Hydrogen production by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts

Hydroxyapatite-supported Ni-Ce-Cu catalysts were synthesised and tested to study their potential for use in the steam reforming of glycerol to produce hydrogen. The catalysts were prepared by the deposition-precipitation method with variable nickel, cerium, and copper loadings. The performance of the catalysts was evaluated in terms of hydrogen yield at 600°C in a tubular fixed-bed microreactor. All catalysts were characterised by the BET surface area, XRD, TPR, TEM, and FE-SEM techniques. The reaction time was 240 min in a fixed-bed reactor at 600°C and atmospheric pressure with a water-to-glycerol feed molar ratio of 8: 1. It was found that the Ni-Ce-Cu (3 mass %-7.5 mass %-7.5 mass %) hydroxyapatite-supported catalyst afforded the highest hydrogen yield (57.5 %), with a glycerol conversion rate of 97.3 %. The results indicate that Ni/Ce/Cu/hydroxyapatite has great potential as a catalyst for hydrogen production by steam reforming of glycerol.     

Novel use of mesoporous aluminas as supports for Cp2ZrCl2 and Cp*ZrMe3: Ethylene polymerization and formation of polyethylene nanofibers

Mesoporous aluminas with average pore sizes of 4.3–7.8 nm were prepared by anodization of an aluminum film (AAO), and by a sol–gel templating method (TPL). In addition to a commercial alumina and sulfated TPL, the aluminas were used as supports for cyclopentadienyl zirconocene dichloride (Cp₂ZrCl₂) and trimethyl(η5‐pentamethylcyclopentadienyl)zirconium (Cp*ZrMe₃) and tested in the polymerization of ethylene. The metallocenes supported on the alumina prepared with the templating method and its sulfated modification exhibited polymerization activities of 440 and 350 kg_PE/(mol_Zr × h × bar), respectively, comparable to that obtained with silica‐supported metallocenes (390 kg_PE/(mol_Zr × h × bar)). The acid site distribution of the aluminas was studied with FTIR and temperature programmed desorption (TPD) of pyridine, and also the amount of medium and strong acid sites was determined gravimetrically from the adsorption of pyridine. Relative to the surface area, AAO with the highest amount of acid sites (2.10 μmol_py/m) adsorbed Cp₂ZrCl₂ and Cp*ZrMe₃ the most. Study of the polymers' morphology with a scanning electron microscope revealed polyethylene nanofibers in all the polymer samples, also in those obtained from the reference polymerizations with homogeneous Cp₂ZrCl₂ and Cp*ZrMe₃. This finding suggests that a catalyst support with a tubular pore structure is not a prerequisite for the formation of polymer nanofibers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4002–4012, 2007     

A One‐Pot Synthesis of N‐Aryl‐2‐Oxazolidinones and Cyclic Urethanes by the Lewis Base Catalyzed Fixation of Carbon Dioxide into Anilines and Bromoalkanes

The multicomponent assembly of pharmaceutically relevant N‐aryl‐oxazolidinones through the direct insertion of carbon dioxide into readily available anilines and dibromoalkanes is described. The addition of catalytic amounts of an organosuperbase such as Barton's base enables this transformation to proceed with high yields and exquisite substrate functional‐group tolerance under ambient CO₂ pressure and mild temperature. This report also provides the first proof‐of‐principle for the single‐operation synthesis of elusive seven‐membered ring cyclic urethanes.     

Toxic and trace element analysis of surface sediments from the Gulf of Saros by INAA and XRF methods

Some surface sediment samples, collected from 53 sampling sites of the Saros Gulf, were analyzed quantitatively by radioisotope energy dispersive X-ray fluorescence (EDXRF) and instrumental neutron activation analysis (INAA). Results indicated some correlations between Rb and Sr (r = 0.64), Fe₂O₃ and MnO (r = 0.59), Th and La (r = 0.71), Th and Ce (r = 0.64), Th and Sm (r = 0.60), concentration pairs. U and Th results are found to be compatible with those given in the literature for marine sediments.     

