Scaling impacted structures

Summary The problem of non-scalability of structures under impact loads caused by strain-rate effects is solved in this article by properly correcting the impact velocity. The technique relies on the use of an alternative dimensionless basis, together with a mathematical model which allows the calculation of a correction factor for the impact velocity. This new velocity, when applied to the model, makes it to assure the satisfaction of the scaling laws. The indirect similitude method detailed here is applied to two strain-rate sensitive structures, a double plate under in-plane impact and a beam subjected to a blast load. The results show a very good agreement so that the model and a prototype made from strain rate sensitive materials behave the same.accepted for publication 3 March 2004     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

The response of thermally and optically stimulated luminescence from Al2O3:C to high-energy heavy charged particles

The thermoluminescence (TL) and optically stimulated luminescence (OSL) response of Al₂O₃ dosimeters to high-energy heavy charged particles (HCP) has been studied using the heavy ion medical accelarator at Chiba, Japan. The samples were Al₂O₃ single-crystal chips, of the type usually known as TLD-500, and Luxel^TM dosimeters (Al₂O₃:C powder in plastic) from Landauer Inc. The samples were exposed to ⁴He (150 MeV/u), ¹²C (400 MeV/u), ²⁸Si (490 MeV/u) and ⁵⁶Fe (500 MeV/u) ions, with linear energy transfer values covering the range from 2.26 to 189 keV/μm in water and doses from 1 to 100 mGy (to water). A ⁹⁰Sr/⁹⁰Y beta source, calibrated against a ⁶⁰Co secondary standard, was used for calibration purposes. For OSL, we used both continuous-wave OSL measurements (CW-OSL, using green light stimulation at 525 nm) and pulsed OSL measurements (POSL, using 532 nm stimulation from a Nd:YAG Q-switched laser). The efficiencies (η_HCP,γ) of the different HCPs at producing OSL or TL were observed to depend not only upon the linear energy transfer (LET) of the HCP, but also upon the sample type (single crystal chip or Luxel^TM) and the luminescence method used to define the signal—i.e. TL, CW-OSL initial intensity, CW-OSL total area, or POSL. Observed changes in shape of the decay curve lead to potential methods for extracting LET information of unknown radiation fields. A discussion of the results is given, including the potential use of OSL from Al₂O₃ in the areas of space radiation dosimetry and radiation oncology.     

Evolution of the high power THz source program at Jefferson Lab

We report the evolution of the high power THz source program at Jefferson Lab. The source is based on coherent synchrotron radiation in which short bunches of relativistic electrons radiate when traversing a dipolar magnetic field. In our first accelerator we produced 20 W of broadband THz light. Our upgraded accelerator with higher current and improved THz extraction optics will considerably enhance the output power to >100 W. In this paper we describe the source in some detail and present theoretical calculations for the upgrade.     

Special points for calculating integrals over the primitive cell of a periodic system

A method is proposed for constructing appropriate sets of special points in the Brillouin zone in which the extended unit cell method is used with a subsequent shift from the center of the reduced Brillouin zone. The proposed method offers several advantages over the commonly used Monkhorst-Pack method. The difference in the construction of sets of special points for the direct and reciprocal lattices is discussed for crystals belonging to a nonsymmorphic space group. The cases of a planar square lattice and an fcc lattice are considered to illustrate general results.     

New data on the ternary fission of 252Cf from the Gammasphere facility

Ternary fission of ²⁵²Cf was studied at Gammasphere using eight ΔE×E particle telescopes. Helium, beryllium, boron, and carbon light charged particles (LCPs) emitted with kinetic energy more than 9, 21, 26, and 32 MeV, respectively, were identified. The 3368-keV γ transition from the first 2⁺ excited state in ¹⁰Be was found and the population probability ratio N(2⁺)/N(0⁺) = 0.160 ± 0.025 was estimated. No evidence was found for 3368-keV γ rays emitted from a triple molecular state. For the first time, charge distributions are obtained for ternary fission fragments emitted with helium, beryllium, and carbon LCPs.     

Elasticity and inelasticity of biomorphic silicon carbide ceramics

The effect of the vibration strain amplitude on the Young modulus and ultrasonic absorption (internal friction) in biomorphic SiC ceramics is investigated in the temperature range 116–296 K. The biomorphic SiC ceramics is prepared through pyrolysis of eucalyptus with subsequent infiltration of silicon. It is demonstrated that the vibration loading of samples in air and under vacuum is accompanied by a number of unexpected effects. The behavior of the studied ceramics is governed by at least two mechanisms, which, to a large extent, are responsible for the elastic and inelastic properties of the material. One mechanism is associated with the adsorption-desorption of environmental molecules (hypothetically, owing to the presence of pores and residual carbon), and the other mechanism involves microplastic deformation due to the motion of dislocations or other (similar) structural units.     

Analogues of Coherent and Dissipative Structures in Social and Historical Processes

An analogy between social and hydrodynamic processes is developed. The relation of the state system to the passionarity theory suggested by L. N. Gumilev is discussed.