Elliptic boundary value problems with Gaussian white noise loads

Linear second order elliptic boundary value problems (BVP) on bounded Lipschitz domains are studied in the case of Gaussian white noise loads. The challenging cases of Neumann and Robin BVPs are considered.The main obstacle for usual variational methods is the irregularity of the load. In particular, the Neumann boundary values are not well-defined.In this work, the BVP is formulated by replacing the continuity of boundary trace mappings with measurability. Instead of variational methods alone, the novel BVP derives also from Cameron–Martin space techniques.The new BVP returns the study of irregular white noise to the study of $L^2$-loads.     

Synthesis and evaluation of a pseudocyclic tristhiourea-based anion host

A novel methodology for the evaluation of receptor arrangement in structurally flexible anion chemosensors was developed and applied to map the binding site of a new pseudocyclic tristhiourea chemosensor (6). The syntheses of 6 and related macrocyclic chemosensor 10 (a model of the folded monomeric structure of 6) are reported. Both chemosensors were evaluated by titration with a variety of structurally different anions in CH3Cl and DMSO, showing a common preference for F-, CH3CO2-, and H2PO4-. However, within this group of anions, the binding patterns of the chemosensors differed, indicating dissimilarity in the arrangement of the binding sites of 6 and 10.     

Effect of extraction conditions on measured total polyphenol contents and antioxidant and antibacterial activities of black tea

Black tea was extracted for 2, 8 and 18 h with absolute acetone, N,N-dimethyl-formamide (DMF), ethanol and methanol and their 50% aqueous solutions. The extracts were screened for total polyphenol contents, antioxidant and antibacterial activities. The polyphenol content of the extracts was found to be in the range of 0.44-114.01 mg gallic acid equivalents (GAE)/g dry weight tea, depending on the solvent used and the length of the extraction process. In general, aqueous acetone or DMF extracts displayed the highest polyphenol contents and antioxidant activity, while absolute acetone was the least efficient solvent. Antioxidant activities of tea extracts tested using the reducing power and 2,2-diphenyl-1-picryhydrazyl (DPPH) radical methods ranged from 0.09 to 1.18 and from 2.60 to 95.42 %, respectively, depending on the extraction conditions and the antioxidant activities correlated well with the polyphenol concentrations. Aqueous solvent black tea extracts also possessed antibacterial activity, depending on the solvent used and bacterial species tested. Staphylococcus aureus was found to be the most sensitive to all tea extracts, except for the methanol extract. Tea extracts were not effective against Y. enterocolitica, L. monocytogenes and E. coli O157:H7.     

Analysis of plate in second strain gradient elasticity

The bending analysis of a thin rectangular plate is carried out in the framework of the second gradient elasticity. In contrast to the classical plate theory, the gradient elasticity can capture the size effects by introducing internal length. In second gradient elasticity model, two internal lengths are present, and the potential energy function is assumed to be quadratic function in terms of strain, first- and second-order gradient strain. Second gradient theory captures the size effects of a structure with high strain gradients more effectively rather than first strain gradient elasticity. Adopting the Kirchhoff’s theory of plate, the plane stress dimension reduction is applied to the stress field, and the governing equation and possible boundary conditions are derived in a variational approach. The governing partial differential equation can be simplified to the first gradient or classical elasticity by setting first or both internal lengths equal to zero, respectively. The clamped and simply supported boundary conditions are derived from the variational equations. As an example, static, stability and free vibration analyses of a simply supported rectangular plate are presented analytically.     

Short-time reactor neutron irradiation of YSZ prepared using reactive calcination method

The present work is devoted to study the short-time reactor neutron irradiation of yttria stabilised zirconia (YSZ) at 315 K. The samples were prepared by the reactive calcination method and characterised by X-ray diffraction (XRD) analysis and scanning electronic microscope. The prepared samples were irradiated by reactor neutrons at different exposure times and investigated by XRD analysis. The results obtained show good radiation resistance of YSZ to reactor neutron irradiation.     

Rapid honey characterization and botanical classification by an electronic tongue

In this paper a commercial electronic tongue (αAstree, Alpha M.O.S.) was applied for botanical classification and physicochemical characterization of honey samples. The electronic tongue was comprised of seven potentiometric sensors coupled with an Ag/AgCl reference electrode. Botanical classification was performed by PCA, CCA and ANN modeling on 12 samples of acacia, chestnut and honeydew honey. The physicochemical characterization of honey was obtained by ANN modeling and the parameters included were electrical conductivity, acidity, water content, invert sugar and total sugar. The initial reference values for the physicochemical parameters observed were determined by traditional methods. Botanical classification of honey samples obtained by ANN was 100% accurate while the highest correlation between observed and predicted values was obtained for electrical conductivity (0.999), followed by acidity (0.997), water content (0.994), invert sugar content (0.988) and total sugar content (0.979).All developed ANN models for rapid honey characterization and botanical classification performed excellently showing the potential of the electronic tongue as a tool in rapid honey analysis and characterization. The advantage of using such a technique is a simple sample preparation procedure, there are no chemicals involved and there are no additional costs except the initial measurements required for ANN model development.     

Analysis of the first thermal response test in Algeria

Ground source heat pumps (GSHPs) mean attractive heating and cooling systems. Optimum design of a borehole heat exchanger (BHE), as the outer part of a GSHP heating system, requires knowledge of the thermal properties of the soil. Those data, the effective thermal conductivity of the soil λ_eff and the average temperature of the soil T ₀ enable us to determine the necessary number and depth of boreholes. The determination of thermal conductivity of the soil in laboratory experiments does not usually coincidence with the data under in situ conditions. Therefore, an in situ method of experimental determination of these parameters, thermal response testing (TRT) is used primarily for in situ determination of design data for BHEs. In this study, which was the first TRT in Algeria (Tlemcen site), the purpose was to determine the effective ground thermal conductivity. Measured data were evaluated by the line source model. Used method and performed evaluation are presented for a borehole drilled in clay, silt, and sand. The resulting effective ground thermal conductivity was 1.364 W/m K and the borehole thermal resistance was 0.18 K/(W/m).     

Electrorheology and creep-recovery behavior of conducting polythiophene/poly(oxymethylene)-blend suspensions

Electrorheological properties and creep-recovery behavior of polythiophene/polyoxymethylene-blend having PT（50%）/POM（50%） composition were investigated.Particle size,conductivity and dielectric values were measured to be 24.77μm,3.85×10^-5 S·m^-1 and 26.75,respectively.Sedimentation ratio was measured to be 64%at the end of 16 days.The effects of dispersed particle volume fraction,external electric field strength,shear rate,frequency and temperature on ER properties and storage modulus of PT/POM-blend/silicone oil（SO） suspensions were examined.Enhancement were observed in the electric field viscosities of the suspensions and thus they were classified as a smart material.Shear thinning non-Newtonian viscoelastic behavior was determined for PT/POM-blend/SO system.Further,time-dependent deformation was examined by creep-recovery tests and recoverable viscoelastic deformation established.