanisms of the ionization process.

Chiral Chalcogenyl-Substituted Naphthyl- and Acenaphthyl-Silanes and Their Cations

Cyclic silylated chalconium borates 13 [B(C₆F₅)₄] and 14 [B(C₆F₅)₄] with peri-acenaphthyl and peri-naphthyl skeletons were synthesized from unsymmetrically substituted silanes 3 , 4 , 6 , 7 , 9 and 10 using the standard Corey protocol (Chalcogen Ch=O, S, Se, Te). The configuration at the chalcogen atom is trigonal pyramidal for Ch=S, Se, Te, leading to the formation of cis- and trans-isomers in the case of phenylmethylsilyl cations. With the bulkier tert-butyl group at silicon, the configuration at the chalcogen atoms is predetermined to give almost exclusively the trans-configurated cyclic silylchalconium ions. The barriers for the inversion of the configuration at the sulfur atoms of sulfonium ions 13 c and 14 a are substantial (72–74 kJ mol⁻¹) as shown by variable temperature NMR spectroscopy. The neighboring group effect of the thiophenyl substituent is sufficiently strong to preserve chiral information at the silicon atom at low temperatures.     

A bronze matryoshka: the discrete intermetalloid cluster [Sn@Cu12@Sn20](12-) in the ternary phases A12Cu12Sn21 (A = Na, K)

The synthesis and crystal structure of the first ternary A-Cu-Sn intermetallic phases for the heavier alkali metals A = Na to Cs is reported. The title compounds A(12)Cu(12)Sn(21) show discrete 33-atom intermetalloid Cu-Sn clusters {Sn@Cu(12)@Sn(20)}, which are composed of {Sn(20)} pentagonal dodecahedra surrounding {Cu(12)} icosahedra with single Sn atoms at the center. Na(12)Cu(12)Sn(21) and K(12)Cu(12)Sn(21) were characterized by single-crystal XRD studies, and the successful synthesis of analogous A-Cu-Sn compounds with A = Rb and Cs is deduced from powder XRD data. The isotypic A(12)Cu(12)Sn(21) phases crystallize in the cubic space group Pn ?3m (No. 224), with the Cu-Sn clusters adopting a face centered cubic arrangement. A formal charge of 12- can be assigned to the {Sn@Cu(12)@Sn(20)} cluster unit, and the interpretation of the title compounds as salt-like intermetallic phases featuring discrete anionic intermetalloid [Sn@Cu(12)@Sn(20)](12-) clusters separated by alkali metal cations is supported by electronic structure calculations. For both Na(12)Cu(12)Sn(21) and K(12)Cu(12)Sn(21), DFT band structure calculations (TB-LMTO-ASA) reveal a band gap. The discrete [Sn@Cu(12)@Sn(20)](12-) cluster is analyzed in consideration of the molecular orbitals obtained from hybrid DFT calculations (Gaussian 09) for the cluster anion. The [Sn@Cu(12)@Sn(20)](12-) cluster MOs can be classified with labels indicating the numbers of radial and angular nodes, in the style of spherical shell models of cluster bonding.     

Total Synthesis and Biological Evaluation of the Cytotoxic Resin Glycosides Ipomoeassin A–F and Analogues

A multitasking C‐silylation strategy using the readily available compound 26 as a surrogate for cinnamic acid represents the key design element of a total synthesis of all known members of the ipomoeassin family of resin glyosides. This protecting group maneuver allows the unsaturated acids decorating the glucose subunit of the targets to be attached at an early phase of the synthesis, prevents their participation in the ruthenium‐catalyzed ring‐closing metathesis (RCM) used to form the macrocyclic ring, and protects them against reduction during the hydrogenation of the resulting cycloalkene over Wilkinson’s catalyst. As the C‐silyl group can be concomitantly removed with the O‐TBS substituent using tris(dimethylamino)sulfonium difluorotrimethylsilicate (TASF) in acetonitrile, no separate protecting group manipulations were necessary in the final stages, thus contributing to a favorable overall “economy of steps”. In addition to the naturally occurring ipomoeassins, a small set of synthetic analogues has also been prepared by “diverted total synthesis”. The cytotoxicity of these compounds was assayed with two different cancer cell lines. The recorded data confirm previous findings that the acylation‐ and oxygenation pattern of these amphiphilic glycoconjugates is highly correlated with their biological activity profile. Ipomoeassin F turned out to be the most promising member of the series, showing IC₅₀ values in the low nanomolar range.     

Synthesis of rhamnosylated diosgenyl glucosides as mimetics of cytostatic steroidal saponins from Ornithogalum saindersiae and Galtonia candicans

The synthesis of mimetic of the steroid saponins 1 and 2 was investigated. As a substitute for the complex 22-homo-23-nor-steroid moieties A and B in 1 and 2 diosgenin was introduced. The silyl protected thioorthoester 20 was successfully employed for glucosylation. After selective 2--deacetylation, the glucosylated diosgenyl acceptor 23 was rhamnosylated. The 4---methoxybenzoylated donor 12 gave only minor yields. By using the tri--benzoyl protected donor 15 the [small alpha]--rhamnopyranosyl-(1[rightward arrow]2)-[small beta]--glucopyranosyl-(1[rightward arrow]3[small beta])-diosgenin derivative 25 was obtained.     

