A new, iterative strategy for the synthesis of unsymmetrical polyynes: application to the total synthesis of 15,16-dihydrominquartynoic acid

[reaction: see text] A new iterative strategy for the synthesis of unsymmetrically substituted polyynes has been developed. The starting bromoalkyne is homologated by one acetylene unit through palladium-catalyzed cross-coupling with a TIPS-protected terminal acetylene and a subsequent in situ one-pot AgF-mediated desilylative bromination. The utility of this new synthetic method is demonstrated by its application to the total synthesis of (S)-(E)-15,16-dihydrominquartynoic acid.     

Sensitive Determination of Felodipine in Human and Dog Plasma by Use of Liquid–Liquid Extraction and LC–ESI–MS–MS

Summary A sensitive and selective liquid chromatographic method coupled with electrospray ionization tandem mass spectrometry (LC–ESI–MS–MS) has been developed for quantification of felodipine in human and dog plasma. Compounds were separated on a 2.0 mm × 150 mm, 5.0 m particle, C₈ column with 1 m m ammonium acetate–acetonitrile, 20:80, pH 6.0, as mobile phase at a flow rate of 200 L min^–1. Nifedipine was used as internal standard. Plasma samples were extracted with diethyl ether, the centrifuged upper layer was evaporated, the residue was reconstituted with mobile phase, and the reconstituted samples were injected. The analytical column lasted for at least 1000 injections. By use of multiple reaction monitoring (MRM) mode in MS–MS felodipine and nifedipine were detected without severe interference from the human or dog plasma matrix. Felodipine produced a protonated precursor ion ([M + H]⁺) at m/z 384 and a corresponding product ion at m/z 338. And internal standard (nifedipine) produced a protonated precursor ion ([M + H]⁺) at m/z 347 and a corresponding product ion at m/z 315. Detection of felodipine in human and dog plasma was accurate and precise, with a limit of quantification of 0.05 ng mL^–1. The method has been successfully applied to preliminary pharmacokinetic study of felodipine in human and dog plasma.     

Structural determination of hexadecanoic lysophosphatidylcholine regioisomers by fast atom bombardment tandem mass spectrometry

The structural determination of sn-1 and sn-2 hexadecanoic lysophosphatidylcholine (LPC) regioisomers was carried out using fast atom bombardment tandem mass spectrometry (FAB-MS/MS). The collision-induced dissociation (CID) of protonated and sodiated molecules produced diverse product ions due mainly to charge remote fragmentations. Based on the information obtained from the CID spectra of protonated and sodiated molecules, sn-1 and sn-2 hexadecanoic LPC isomers could be discriminated. Especially, the abundance ratio of the diagnostic ion pair [m/z 224/226] in the CID spectra of [M + H](+) ions was shown to be greatly different. Moreover, the CID-MS/MS spectra of sodium-adducted molecules for hexadecanoic LPC isomers showed characteristic product ions such as [M + Na - 103](+), [M + Na - 85](+), and [M + Na - 59](+), by which their regio-specificity can be differentiated.     

Lead-selective poly(vinyl chloride) membrane electrodes based on acyclic dibenzopolyether diamides

Lipophilic acyclic dibenzopolyether diamides, 12 kinds, have been designed to prepare solvent polymeric membrane ion-selective electrodes (ISEs) for Pb(2+). The ionophores include 1,5-bis[2-(N,N-dialkylcarbamoylmethoxy)phenoxy]-3-oxapentanes1-4, 1,5-bis[2-(N,N-dialkylcarbamoylpentadecyloxy)phenoxy]-3-oxapentanes 5-8, and 1,2-bis[2-(2'-N,N-dialkylcarbamoylpentadecyloxy)phenoxy]ethanes 9-12. Linear response concentration range of the ISE based on 9 is 3 x 10(-2) - 1 x 10(-6) M of Pb(2+) (average slope = 28.5 mV decade(-1)). Potentiometric selectivities of the ISEs based on 1-12 for Pb(2+) over other heavy metal cations, alkali metal cations, and alkaline earth metal cations have been assessed. These ISEs exhibit remarkably high selectivities for Pb(2+) relative to heavy metal cations, such as Cu(2+), Fe(2+), and Ni(2+), the selectivity coefficients (K(Pot)(Pb,Cu)) being 5 x 10(-5) - 6 x 10(-5) for 1-4 and ca. 6 x 10(-4) for 9. For the Pb(2+) selectivities over alkali metal cations, such as Na(+) and K(+), 9 which has an ethylene glycol spacer and a N,N-diethyl group is superior to other dibenzopolyether diamide ionophores 1-8 and 10-12.     

