On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

Application of solid phase microextraction in the determination of paralytic shellfish poisoning toxins

A SPME-HPLC-post-column fluorescent derivatization method for the direct determination of saxitoxin (STX), the most potent paralytic shellfish poisoning (PSP) toxin, in water has been developed. Commercially available SPME devices with 50 microm Carbowax templated resin (CW/TPR) coating was found to be able to pre-concentrate STX from aqueous media. A special pre-conditioning treatment of soaking the SPME coating in 0.1 M NaOH solution significantly improved the extraction efficiency. The optimal pH for the SPME process is 8.1 and the equilibration time is 40 min. The partition coefficient, K, of the distribution of STX between the SPME coating and the aqueous media was measured to be 2.99 +/- 0.04 x 10(3). Extracted toxin on the SPME stationary phase was difficult to be desorbed by the HPLC mobile phase under dynamic desorption mode. A static ion-pairing desorption technique using a desorption solvent mixture of 20 mM sodium 1-heptanesulfonate in 30% aqueous acetonitrile acidified with 50 mM sulfuric acid was developed to overcome this problem. The method detection limit and repeatability achieved by this SPME-HPLC method were 0.11 ng ml(-1) and 3.7%, respectively, with a sample volume of just 5 ml of water. This analytical method is adequate for the monitoring of the PSP toxin in fresh/drinking waters. However, serious interference was observed when this technique was applied to saline water samples. This is probably due to competition of sodium ions with the cationic STX for absorption into the SPME stationary phase.     

The alpha-helix folds more rapidly at the C-terminus than at the N-terminus

The helix-coil dynamics of different sections of an alpha-helical model peptide were observed separately by nanosecond temperature jump experiments with IR detection on a series of isotopically labeled peptides. The results show that the helix-coil dynamics of the alpha-helical C-terminus are faster than those of the N-terminus.     

Contact angle hysteresis, adhesion, and marine biofouling

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.     

Extremal k *-Cycle Resonant Hexagonal Chains

Denote by ^* _n the set of all k ^*-cycle resonant hexagonal chains with n hexagons. For any B _n ^* _n , let m(B _n ) and i(B _n ) be the numbers of matchings (=the Hosoya index) and the number of independent sets (=the Merrifield–Simmons index) of B _n , respectively. In this paper, we give a characterization of the k ^*-cycle resonant hexagonal chains, and show that for any B _n ^* _n , m(H _n )m(B _n ) and i(H _n )i(B _n ), where H _n is the helicene chain. Moreover, equalities hold only if B _n =H _n .     

Characterisation and proposed origin of mass spectrometric ions observed 30 Th above the ionised molecules of per-O-methylated carbohydrates

Derivatisation of carbohydrates by permethylation significantly improves the mass spectrometric intensity of carbohydrate-derived ions and allows more readily interpretable fragmentation; in addition, samples are conveniently separated from salts, and larger oligosaccharides are more readily ionised. It has previously been recognised that, in the mass spectra of permethylated carbohydrates, a series of ions indicating species 30 Da larger than the fully methylated carbohydrate molecules are also observed. These species have not been characterised in the literature despite their apparently ubiquitous occurrence in the mass spectra of permethylated carbohydrates. Tandem mass spectrometry (MS/MS) experiments were performed on permethylated carbohydrates and reduced permethylated carbohydrates that exhibit the artefact, demonstrating that the artefact is not reducing terminal specific, and that the artefact can be introduced at any hydroxyl residue. It was further demonstrated through the use of different alkylation reagents that the origin of this artefact group is the alkylating reagent itself. It is proposed that side reactions that occur between the permethylation reagents allow the production of small amounts of iodomethyl methyl ether. This reagent can then compete with methyl iodide for reaction with the carbohydrate -OH groups. The result is partial incorporation of a methoxymethyl moiety instead of a methyl group, detected as '+30' artefact ions.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2004, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC) - a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Experimental studies of the dynamics of the bond-forming reactions of CF2(2+) with H2O using position-sensitive coincidence spectroscopy

The dynamics of the product channels forming OCF(+)+H(+)+HF and HCF(2) (+)+H(+)+O following the collisions of CF(2) (2+) with H(2)O have been investigated with a new position-sensitive coincidence experiment at a center-of-mass collision energy of 5.6 eV. The results show the formation of OCF(+) occurs via the formation of a doubly charged collision complex [H(2)O-CF(2)](2+) which subsequently undergoes a charge separating dissociation to form H(+) and HOCF(2) (+). The HOCF(2) (+) monocation subsequently fragments to form HF+OCF(+). The lifetimes of the collision complex and the HOCF(2) (+) ion are at least of the order of their rotational period. The kinetic energy release in this reaction indicates that it involves the ground state of CF(2) (2+) and forms the ground electronic states of OCF(+) and HF. The mechanism for forming HCF(2) (+) involves the direct and rapid abstraction of a hydride ion from H(2)O by CF(2) (2+). The resulting OH(+) ion subsequently fragments to H(+)+O, on a time scale at least comparable with its rotational period.     

Dithiolene transfer from nickel to a dimolybdenum centre: the first dithiolene alkyne complex

Transfer of dithiolene ligands from [Ni(S₂C₂Ph₂)₂] to the dimolybdenum complex [Mo₂(μ-C₂R₂)(CO)₄Cp₂] (R=CO₂Me, Cp=η-C₅H₅) affords the first example of a dithiolene alkyne complex, [Mo₂(μ-C₂R₂)(μ-S₂C₂Ph₂)₂Cp₂], together with [Mo₂(μ-SCRCR)(μ-SCPhCPh)Cp₂] in which sulfur transfer from dithiolene to alkyne has occurred.     

Interference between the hydrogen bonds to the two rings of nicotine

The biochemical transport and binding of nicotine depends on the hydrogen bonding between water and binding site residues to the pyridine ring and the protonated pyrrolidinium ring. To test the independence of these two moderately separated hydrogen-bonding sites, we have calculated the structures of clusters of protonated nicotine with water and a bicarbonate anion, benzene, indole, or a second water molecule. Unprotonated nicotine-water clusters have also been studied for contrast. The potential energy surfaces are first explored with an intermolecular anisotropic atom-atom model potential. Full geometry optimizations are then carried out using density functional theory to include nonadditive terms in the interaction energies. The presence of the charge on the pyrrolidine nitrogen removes the conventional hydrogen-bonding site on the pyridine ring. The hydrogen-bond ability of this site is nearly recovered when the protonated pyrrolidinium ring is bound to a bicarbonate anion, whereas its interaction with benzene shows a much smaller effect. Indole appears to partially restore the hydrogen-bond ability of the pyridine nitrogen, although indole and benzene both pi-bond to the pyrrolidinium ring. A second hydrogen-bonding water produces a significant conformational distortion of the nicotine. This demonstrates the limitations of the conventional qualitative predictions of hydrogen bonding based on the independence of molecular fragments. It also provides benchmarks for the development of atomistic modeling of biochemical systems.