Oxidative addition of dialkylphosphites to complexes of iridium(I) and rhodium(I)

The PH bond of dialkylphosphites (dimethylphosphite, 5,5-dimethyl-1,3-dioxa-2-phosphorinane and 4,4,5,5-tetramethyl-1,3-dioxa-2-phospholane) oxidatively adds to irClL₂(L = PPh₃, AsPh₃) and IrCl(PMe₂Ph)₃ generated in situ to give six-coordinate hydrido(dialkylphosphonato)iridium(III) complexes, e.g. IrHClL₂[{(MeO)₂-PO}₂H] and IrHCl(PMe₂Ph)₃[PO(OMe)₂]. Addition of triphenylphosphine to a solution containing [IrCl(C₈H₁₄)₂]₂ and dimethylphosphite in a 1:2 mol ratio gives a five-coordinate hydrido (dimethylphosphonato)iridium(III) complex IrHCl(PPh₃)₂{PO(OMe)₂}, from which six-coordinate pyridine and acetylacetonato complexes IrHCl(PPh₃)₂(C₅H₅N){PO(OMe)₂} and IrH(PPh₃)₂(acac){PO(OMe)₂} can be obtained. The ligand arrangements in the various complexes are inferred from IR, ¹H and ³¹P NMR data.     

Siloxane-containing polyenaminoesters

Polyenaminoesters were prepared by condensation of succinyl succinic ester (SSE) and p-bis-carbomethoxy diacetyl benzene (CDB) with 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane. Conditions of solvent and temperature were discovered which yielded soluble polymer from SSE after heat treatment. CDB yields only tough, rubbery, insoluble products.     

Gas chromatographic-electron-impact mass fragmentometric determination of lysergic acid diethylamide in urine

A sensitive method for the detection and quantitation of lysergic acid diethylamide (LSD) in urine was developed. After initial solvent extraction, the compound was further purified by liquid-liquid extraction or by solid-phase extraction. The trimethylsilyl derivative of LSD was detected by gas chromatography-mass spectrometry (GC-MS) operated in the electron-impact mode with selected-ion monitoring. The presence of LSD was confirmed by comparing retention times and relative abundances of ions of unknowns with that of a standard. The recovery of this procedure was greater than 89%. The intra-run and inter-run coefficients of variation were less than 5% and less than 7%, respectively. This procedure allows detection of LSD concentrations as low as 29 pg/ml. Quantitation of LSD was linear over the concentration range 50-2000 pg/ml.     

2,8'-disubstituted-1,1'-binaphthyls: a new pattern in chiral ligands

The title binaphthyls 19 and 26, which are the positional isomers of 2-methoxy-2'-(diphenylphosphino)-1,1'-binaphthyl (MOP, 19) and 2-amino-2'-hydroxy-1,1'-binaphthyl (NOBIN, 26), have been synthesized by Suzuki coupling as the key step (10 + 15-->18), followed by functional group transformations, involving C-P and C-N bond formation (18-->19 and 18-->23). Racemic intermediate 22 was resolved by co-crystallization with N-benzylcinchonidinium chloride and the absolute configuration determined by X-ray crystallography. These novel binaphthyls are configurationally stable and, as such, potentially usable as chiral ligands in asymmetric reactions. Michael addition of the glycine-derived enolate 40 to methyl acrylate, carried out in the presence of (R)-(-)-27 as the chiral phase-transfer catalyst, afforded L-glutamic acid (S)-(+)-43 of 92% ee (after hydrolysis of the primary product).     

Halide adsorption on single-crystal silver substrates: dynamic simulations and ab initio density functional theory

We investigate the static and dynamic behaviors of a Br adlayer electrochemically deposited onto single-crystal Ag(100) using an off-lattice model of the adlayer. Unlike previous studies using a lattice-gas model, the off-lattice model allows adparticles to be located at any position within a two-dimensional approximation to the substrate. Interactions with the substrate are approximated by a corrugation potential. Using density functional theory (DFT) to calculate surface binding energies, a sinusoidal approximation to the corrugation potential is constructed. A variety of techniques, including Monte Carlo and Langevin simulations, are used to study the behavior of the adlayer. The lateral root-mean-square (rms) deviation of the adparticles from the binding sites is presented along with equilibrium coverage isotherms, and the thermally activated Arrhenius barrier-hopping model used in previous dynamic Monte Carlo simulations is tested.     

Size control of dendrimer-templated silica

One of the most significant challenges facing the biomimetic synthesis of materials is achieving the requisite level of dimensional and spatial control. Typical reaction conditions for biomimetic silica synthesis allow for continued growth and ripening leading to the formation of larger nanospheres on the order of 200-600 nm in diameter. Herein, we have used polyamidoamine and polypropylenimine dendrimers as templates to expand the reaction conditions of biogenic silica production to produce a more robust synthesis leading to size-selective precipitation of silica nanospheres. Through the use of defined concentrations of phosphate buffer and main group metal chloride salts, we have shown that the biomimetic silica growth process is controlled by cationic neutralization of the anionic silica nanosphere surface. Neutralization minimizes electrostatic repulsions, allowing for agglomerization and continued growth of nanospheres. By controlling these concentrations, we can selectively produce silica nanospheres of desired dimensions between 30 and 300 nm without adversely affecting the template's activity.     

