A simple homemade spectrophotometer

A simple portable spectrophotometer was constructed and used to perform analytical experiments. The developed model uses available tools and materials such as light emitting diode lamps, compact discs, plastic and cardboard boxes and a cell phone camera to build a design that illustrates the major components of spectrophotometers. The spectra of serial concentrations of KMnO₄ (50?600 μM) were recorded and the values of absorbance were extracted at λ_max to build the calibration curve. A linear relationship between the concentration and absorbance was obtained with the coefficient of determination 0.994. The model was also utilized to study the spectra of KMnO₄, phenolphthalein and bromothymol blue in comparison with a Shimadzu UV-1800 spectrophotometer as a reference instrument. In spite of the differences in the observed spectra, the recorded λ_max were almost identical to those measured by the developed model. The model was successfully used to determine the concentration of sodium alendronate through ligand-exchange complexation with ferric salicylate.     

Different binders in FCC catalyst preparation: impact on catalytic performance in VGO cracking

Research on Chemical Intermediates - In the present study, four different binders including two synthesized alumina-silica sol and two commercially available binders comprising LUDOX AS-30...     

Chemically modified multiwalled carbon nanotubes as efficient and selective sorbent for separation and preconcentration of trace amount of Co(II), Cd(II), Pb(II), and Pd(II)

Multi-walled carbon nanotubes (MWCNTs) were chemically functionalized by glutaric dihydrazide (GDH) and characterized with FT-IR technique. This new sorbent was used for enrichment and preconcentration of Co(II), Cd(II), Pb(II), and Pd(II) ions. The adsorption was achieved quantitatively on MWCNTs at pH 4.0, and then the retained metal ions on the adsorbent were eluted with 1.5 mol L^?1 HNO₃. The effects of analytical parameters including pH of the solution, eluent type, sample volume, and matrix ions were investigated for optimization of the presented procedure. The adsorption capacity of the adsorbent at optimum conditions was found to be 33.6, 29.2, 22.1, and 36.0 mg g^?1 for Co(II), Cd(II), Pb(II), and Pd(II), respectively. The LOD values of the method were 0.16, 0.19, 0.17, and 0.12 ng mL^?1 (3Sb, n = 10) for Co(II), Cd(II), Pb(II), and Pd(II), respectively. The RSDs values of the method were 0.75, 0.85, 1.16, and 1.30 ng mL^?1 for Co(II), Cd(II), Pb(II), and Pd(II), respectively. The method was applied for the determination of analytes in soil, well water, and wastewater samples with satisfactory results.     

Synthesis of Azobenzene Dyes Mediated by CotA Laccase

An eco‐friendly protocol for the synthesis of azobenzene dyes by oxidative coupling of primary aromatic amines is reported. As efficient biocatalytic systems, CotA laccase and CotA laccase/ABTS (2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid)) enable the oxidation of various substituted anilines, in aqueous medium, ambient atmosphere and under mild reaction conditions of pH and temperature. A series of azobenzene dyes were prepared in good to excellent yields in an one‐pot reaction. A mechanistic proposal for the formation of the azo derivatives is presented. Our strategy offers an alternative approach for the direct synthesis of azobenzene dyes, avoiding the harsh conditions generally required for most of the traditional synthetic methods.     

Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Spectroscopic Ellipsometry Characterisation and Estimation of the Hamaker Constant of Cellulose

Calculations of Hamaker constants using Lifshitz theory require the availability of accurate dielectric data, especially in the visible-ultraviolet region. We present spectroscopic ellipsometry data on well-defined cellulose films of a limited thickness range (100–140 layers) deposited on an oxidised and hydrophobised silicon substrate. The spectral data, representing measurements from a perpendicular orientation to the fibre deposition direction, was used for estimates of the necessary spectral parameters, i.e. the oscillator strengths and characteristic frequencies in the UV-range. Our calculations show that cellulose has a relatively low Hamaker constant in air (58 zJ) and water (8.0 zJ). The implications for the surface energy estimates of cellulose and colloidal interactions between cellulose and various types of fillers and coating colours are indicated.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

Electrochemical Oxidation of Lithium Carbonate Generates Singlet Oxygen

Solid alkali metal carbonates are universal passivation layer components of intercalation battery materials and common side products in metal‐O₂ batteries, and are believed to form and decompose reversibly in metal‐O₂/CO₂ cells. In these cathodes, Li₂CO₃ decomposes to CO₂ when exposed to potentials above 3.8 V vs. Li/Li⁺. However, O₂ evolution, as would be expected according to the decomposition reaction 2 Li₂CO₃→4 Li⁺+4 e^?+2 CO₂+O₂, is not detected. O atoms are thus unaccounted for, which was previously ascribed to unidentified parasitic reactions. Here, we show that highly reactive singlet oxygen (¹O₂) forms upon oxidizing Li₂CO₃ in an aprotic electrolyte and therefore does not evolve as O₂. These results have substantial implications for the long‐term cyclability of batteries: they underpin the importance of avoiding ¹O₂ in metal‐O₂ batteries, question the possibility of a reversible metal‐O₂/CO₂ battery based on a carbonate discharge product, and help explain the interfacial reactivity of transition‐metal cathodes with residual Li₂CO₃.     

An efficient synthesis and cytotoxic activity of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole obtained using a magnetically recyclable Fe3O4 nanocatalyst‐mediated white tea extract

A simple and efficient procedure has been developed for the synthesis of biologically relevant 2‐substituted benzimidazoles through a one‐pot condensation of o‐phenylenediamines with aryl aldehydes catalysed by iron oxide magnetic nanoparticles (Fe₃O₄ MNPs) in short reaction times with excellent yields. In the present study, Fe₃O₄ MNPs synthesized in a green manner using aqueous extract of white tea (Camelia sinensis) (Wt‐Fe₃O₄ MNPs) were applied as a magnetically separable heterogeneous nanocatalyst to synthesize 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole which has potential application in pharmacology and biological systems. Fourier transform infrared and NMR spectroscopies were used to characterize the 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole. In vitro cytotoxicity studies on MOLT‐4 cells showed a dose‐dependent toxicity with non‐toxic effect of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole, up to a concentration of 0.147 µM. The green synthesized Wt‐Fe₃O₄ MNPs as recyclable nanocatalyst could be used for further research on the synthesis of therapeutic materials, particularly in nanomedicine, to assist in the treatment of cancer.