Spatially Resolved Confocal Resonant Raman Microscopic Analysis of Anode‐Grown Geobacter sulfurreducens Biofilms

When grown on the surface of an anode electrode, Geobacter sulfurreducens forms a multi‐cell thick biofilm in which all cells appear to couple the oxidation of acetate with electron transport to the anode, which serves as the terminal metabolic electron acceptor. Just how electrons are transported through such a biofilm from cells to the underlying anode surface over distances that can exceed 20 microns remains unresolved. Current evidence suggests it may occur by electron hopping through a proposed network of redox cofactors composed of immobile outer membrane and/or extracellular multi‐heme c‐type cytochromes. In the present work, we perform a spatially resolved confocal resonant Raman (CRR) microscopic analysis to investigate anode‐grown Geobacter biofilms. The results confirm the presence of an intra‐biofilm redox gradient whereby the probability that a heme is in the reduced state increases with increasing distance from the anode surface. Such a gradient is required to drive electron transport toward the anode surface by electron hopping via cytochromes. The results also indicate that at open circuit, when electrons are expected to accumulate in redox cofactors involved in electron transport due to the inability of the anode to accept electrons, nearly all c‐type cytochrome hemes detected in the biofilm are oxidized. The same outcome occurs when a comparable potential to that measured at open circuit (?0.30 V vs. SHE) is applied to the anode, whereas nearly all hemes are reduced when an exceedingly negative potential (?0.50 V vs. SHE) is applied to the anode. These results suggest that nearly all c‐type cytochrome hemes detected in the biofilm can be electrochemically accessed by the electrode, but most have oxidation potentials too negative to transport electrons originating from acetate metabolism. The results also reveal a lateral heterogeneity (x–y dimensions) in the type of c‐type cytochromes within the biofilm that may affect electron transport to the electrode.     

Optimization of Biocompatibility for a Hydrophilic Biological Molecule Encapsulation System

Despite considerable advances in recent years, challenges in delivery and storage of biological drugs persist and may delay or prohibit their clinical application. Though nanoparticle-based approaches for small molecule drug encapsulation are mature, encapsulation of proteins remains problematic due to destabilization of the protein. Reverse micelles composed of decylmonoacyl glycerol (10MAG) and lauryldimethylamino-N-oxide (LDAO) in low-viscosity alkanes have been shown to preserve the structure and stability of a wide range of biological macromolecules. Here, we present a first step on developing this system as a future platform for storage and delivery of biological drugs by replacing the non-biocompatible alkane solvent with solvents currently used in small molecule delivery systems. Using a novel screening approach, we performed a comprehensive evaluation of the 10MAG/LDAO system using two preparation methods across seven biocompatible solvents with analysis of toxicity and encapsulation efficiency for each solvent. By using an inexpensive hydrophilic small molecule to test a wide range of conditions, we identify optimal solvent properties for further development. We validate the predictions from this screen with preliminary protein encapsulation tests. The insight provided lays the foundation for further development of this system toward long-term room-temperature storage of biologics or toward water-in-oil-in-water biologic delivery systems.     

Versatile post-functionalisation strategy for the formation of modular organic–inorganic polyoxometalate hybrids

Hybrid structures incorporating different organic and inorganic constituents are emerging as a very promising class of materials since they synergistically combine the complementary and diverse properties of the individual components. Hybrid materials based on polyoxometalate clusters (POMs) are particularly interesting due to their versatile catalytic, redox, electronic, and magnetic properties, yet the controlled incorporation of different clusters into a hybrid structure is challenging and has been scarcely reported. Herein we propose a novel and general strategy for combining multiple types of metal-oxo clusters in a single hybrid molecule. Two novel hybrid POM structures (HPOMs) bis-functionalised with dipentaerythritol (R–POM₁–R; R = (OCH₂)₃CCH₂OCH₂C(CH₂OH)) were synthesised as building-blocks for the formation of heterometallic hybrid triads (POM₂–R–POM₁–R–POM₂). Such a modular approach resulted in the formation of four novel heterometallic hybrids combing the Lindqvist {V₆}, Anderson–Evans {XMo₆} (X = Cr or Al) and trisubstituted Wells–Dawson {P₂V₃W₁₅} POM structures. Their formation was confirmed by multinuclear Nuclear Magnetic Resonance (NMR), infrared (IR) and UV-Vis spectroscopy, as well as Mass Spectrometry, Diffusion Ordered Spectroscopy (DOSY) and elemental analysis. The thermal stability of the hybrids was also examined by Thermogravimetric Analysis (TGA), which showed that the HPOM triads exhibit higher thermal stability than comparable hybrid structures containing only one type of POM. The one-pot synthesis of these novel compounds was achieved in high yields in aqueous and organic media under simple reflux conditions, without the need of any additives, and could be translated to create other hybrid materials based on a variety of metal-oxo cluster building-blocks.

