Identification de stérols à chaîne latérale oxygénée dans une éponge de l'espèce Hyrtios

Thirty-two sterols are identified in the sponge Hyrtios sp. In addition to fourteen monohydroxylated compounds, the sterol fraction contains eight functionalized sidechain sterols, three of them new: 3 β-hydroxy-24-norchol-5-en-23-al (19) , (22-trans)-3 β-hydroxycholest-5, 22-dien-24-one (20) and (22R, 23R, 24S) or (22S, 23S, 24S)- 22,23-epoxy-24-methylchoest-5-en-3 β-ol (24). The probable biological origin, rather than artifact production, of these undescribed components is discussed.     

Ionic liquid soluble photosensitizers

The preparation and investigation of triplet photosensitizers designed to be preferentially soluble in room-temperature ionic liquids are reported. Photosensitizers prepared by covalent attachment of 1-methylimidazole to aryl ketones are soluble in ionic liquids and remain in the ionic liquid layer when the solution is extracted with an organic solvent. The photosensitized isomerization of trans-β-ionol to cis-β-ionol was efficiently carried out in ionic liquid solution with the product ionol being extracted and the sensitizer/ionic liquid mixture being re-used in additional photosensitization reactions. The scope and utility of the sensitizers in sensitizing other reactions are discussed.     

Simultaneous Determination of Glyphosate,Glufosinate, and Aminomethylphosphonic Acid by Capillary Electrophoresis After 9‐Fluorenylmethyl Chloroformate Derivatization

A capillary electrophoresis (CE) with UV absorption detection method is described for the simultaneous determination of glufosinate, glyphosate, and aminomethylphosphoric acid. The 9‐fluorenylmethyl chloroformate (FMOC‐Cl) was used for precolumn derivatization of the non‐absorbing herbicides. The three analytes were separated by CE in 9 min with 25 mM borate buffer at pH 9, followed by detection with a UV detector at 260 nm. We demonstrate how the detection limit can be enhanced by using acetonitrile‐salt mixtures. With acetonitrile‐salt mixtures, the limit of detection (LOD) was in the 10^?7 M range. Linearity of more than two orders of magnitude was generally obtained. Precisions of migration times and peak areas were less than 0.9% and 7.5%, respectively. The applicabilities of the method for the analysis of ground water and lake water were examined.     

Dinuclear and Mononuclear Platinum(II) and Palladium(II) Complexes with Modified 2,2′‐Dipyridylamine Ligands Featuring a Cisplatin Analogous Structure Motif

In modern cancer therapy the clinical application of platinum‐based drugs is more and more limited by the occurrence of intrinsic or acquired resistances. In this context the potential use of dinuclear platinum complexes in chemotherapy is increasingly relevant. The novel complexes Pd(Bzdpa)Cl₂, Pd₂(C₄H₈(dpa)₂)Cl₄, and Pt₂(C₄H₈(dpa)₂)Cl₄ allow a direct comparison of mono‐ and dinuclear palladium and platinum complexes respectively deriving from a 2,2′‐dipyridylamine (Hdpa) ligand system. They were characterized by single crystal X‐ray analysis as well as infrared spectroscopy and elemental analysis. The cisplatin analogous mononuclear palladium complex Pd(Bzdpa)Cl₂ ( 1 ) (Bzdpa: (2,2′‐dipyridylbenzyl)amine) belongs to a range of 2,2′‐dipyridylamine‐based compounds which were extensively studied in our laboratories. 1 crystallizes in the orthorhombic space group Pna2₁ with a = 13.722(3), b = 13.457(3), c = 9.483(2), V = 1751.1(6) ų, and Z = 4. The metal binding motif of 1 was expanded by a flexible butyl‐linker to form the tetradentate C₄H₈(dpa)₂ ligand. The resulting isotypic dinuclear complexes Pd₂(C₄H₈(dpa)₂)Cl₄·2CH₃CN ( 2 ) and Pt₂(C₄H₈(dpa)₂)Cl₄·2CH₃CN ( 3 ) crystallize in the triclinic space group with a = 7.8427(2), b = 8.7940(2), c = 11.7645 (3), α = 79.219(2)°, β = 84.033(2)°, γ = 87.744(2)°, V = 792.58(3) ų ( 2 ) and a = 7.831(5), b = 8.814(5), c = 11.817(5), α = 79.271(5)°, β = 83.571(5)°, γ = 88.063(5)°, V = 796.3(8) ų ( 3 ), both with one centrosymmetrical molecule in the unit cell.     

Mass spectrometric interrogation of thioester-bound intermediates in the initial stages of epothilone biosynthesis

Direct detection of thioester intermediate mixtures bound to EpoC, a 195 kDa polyketide synthase, has been achieved using limited proteolysis and Fourier-transform mass spectrometry (FTMS). Incubation with various N-acetylcysteamine thioester (S-NAC) substrate mimics produced mass shifts on the EpoC ACP domain consistent with their condensation with an enzyme-bound carbanion produced by the decarboxylation of methylmalonyl-S-EpoC. Reconstitution of EpoA-ACP, EpoB, and EpoC gave a +165.0 Da mass shift consistent with the formation of the methylthiazolyl-methacrylyl product by incorporation of acetyl-CoA, cysteine, and methylmalonyl-CoA. Thioester-templated reaction intermediates and products are typically characterized by quantifying radioactive substrates, either enzyme bound or chemically hydrolyzed. In contrast, the MS-based methodology described here provides semiquantifiable ratios of free enzyme, intermediate, and product occupancy and reveals that certain substrates result in a >50% formation of nonproductive intermediates.     