Intersubband transitions in quantum wells under intense laser field

An intense laser field effect on the intersubband transitions in quantum wells is theoretically investigated within the framework of the effective-mass approximation. Results obtained show that intersubbband optical transitions and energy levels in quantum wells can be significantly modified and controlled by an intense laser field. PACS 71.55.Eq; 73.21.Fg; 78.67.De     

Zirconium-loaded activated charcoal as an adsorbent for arsenic, selenium and mercury

The adsorption of arsenic, selenium and mercury from aqueous solutions onto zirconium-loaded activated charcoal was studied as a function of adsorption time, amount of adsorbent, pH, concentration of adsorbates, sample volume and the oxidation states of the adsorbates. The cross-interference of the analytes was also investigated. Loaded filters were measured by energy-dispersive X-ray fluorescence spectrometry (EDXRF) and the amount of the unadsorbed analytes were determined by vapour generation atomic absorption spectrometry (VGAAS).     

Underwater speech communications with a modulated laser

A novel speech communications system using a modulated laser beam has been developed for short-range applications in which high directionality is an exploitable feature. Although it was designed for certain underwater applications, such as speech communications between divers or between a diver and the surface, it may equally be used for air applications. With some modification it could be used for secure diver-to-diver communications in the situation where untethered divers are swimming close together and do not want their conversations monitored by intruders. Unlike underwater acoustic communications, where the transmitted speech may be received at ranges of hundreds of metres omnidirectionally, a laser communication link is very difficult to intercept and also obviates the need for cables that become snagged or broken. Further applications include the transmission of speech and data, including the short message service (SMS), from a fixed installation such as a sea-bed habitat; and data transmission to and from an autonomous underwater vehicle (AUV), particularly during docking manoeuvres. The performance of the system has been assessed subjectively by listening tests, which revealed that the speech was intelligible, although of poor quality due to the speech algorithm used. PACS 42.55.Px; 42.60.By; 42.62.-b     

Simple preparation of iron stabilized carboxonium ions. Concurrent complexation,rearrangement and alcohol addition to terminal acetylenes

CpFe(CO)₂[C(OEt)R]BF₄ complexes can be prepared by reaction of CpFe(CO)₂(isobutylene)BF₄ with monoalkylated acetylenes in methylene chloride/ethanol solutions. Methyl propiolate yields methyl trans-2-ethoxy-acrylate, in a reaction catalytic in CpFe(CO)₂(isobutylene)BF₄, and internal acetylenes can be transformed to CpFe(CO)₂(vinyl ether)BF₄ complexes.     

The diamagnetic susceptibilities of donors in quantum wells with anisotropic effective mass

The diamagnetic susceptibility of a hydrogenic donor placed in Si, Ge and GaAs quantum wells with infinite confinement potential which have different effective mass anisotropy parameters (γ=_m⊥/_m∥$\gamma =m_{\perp }/m_{\parallel }$) has been investigated as a function of the well sizes. The binding energies of the donor have also been computed using a trial wave function with two parameters in the framework of the effective mass approximation. It has been observed that the diamagnetic susceptibility of the donor in the anisotropic materials converges rapidly to the bulk limit as the well size increases.     

Quantum Chemical,Spectroscopic, and X-Ray Diffraction Studies of N-diphenylphosphino-4-methylpiperidine Selenide (1)

The title molecule, N-diphenylphosphino-4-methylpiperidine selenide(1), was prepared and characterized by elemental analysis, ¹H-NMR, ³¹P-{¹H} NMR, IR, and X-ray single-crystal determination. The compound crystallizes in the monoclinic space group P 2₁/c. In addition to the molecular geometry from X-ray determination, vibrational frequencies and gauge, including atomic orbital (GIAO) ¹H- and ³¹P-{¹H} NMR chemical shift values of the title compound (1) in the ground state, were calculated using the Hartree–Fock and density functional methods with the 6-31G(d, p) basis set. The calculated results show that the optimized geometries can well reproduce the crystal structures. Besides, the theoretical vibrational frequencies and chemical shift values show good agreement with experimental values. The predicted nonlinear optical (NLO) properties of the title compound are greater than those of urea. In addition, density functional theory (DFT) calculations of the molecular electrostatic potentials (MEPs), frontier molecular orbitals (FMOs) of the title compound were carried out at the B3LYP/6-31G(d) level of theory.