Non-Heme-Iron-Mediated Selective Halogenation of Unactivated Carbon−Hydrogen Bonds

Oxidation of the iron(II) precursor [(L¹)Fe^IICl₂], where L¹ is a tetradentate bispidine, with soluble iodosylbenzene (^sPhIO) leads to the extremely reactive ferryl oxidant [(L¹)(Cl)Fe^IV=O]⁺ with a cis disposition of the chlorido and oxido coligands, as observed in non-heme halogenase enzymes. Experimental data indicate that, with cyclohexane as substrate, there is selective formation of chlorocyclohexane, the halogenation being initiated by C−H abstraction and the result of a rebound of the ensuing radical to an iron-bound Cl⁻. The time-resolved formation of the halogenation product indicates that this primarily results from ^sPhIO oxidation of an initially formed oxido-bridged diiron(III) resting state. The high yield of up to >70 % (stoichiometric reaction) as well as the differing reactivities of free Fe²⁺ and Fe³⁺ in comparison with [(L¹)Fe^IICl₂] indicate a high complex stability of the bispidine-iron complexes. DFT analysis shows that, due to a large driving force and small triplet-quintet gap, [(L¹)(Cl)Fe^IV=O]⁺ is the most reactive small-molecule halogenase model, that the Fe^III/radical rebound intermediate has a relatively long lifetime (as supported by experimentally observed cage escape), and that this intermediate has, as observed experimentally, a lower energy barrier to the halogenation than the hydroxylation product; this is shown to primarily be due to steric effects.     

Pathways of the Extremely Reactive Iron(IV)-oxido complexes with Tetradentate Bispidine Ligands

The nonheme iron(IV)-oxido complex trans-N3-[(L¹)Fe^IV=O(Cl)]⁺, where L¹ is a derivative of the tetradentate bispidine 2,4-di(pyridine-2-yl)-3,7-diazabicyclo[3.3.1]nonane-1-one, is known to have an S=1 electronic ground state and to be an extremely reactive oxidant for oxygen atom transfer (OAT) and hydrogen atom abstraction (HAA) processes. Here we show that, in spite of this ferryl oxidant having the “wrong” spin ground state, it is the most reactive nonheme iron model system known so far and of a similar order of reactivity as nonheme iron enzymes (C−H abstraction of cyclohexane, −90 °C (propionitrile), t_1/2=3.5 sec). Discussed are spectroscopic and kinetic data, supported by a DFT-based theoretical analysis, which indicate that substrate oxidation is significantly faster than self-decay processes due to an intramolecular demethylation pathway and formation of an oxido-bridged diiron(III) intermediate. It is also shown that the iron(III)-chlorido-hydroxido/cyclohexyl radical intermediate, resulting from C−H abstraction, selectively produces chlorocyclohexane in a rebound process. However, the life-time of the intermediate is so long that other reaction channels (known as cage escape) become important, and much of the C−H abstraction therefore is unproductive. In bulk reactions at ambient temperature and at longer time scales, there is formation of significant amounts of oxidation product – selectively of chlorocyclohexane – and it is shown that this originates from oxidation of the oxido-bridged diiron(III) resting state.     

3D DNA Origami Nanoparticles: From Basic Design Principles to Emerging Applications in Soft Matter and (Bio‐)Nanosciences

Scaffold‐based lattice‐engineered 3D DNA origami is a powerful and versatile technique for the rational design and build‐up of arbitrarily structured and monodisperse DNA‐based 3D nanoobjects. Relying on the unsurpassed molecular programmability of sequence‐specific DNA hybridization, a long DNA single strand (termed scaffold) is assembled with many short single‐stranded oligomers (termed staples), which organize the scaffold into a 3D lattice in a single step, thereby leading to 3D nanoparticulate structures of the highest precision in high yields. Applications of 3D DNA origami are increasingly wide‐spread and interface with numerous fields of sciences, for example, anisometric or anisotropically functionalized nanoparticles, fundamental investigations of superstructure formation, biomedicine, (bio)physics, sensors, and optical materials. This Minireview discusses the fundamentals and recent advances from structure formation to selected applications, with a mission to promote cross‐disciplinary exchange.     

Cobalt‐Bridged Ionic Liquid Polymer on a Carbon Nanotube for Enhanced Oxygen Evolution Reaction Activity

By taking inspiration from the catalytic properties of single‐site catalysts and the enhancement of performance through ionic liquids on metal catalysts, we exploited a scalable way to place single cobalt ions on a carbon‐nanotube surface bridged by polymerized ionic liquid. Single dispersed cobalt ions coordinated by ionic liquid are used as heterogeneous catalysts for the oxygen evolution reaction (OER). Performance data reveals high activity and stable operation without chemical instability.