A versatile modular approach has been developed for incorporating different metal-oxo nanoclusters with characteristic structures into a single hybrid molecule by covalently linking them with polyol ligands.     

Maximum confidence quantum measurements

We consider the problem of discriminating between states of a specified set with maximum confidence. For a set of linearly independent states unambiguous discrimination is possible if we allow for the possibility of an inconclusive result. For linearly dependent sets an analogous measurement is one which allows us to be as confident as possible that when a given state is identified on the basis of the measurement result, it is indeed the correct state.     

A comparative study of myo-inositol quantification using LCmodel at 1.5 T and 3.0 T with 3 D 1H proton spectroscopic imaging of the human brain

Myo-inositol is a strongly coupled system and resonates at four chemical shift positions. At 1.5 T, only the singlet component at 3.57 ppm is detected. However, at 3 T this resonance is resolved into its components at 3.55 ppm and 3.61 ppm. Due to the increased spectral resolution and signal-to-noise ratio, it is anticipated that the quantification of myo-inositol should improve at 3 T. Using data from normal controls and the LCmodel quantification procedure, we found that the quantification precision, reproducibility and detection sensitivity of myo-inositol is significantly better at 3 T relative to 1.5 T.     

Exploring the state of science stereotypes: Systematic review and meta-analysis of the Draw-A-Scientist Checklist

This systematic review and meta-analysis examined recent articles that have used the 1995 Draw-A-Scientist Checklist (DAST-C). This study was focused on the current state of students' stereotypes of scientists and the appropriateness of the DAST-C as a tool to assess these perceptions. Articles included in the review were published between 2003 and 2018, resulting in n = 30 studies. Mean results across studies are presented to describe current stereotypes of scientists, and the current format of the DAST-C is evaluated. Findings suggest that students' perceptions of scientists have largely remained consistent across time: scientists are still perceived as Caucasian, middle-aged or elderly males who wear lab coats and work indoors. However, while the DAST-C is a generally appropriate measure to assess students' perceptions of scientists, recommended revisions to the DAST-C could assist in capturing more modern scientist stereotypes and culturally bound perceptions of scientists.     

An interpretation of structural sorting diagrams for AB type compounds using molecular orbital ideas

The factors governing the structure adopted by a particular AB compound are investigated by deriving two parameters reflecting aspects of the interaction between A and B, using simple molecular orbital ideas, which can be quantified by use of atomic parameters derived from pseudopotential theory. A plot of the values of these two parameters, for a large database of compounds, produces a remarkable topological clustering of AB compounds with the same structure. This structural sorting can also be effected for nonoctet AB compounds if the number of electrons is taken into account. These parameters are related to other indices, R_σ, R_π, previously used by Bloch, Zunger, Phillips et al. to construct structural sorting diagrams. Hence we find a justification for the success of such displays, and shed light on the reasons underpinning structural preference, in terms of the number of valence electrons, and the relative positions of the energy levels of the constituent atoms. There appear to be strong similarities between the electronic reasons behind atomic site preferences in molecules and this site preference or coordination number problem in solids.     

The minimum span of L(2,1)-labelings of certain generalized Petersen graphs

In the classical channel assignment problem, transmitters that are sufficiently close together are assigned transmission frequencies that differ by prescribed amounts, with the goal of minimizing the span of frequencies required. This problem can be modeled through the use of an L(2,1)-labeling, which is a function f from the vertex set of a graph G to the non-negative integers such that |f(x)-f(y)|? 2 if xand y are adjacent vertices and |f(x)-f(y)|?1 if xand y are at distance two. The goal is to determine the λ-number of G, which is defined as the minimum span over all L(2,1)-labelings of G, or equivalently, the smallest number k such that G has an L(2,1)-labeling using integers from {0,1,…,k}. Recent work has focused on determining the λ-number of generalized Petersen graphs (GPGs) of order n. This paper provides exact values for the λ-numbers of GPGs of orders 5, 7, and 8, closing all remaining open cases for orders at most 8. It is also shown that there are no GPGs of order 4, 5, 8, or 11 with λ-number exactly equal to the known lower bound of 5, however, a construction is provided to obtain examples of GPGs with λ-number 5 for all other orders. This paper also provides an upper bound for the number of distinct isomorphism classes for GPGs of any given order. Finally, the exact values for the λ-number of n-stars, a subclass of the GPGs inspired by the classical Petersen graph, are also determined. These generalized stars have a useful representation on Möebius strips, which is fundamental in verifying our results.     

Organization in lipid membranes containing cholesterol

A fundamental attribute of raft formation in cell membranes is lateral separation of lipids into coexisting liquid phases. Using fluorescence microscopy, we observe spontaneous lateral separation in free-floating giant unilamellar vesicles. We record coexisting liquid domains over a range of composition and temperature significantly wider than previously reported. Furthermore, we establish correlations between miscibility in bilayers and in monolayers. For example, the same lipid mixtures that produce liquid domains in bilayer membranes produce two upper miscibility critical points in the phase diagrams of monolayers.