Development of a gas chromatography/ion trap mass spectrometry based method for the quantification of polybrominated diphenyl ethers and polychlorinated biphenyls in adipose tissue

A combined gas chromatographic mass spectrometric (GC/MS/MS) method for the determination of seven polybrominated diphenyl ethers (PBDEs) and seven marker polychlorinated biphenyls (PCBs) in adipose tissue has been developed. Adipose tissue was melted and filtered through anhydrous sodium sulphate to obtain pure fat. Clean-up was performed using a glass column containing acidified silica, deactivated alumina and anhydrous sodium sulphate. Polybrominated biphenyl (PBB) 155 and Mirex were added as internal standards for PBDEs and PCBs, respectively. Injection standards, PBB 103 and PCB 143, for PBDEs and PCBs, respectively, were added before analysis with GC/MS/MS. The developed GC/MS/MS method has the advantage of being more selective than single MS methods because matrix effects are largely eliminated. Validation of this method was conducted according to Commission Decision 2002/657/EC. Decision limits for PBDEs and PCBs ranged from 0.06-0.15 ng g(-1) and from 0.35-1.22 ng g(-1), respectively. Detection capabilities were all between 0.23-0.55 ng g(-1) for PBDEs and between 0.98-2.29 ng g(-1) for PCBs. Precision, recovery, bias and selectivity were tested, with satisfactory results.     

Effect of amine ligand bulk on the interaction of methionine with platinum(II) diamine complexes

Molecular mechanics and dynamics calculations have been used in conjunction with experimental data to study the effects of amine ligand bulk on the formation of both guanine and methionine complexes with platinum diamine compounds. The AMBER force field has been supplemented with previous modifications [Yao; et al. Inorg. Chem. 1994, 33, 6061-6077. Cerasino; et al. Inorg. Chem. 1997, 36, 6070-6079] and has been further modified to include parameters for platinum bound to the sulfur atom of methionine. Molecular mechanics calculations with this modified AMBER force field have suggested that a platinum complex with two sulfur-bound methionine ligands and a bulky diamine ligand (N,N,N',N'-tetramethylethylenediamine, Me(4)en) would have severe interligand clashes; such interligand clashes are less pronounced in bis(9-ethylguanine) complexes. Consistent with these observations, NMR studies with [Pt(Me(4)en)(D(2)O)(2)](2+) have indicated that guanine 5'-monophosphate reacts in a 2:1 guanine:platinum ratio while both methionine and N-acetylmethionine react with only a 1:1 stoichiometry. Methionine forms a chelate via the sulfur and nitrogen atoms whereas N-acetylmethionine forms a chelate via the sulfur and oxygen atoms. The oxygen of the latter chelate can be displaced by the addition of guanosine 5'-monophosphate, although complete displacement of the N-acetylmethionine was not observed.     

Surface chemical analysis of raw cotton fibres and associated materials

The surface chemical composition of raw unscoured cotton was successfully investigated by the surface analytical techniques X-ray Photoelectron Spectroscopy (XPS) and Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The presence of non-cellulosic material at the fibre surface was established and determined to be a complex mixture of fatty acids, alcohols, alkanes, esters and glycerides. The effect of scouring and bleaching was to reduce the surface concentration of these materials but even after aqueous processing some non-cellulosic material residue was still detected at the fibre surface.     

Examining the role of surfactant packing in phase transformations of periodic templated silica/surfactant composites

In this work, we examine the role of curvature and surfactant packing in controlling the structure of periodic silica/surfactant composites by driving such materials through a transformation from a hexagonal to a lamellar phase. We focus on how the interplay of desired packing and volume constraints dictates the resulting structures. In general, surfactants expand in a complex way upon heating, and this can cause a change in the optimal packing geometry. However, the presence of a rigid silica framework may prevent surfactants from reaching this preferred volume and/or curvature. Real-time in situ X-ray diffraction is used to monitor the structural evolution of these materials heated under hydrothermal treatments. Because the thermal-driven disorder of the surfactant tails drives the phase transition, we examine four types of composites with varying tail density. Ordinarily, composites consist of surfactants with one 20-carbon tail and one positively charged ammonium headgroup. Tail density is varied by replacing a small amount (0-16%) of these single-tail, single-head surfactants with single-tail, double-head 'gemini' surfactants. A greater head--tail ratio indeed produces different results, causing the phase transition to occur at higher temperatures. Using simple geometric models to gain better understanding of our experimental results, we find that, while both unfavorable curvature and limited volume may exist for the surfactants in these composites, the constrained curvature appears to be the dominant effect in driving structural rearrangement.