Water 1H spin-lattice relaxation as a fingerprint of porous media

The 1H spin-lattice relaxation curves of water in samples of natural porous media can be thought of as "fingerprints" of the porous samples. Also the whole of traditional petrophysical properties (permeability, irreducible water saturation, etc.) can be thought of as "fingerprints" of the porous samples. The characteristics of the pore space determine on one hand the relaxation curve shape, and on the other the petrophysical properties. The understanding of this correspondence can contribute to a better definition of the concept of the architecture of a porous medium. At this purpose we have obtained 1H spin-lattice relaxation curves from a collection of standard sandstone cores of known petrophysical properties and characterized by the same surface properties. The results corroborate the idea that the structure of relaxation curves contains information on the distance scale and on the architecture of the pore space, even if it is difficult to extract it without ambiguities. Different methods of curve fitting were performed and compared with the aim of getting the maximum information from the relaxation curves. Several aspects of this kind of investigation indicate the analogies between 1H response of water confined in porous media and in biological tissues.     

Electronic surface states on Pd(110): Theory and comparison with experiment

A relativistic Green function formalism has been applied to calculate layer-projected densities of states on Pd(110). In particular, we obtained unoccupied surface states and their dispersion relations along two directions in the surface Brillouin zone. Good agreement with recent inverse photoemission data is reached by using an energy-dependent dynamical surface potential barrier, which is based on a simple electron-plasmon interaction model, instead of a static surface barrier.     

Erbium:YAG (2.94 mum) laser effects on dental tissues

Past trials with soft and calcified tissues have demonstrated that long pulse train (2.5 mus) Er:YAG (2.94 mum) laser may be used to ablate tooth structure of human teeth. Determination of physical and thermal damage to surrounding tissue during removal of enamel and dentin is a primary objective of this study. Extracted human teeth with thermal probes imbedded in the pulp chambers were submitted to cavity preparation using an Erbium YAG laser with water mist. Wavelength selection as well as use of a water mist during the procedure resulted in efficient tissue removal without significant surrounding damage. Ground sections and SEM sections of teeth showed little or no melting or ash formation in adjacent dentin and enamel and no visible change in the pulp chamber. The surfaces produced by laser ablation were rough and irregular with craters and grooves. Average temperature change in the pulp chamber monitored during tooth preparation was 2.2 degrees Centigrade. These findings suggest that constantly available water aids vaporization and microexplosions, increasing the efficiency of tooth structure removal, and aids in cooling of the tooth structures. The long pulse Er:YAG (2.94 mum) laser may be an effective method for tooth reduction applications when used with a water mist.     

Positron annihilation studies on the electronic structure of Pd−Ag−H system

Angular Correlation of Annihilation Radiation (ACAR) is shown to be useful to examine the electronic structure of -phase Pd_1–y Ag _y H _x system. Hydrogen absorption by Pd_1–y Ag _y alloys results in the increase of both nearly free andd-localized electron numbers in compliance with the KKR-CPA calculation outcomes. The investigation of -phase systems, PdH _x hydrides as well as Pd_1–y Ag _y H _x materials, failed because of a high concentration of lattice defects.     

Comments on "Earphones in Audiometry" [Zwislocki et al., J. Acoust. Soc. Am. 83, 1688-1689 (1988)

The Zwislocki et al. ["Earphones in Audiometry," J. Acoust. Soc. Am. 83, 1688-1689 (1988)] Letter to the Editor states that insert earphones have some unresolved technical problems, such as limited frequency response, limited dynamic range and power handling capability, intersubject variability, and hygiene safety. In evaluating circumaural earphones, Zwislocki et al. say that the lack of a standard coupler disqualifies them for audiometry. Since this letter carries the weight of a CHABA committee recommendation, these issues are commented on herein. Section I was written primarily by Mead Killion and Sec. II primarily by Edgar Villchur. For brevity throughout, the authors of the Zwislocki et al. letter will be referred to as "the authors."     

Crystal structures of dimethylsuccinate and dimethyloxalate: Carbonyl group orientation for C13 chemical shielding tensor studies

The crystal structures of dimethylsuccinate (DMS) and dimethyloxalate (DMO) have been determined to facilitate the determination of the C-13 chemical shielding tensors of the carbonyl carbon in esters. Crystals of DMS are monoclinic, space groupC2/c,Z=4,a=13.154(4),b=6.156(1),c=9.363(4)Å,=98.53(3)°. The structure was solved by direct methods and refined by leastsquares procedures to giveR=0.071 for 932 observed data. Crystals of DMO are monoclinic space group,P2₁/n,Z=2, witha=3.891(1),b=11.879(2),c=6.213(2) Å,=103.32(2)°. The structure is the same (within experimental error) as that reported by Dougill and Jeffrey (1953) and refined to giveR=0.074 for 395 observed data.     

Comparison between structural and residual error formulations of an optimum design mechanism problem

Summary The model formulation of the objective function is one of the most important steps for solving an optimization problem. Generally, the objective function of an optimal design mechanism problem can be mathematically formulated either with structural or residual errors. In this paper we have conducted some comparisons between the results obtained by the structural and residual error formulations utilized in solving the optimum design of a four-bar linkage. The optimization problem is defined as a nonlinear least-squares problem. The damped Gauss-Newton algorithm is utilized for computing the solution, which ensures a local convergence for almost all nonlinear least-squares problems.

---

Sommario La formulazione matematica della funzione obiettivo è uno degli aspetti più delicati nella soluzione di un problema di ottimizzazione. Generalmente la funzione obiettivo di un problema di progettazione ottima di un meccanismo può essere formulata sia mediante l'errore strutturale che residuo. In questo lavoro sono stati eseguiti dei confronti tra i risultati ottenuti mediante le due precedenti formulazioni, in riferimento al problema della progettazione ottima di un quadrilatero articolato. Il problema di ottimizzazione viene definito come un problema nonlineare ai minimi quadrati la cui soluzione numerica è ottenuta mediante l'algoritmo damped di Gauss-Newton.

---

---

This paper was partially discussed at theII Congegno di Meccanica Computazionale, Roma, 1987.     

Reducible Dupin submanifolds

Pinkall's standard constructions for obtaining a Dupin hypersurface W in ^N from a Dupin hypersurface M in ⁿ , N>n, are studied in the context of Lie sphere geometry. It is shown that a compact Dupin hypersurface W in ^N with g distinct principal curvatures at each point is reducible to a compact Dupin hypersurface M in ⁿ if and only if g=2.This research was supported by NSF Grant No. DMS 87-06015.     

Relaxation methods in control theory

Two different relaxed problems associated with a problem of optimal control theory, governed by an ODE, are considered: the first is obtained by Young's methods and the second by semicontinuity arguments. A formula which relates the two relaxed functionals to each other is given.