Kinetic studies of nonaqueous polymerization of methyl methacrylate initiated by ferric laurate–n-hexyl amine system

The polymerization of methyl methacrylate was studied in carbon tetrachloride medium with ferric laurate, a metal soap, in combination with n-hexyl amine as the initiator system at 60°C. The rate of polymerization was found to be linear with the monomer concentration and proportional to the square root of both ferric ion and amine concentration. A reaction scheme involving initial complex formation between ferric ion and amine and subsequent reaction of the complex with the solvent molecule to produce free radicals responsible for initiation of polymerization has been postulated to account for the observed results.     

Benzoxazine-bismaleimide blends: Curing and thermal properties

A blend of bisphenol A based benzoxazine (Bz-A) and a bismaleimide (2,2-bis[4(4-maleimidophenoxy) phenyl] propane (BMI), was thermally polymerised in varying proportions and their cure and thermal characteristics were investigated. The differential scanning calorimetric analysis, supplemented by rheology confirmed a lowering of the cure temperature of BMI in the blend implying catalysis of the maleimide polymerisation by benzoxazine. FTIR studies provided evidences for the H-bonding between carbonyl group of BMI and -OH group of polybenzoxazine in the cured matrix. The cured matrix manifested a dual phase behaviour in SEM and DMTA with the minor phase constituted by polybenzoxazine dispersed in an interpenetrating polymer network (IPN) of polybenzoxazine and cured BMI. The IPN possessed improved thermal stability over the constituent polybenzoxazine. A benzoxazine monomer possessing allyl functional groups, 2,2′-bis(8-allyl-3-phenyl-3,4-dihydro-2H-1,3-benzoxazinyl) propane (Bz-allyl) was reactively blended with the same bismaleimide in varying stoichiometric ratios (Bz-allyl/BMI), where the curing involved mainly Alder-ene reaction between allyl- and maleimides groups and ring-opening polymerisation of benzoxazine. The rheological analysis showed the absence of catalytic polymerisation of BMI in this case. The overall processing temperature was lowered in the blend owing to the co-reaction of the two systems to form a single-phase matrix. The cured resins of both Bz-A/BMI and Bz-allyl/BMI blends exhibited better thermal stability than the respective polybenzoxazines. The T_g of the IPN was significantly improved over that of polybenzoxazine (Bz-A). However, the co-reaction resulted in a marginal decrease in the T_g of the system in comparison to the polybenzoxazine (Bz-allyl).     

First principles study of small palladium cluster growth and isomerization

Structures and physical properties of small palladium clusters Pd_n up to n = 15 and several selected larger clusters were studied using density functional theory under the generalized gradient approximation. It was found that small Pd_n clusters begin to grow 3‐dimensionally at n = 4 and evolve into symmetric geometric configurations, such as icosahedral and fcc‐like, near n = 15. Several isomers with nearly degenerate average binding energies were found to coexist and the physical properties of these clusters were calculated. For several selected isomers, relatively moderate energy barriers for structural interchange for a given cluster size were found, implying that isomerization could readily occur under ambient conditions. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Tetrahydroepoxides and diol epoxides of benz[c]acridine

The chemical synthesis and NMR characterization of the benzo ring tetrahydro- and diol epoxides of the carcinogen benz[c]acridine are described.     

Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Palladium-catalysed 5-endo-trig allylic (hetero)arylation

A palladium-catalysed intramolecular allylic (hetero)arylation strategy for the synthesis of fused cyclopentenes incorporated with all-carbon quaternary and spiro centres is described. The method is straightforward, shows broad scope, proceeds in synthetically useful yields, and provides a rare means to construct complex cyclopentanoids. The reaction is believed to involve a kinetically unfavourable 5-endo-trig carbocyclisation of the tethered (π-allyl)palladium system. Further, this method was successfully applied as the key step in the total synthesis of diterpene natural products taiwaniaquinone H and dichroanone.

A palladium-catalysed intramolecular allylic (hetero)arylation strategy for the synthesis of fused cyclopentenes incorporated with all-carbon quaternary and spiro centres is described.     

Enantioselective synthesis of (−)-α-conhydrine via cyclic sulfate methodology

An asymmetric synthesis of (−)-α-conhydrine is described using the Sharpless asymmetric dihydroxylation and the regiospecific nucleophilic opening of a cyclic sulfate as the key steps.     

Thermodynamics of silver—silver halide electrodes and thermodynamic solubility products of silver halides in glycerol + water mixtures at different temperatures

The standard potentials of silver—silver bromide and silver—silver iodide electrodes in glycerol+water mixtures containing 5, 10, 20 and 30 wt% glycerol were determined from electromotive force measurements of the cell Ag(s), AgX(s), KX(c)//KCl(c), AgCl(s), Ag(s), where X is Br or I, at seven different temperatures in the range 5–35°C. The standard potentials in each solvent are represented as a function of temperature. The standard thermodynamic functions for the electrode reactions, the primary medium effects of various solvents upon X⁻, and the standard thermodynamic quantities for the transfer of 1 g-ion of X⁻ from water to the respective glycerol + water media are evaluated and discussed in the light of ion—solvent interactions as well as the structural changes of the solvents. From the values of the Ag/Ag⁺ and Ag/AgX, X⁻ electrodes, the thermodynamic solubility product constants of silver chloride, silver bromide and silver iodide have been determined in glycerol + water solvent mixtures at different temperatures.     

New polypyromellitimide films based on cyclotriphosphazene and bisaspartimide derived diamines

Three new thermally stable polypyromellitimide films were made by the thermal cyclodehydration of the corresponding polyamic acids obtained by the polymerization of pyromellitic dianhydride with 4,4′-bis{N²-[4-(4-aminobenzyl)phenyl]aspartimido} diphenylmethane, 4,4′-bis{N²-[4-(4-aminophenoxy)phenyl]aspartimido} diphenylether, and bis(4-aminophenoxy)tetrakis (4-phthalamic acid phenoxy)cyclotriphosphazene. The bis(4-aminophenoxy)tetrakis (4-phthalamic acid phenoxy)cyclotriphosphazene was obtained from hexakis(4-aminophenoxy)cyclotriphosphazene involving its reaction with phthalic anhydride. The structure of these materials and precursors were characterized by using Fourier-transform-infrared (FT–IR) and proton nuclear magnetic resonance spectroscopy. The thermal stabilities of the films were evaluated by the thermogravimetric analysis, showing char yields at 800°C ranging from 68% to 58% in a nitrogen atmosphere and 24% in air atmosphere.     

A Pollution Sensitive Marxian Production Inventory Model with Deterioration Under Fuzzy System

Journal of Optimization Theory and Applications - This article deals with an economic production quantity (EPQ) model with deterioration under the effect of environmental pollution in fuzzy...