Equilibrium dynamics of the toy model of dense fluid: the infinite damping limit

We investigate the equilibrium dynamics of our recently proposed toy model of dense fluid in the infinite damping limit. Contrary to naive expectation, the correlators involving the velocity-like variables do not quickly relax away. Instead, after a very fast transient relaxation, they exhibit rather slow relaxations due to the coupling to the density-like variable. Hence, the so-called "hopping" processes are not suppressed even in the large damping limit. These hopping processes can only be controlled by tuning the parameter delta, which is the ratio of the numbers of the components of the velocity-like and the density-like variables in the model. We analytically prove that there must exist an ergodic-to-nonergodic phase transition for delta such that 0 < delta < 1. The slow dynamics and the dynamic transition in the model are distinct from those in the idealized mode coupling theory.     

Microwave synthesis,characterization and catalytic properties of titanium-incorporated ZSM-5 zeolite

Titanium-incorporated ZSM-5 zeolites (Si/Al = 50–200 and Si/Ti = 70) were successfully synthesized in a one-step sol-gel process under microwave irradiation. The characteristics of Ti-ZSM-5 zeolites were investigated using X-ray power diffraction, UV/Vis-DRS, FT-IR spectroscopy and solid-state ²⁷Al-NMR to monitor the physico-chemical properties. Simultaneously, the acidic properties were characterized by the NH₃-TPD profile. The characterization results revealed that the Ti⁴⁺ and Al³⁺ ions were well incorporated into the framework of Ti-ZSM-5 zeolite. The prepared zeolite was moderately active but selective in the dehydration of methanol to dimethyl ether.     

Separating Ag, B, Cd, Dy, Eu, and Sm in a Gd matrix using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester extraction chromatography for ICP-AES analysis

The separation procedure for Ag, B, Cd, Dy, Eu and Sm as impurities in Gd matrix using ICP-AES technique with an extraction chromatographic column has been developed. The spectral interference of the Gd matrix on the elements was eliminated using a chromatography technique with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) as the mobile phase and XAD-16 resin as the stationary phase. Ag⁺, B₄O₇²⁻, and Cd²⁺ were eluted with 0.1 M HNO₃, while rare earth ions were not. The best eluent for separating Eu and Sm in the Gd matrix was 0.3 M HNO₃. The limit of quantitation for these elements was 0.6-3.0 ng mL⁻¹. The recovery of Ag, B, and Cd was 90-104% using 0.1 M HNO₃ as the eluent, while that of Eu, Gd, and Sm ranged from 100 to 102% with 0.3 M HNO₃. Dy was recovered quantitatively with 4 M HNO₃. The relative standard deviation of the methods for a set of three replicates was between 1.0 and 15.4% for the synthetic and standard Gd solutions. The proposed separation procedure was used to measure Ag, B, Cd, Dy, Eu, and Sm in a standard Gd solution.     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

Fabrication of hollow palladium spheres and their successful application to the recyclable heterogeneous catalyst for suzuki coupling reactions

Novel palladium hollow spheres were synthesized using silica spheres as a template, and they were successfully applied as recyclable heterogeneous catalysts for Suzuki cross coupling reactions.     

Synthesis of pyrimido[4,5-e][1,4]oxazepin-5-ones

Eighteen novel pyrimido[4,5-e][1,4]oxazepin-5-ones were prepared directly via the reaction of either ethyl 4-chloro-2-phenyl-5-pyrimidinecarboxylate (Ia) or ethyl 4-chloro-2-m-chlorophenyl-5-pyrimidinecarboxylate (Ib) with a variety of substituted 2-(alkylamino)ethanols. A typical example was the preparation of 8,9-dihydro-9-methyl-2-phenylpyrimido[4,5-e][1,4]-oxazepin-5(7H)-one (IIa) from the reaction of Ia with 2-(methylamino)ethanol. Hydrolytic cleavage of the lactone ring in IIa with sodium hydroxide solution, followed by acidification with hydrochloric acid afforded 4-[(2-hydroxyethyl)methylamino]-2-phenyl-5-pyrimidinecarboxylic acid (IV). Reactions of IIa with concentrated ammonium hydroxide or hydrazine also caused cleavage of the lactone ring, giving the corresponding amide (V) or hydrazide (VI), respectively. Structural assignments were supported by infrared and nuclear magnetic resonance spectra.