Structures and cytotoxicities of fascaplysin and related alkaloids from two marine phyla—Fascaplysinopsis sponges and Didemnum tunicates

The structural variations and bioactivity properties of the alkaloids in the fascaplysin (1) and the reticulatine (3) families were examined. Four organisms were analyzed consisting of two collections of the sponge Fascaplysinopsis reticulata and two collections of the tunicate Didemnum sp. Reported are the isolation of three new compounds: 3-bromofascaplysin (2), 14-bromoreticulatine (4), and 14-bromoreticulatate (6) along with reticulatate (5) previously known as a semi-synthetic product of 1. Compounds 1 and 5 showed selectivity in a cell based cytotoxicity assay.     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

Speciation of cyclo(Pro-Gly)<Subscript>3</Subscript> and its divalent metal-ion complexes by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) was used to study the binding of selected group II and divalent transition-metal ions by cyclo(Pro-Gly)3 (CPG3), a model ion carrier peptide. Metal salts (CatXn) were combined with the peptide (M) at a molar ratio of 1:10 M/Cat in aqueous solvents containing 50% vol/vol acetonitrile or methanol and 1 or 10 mM ammonium acetate (NH4Ac). Species detected include [M+H]+, [M+Cat-H]+, [M2+Cat]2+, [M+Cat+Ac]+, and [M+Cat+X]+. The relative stabilities of complexes formed with different cations (Mg2+, Ca2+, Sr2+, Mn2+, Co2+, Ni2+, Cu2+, and Zn2+) were determined from the abundance of 1:1 and 2:1 M/Cat species relative to that of the unbound peptide. The largest metal ions (Ca2+, Sr2+, and Mn2+) formed the most stable complexes. Reducing the buffer concentration increased the overall extent of metal binding. Results show that the binding specificity of CPG3 depends upon the size of the metal ion and its propensity for electrostatic interaction with oxygen atoms. Product ion tandem mass spectrometry of [M+H]+ and [M+Cu-H]+ confirmed the cyclic structure of the peptide, although the initial site(s) of metal attachment could not be determined.     

Studies with enaminones: The reaction of enaminones with aminoheterocycles. A route to azolopyrimidines,azolopyridines and quinolines

The enaminones 1b,d,f react with 4‐phenyl‐3‐methyl‐5‐pyrazoleamine 3a to yield the pyrazole derivatives 4a‐c that cyclised readily on reflux in pyridine solution in presence of hydrochloric acid to yield the pyrazolo[1,5‐a]pyrimidines 5a‐c. Similarly 3(5)‐amino‐1H‐triazole (3b) reacted with 1b,d,f to yield the triazolo[1,5‐a]pyrimidines 5d‐f. In contrast attempted condensation of the 5‐tetrazoloamine (3c) with 1a,d,e resulted in its trimerisation and only triaroylbenzene 8a,d,e was isolated. The reaction of 1a,b,d with anthranilonitrile 9a and the reaction of 1a‐c with the 2‐aminocyclohexene thiophene‐3‐nitrile 10a afforded the cis enaminones 11a‐c and 12a‐c. Similarly, reaction of 1a‐c with the methylanthranilate 9b and reaction of 1b,e with ethyl 2‐aminocyclohexene thiophene‐3‐carboxylate 10b afforded the cis enaminones 11d‐f and 12d,e respectively. Attempted cyclization of 11a‐c into quinoline failed. Successful cyclization of 11d into the quinolinone 13 could be affected, on heating for five minutes in a domestic microwave oven at full power. The reaction of 1a‐c,f with piperidine afforded the trans enaminones 14a‐d. Similarly, trans 14e was formed from the reaction of 1b with morpholine. The coupling reaction of 1b with excess of benzene diazonium chloride afforded the formazane 16. The enaminone 2 reacted with heterocyclic amines to yield the pyridones 17,18.     

Barrier-free intermolecular proton transfer induced by excess electron attachment to the complex of alanine with uracil

The photoelectron spectrum of the uracil-alanine anionic complex (UA)(-) has been recorded with 2.540 eV photons. This spectrum reveals a broad feature with a maximum between 1.6 and 2.1 eV. The vertical electron detachment energy is too large to be attributed to an (UA)(-) anionic complex in which an intact uracil anion is solvated by alanine, or vice versa. The neutral and anionic complexes of uracil and alanine were studied at the B3LYP and second-order M?ller-Plesset level of theory with 6-31++G(*) (*) basis sets. The neutral complexes form cyclic hydrogen bonds and the three most stable neutral complexes are bound by 0.72, 0.61, and 0.57 eV. The electron hole in complexes of uracil with alanine is localized on uracil, but the formation of a complex with alanine strongly modulates the vertical ionization energy of uracil. The theoretical results indicate that the excess electron in (UA)(-) occupies a pi(*) orbital localized on uracil. The excess electron attachment to the complex can induce a barrier-free proton transfer (BFPT) from the carboxylic group of alanine to the O8 atom of uracil. As a result, the four most stable structures of the uracil-alanine anionic complex can be characterized as a neutral radical of hydrogenated uracil solvated by a deprotonated alanine. Our current results for the anionic complex of uracil with alanine are similar to our previous results for the anion of uracil with glycine, and together they indicate that the BFPT process is not very sensitive to the nature of the amino acid's hydrophobic residual group. The BFPT to the O8 atom of uracil may be relevant to the damage suffered by nucleic acid bases due to exposure to low energy electrons.