Trace elements in a profile of the unsaturated zone of the São Paulo Basin

This study comprises Tertiary sediments (clays, silts, and fine clayey sands) from the unsaturated zone of the Experimental Station in the University of São Paulo, taken from a nine meters depth profile; ten samples were separated in bulk and <53 m fractions. Chemical composition was determined by INAA to ascertain the distribution of trace elements throughout the sediment deposition, and to establish the background parameters, useful for mobilization studies of such elements after industrial waste disposal.     

Spectrophotometric flow injection determination of total phosphorus in beer using on-line UV/thermal induced digestion

A flow injection system for the automatic determination of total phosphorus in beer is described. The developed manifold uses a two-stage photooxidation/thermal digestion procedure together with oxidizing and hydrolyzing reagents to convert all forms of phosphorus compounds to orthophosphate. Polyphosphates are hydrolyzed by acid and heat, and organo-phosphates are digested by UV-catalyzed peroxodisulfate oxidation. The orthophosphate formed is then spectrophotometrically determined by the phosphomolybdenum blue reaction, using stannous chloride as reducing agent. The results obtained for a set of 19 beer samples (with concentrations from 120 to 735 mg P/L) were in good agreement with the reference method, the maximum relative deviation found being 4.7%. Relative standard deviations for ten consecutive determinations were lower than 1.5%, and a detection limit of 1 mg P/L was achieved.     

Natural radionuclide-free phosphoric acid production

High-uranium phosphate rock from Itataia, Brazil, was milled for wet-process phosphoric acid production using the dihydrate method. Uranium contained in the phosphoric acid was recovered by solvent extraction. The distribution of long-lived natural radionuclides of the ²³⁸U and ²³²Th decay series involved in these operations was evaluated. ²²⁶Ra, ²²⁸Ra and ²¹⁰Pb were found to predominate in the phosphogypsum, while ²²⁸Th, ²³⁰Th and ²³²Th in the uranium-free phosphoric acid. Thorium is removed from the phosphoric acid by solvent extraction to produce a NORM-free phosphoric acid.     

Characterization of Lippia sidoides oil extract-b-cyclodextrin complexes using combined thermoanalytical techniques

Thermoanalytical techniques, being rapid and un-expensive have been used for the investigation of the cyclodextrin inclusion complexes for three decades. The conventional thermoanalytical techniques (TG and DTA/DSC) follow the thermal properties of the uncomplexed compounds. Consequently, the inclusion complex formation as well as the liberation of the entrapped guest cannot be followed. Monitoring the products of the thermal fragmentation of parent cyclodextrin and the included molecule(s), applying TG-MS combined technique provides evidence concerning the inclusion complex formation, and besides, gives selective signal to follow the decomposition of the cyclodextrin inclusion complexes. b-cyclodextrin inclusion complexes of Thymol and Lippia sidoides Cham essential oil extract have been prepared and investigated using conventional and combined (TG-MS) thermoanalytical techniques. The evolved gas analysis proved the inclusion complex formation between the host and guests. By the evaluation of the experimental results the elaboration of the entrapped guests from the cyclodextrin cavity could be followed. This revised version was published online in July 2006 with corrections to the Cover Date.     

A new ionic liquid dimethyldinonylammonium bromide as a flow modifier for the simultaneous determination of eight carboxylates by capillary electrophoresis

Two new methods of capillary zone electrophoresis based on aqueous phosphate running buffers with UV spectrophotometric detection were developed and optimized for the determination of eight carboxylates as copper complexes. Metalcomplexes are negatively charged, so measurements were made as anion analyses with flow reversal in the capillary. Two flow modifiers were used: a common tetradecyltrimethylammonium bromide (TTAB) and a new ionic liquid dimethyldinonylammonium bromide (DMDNAB). The methods were compared to each other. Better separation was achieved with DMDNAB as the flow modifier. Method development was done using a fused silica capillary (61 cm x 50 microm i.d.).Optimization was done using 95 mmol L(-1) phosphate buffer with TTAB or DMDNAB in the concentration 0.5 mmol L(-1) at pH 7.1. A -20 kV voltage and direct UV detection at 254 nm was used in measurements. In both CE methods all the peaks in the electropherograms were properly separated, the calibration plots gave good correlation coefficients and all eight carboxylates were detected in less than 7.5 min. The two methods were tested with natural water samples and a paper mill sample, and proved to be feasible.     

Helical coordination polymers and cyclic dimers formed from heteroleptic thioether-dipyrrinato copper(II) complexes

Heteroleptic copper complexes containing an acetylacetonato ligand and a thioether derivatized dipyrrinato ligand are shown to form oligomers and polymers in the solid state.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

Automatic flow procedure for the determination of ethanol in wine exploiting multicommutation and enzymatic reaction with detection by chemiluminescence

An automatic procedure for the determination of ethanol in wines using a flow system based on multicommutation and enzymatic reaction is described. Alcohol oxidase was immobilized on aminopropyl glass beads and packed in an acrylic column. The peroxide due to enzymatic reaction with ethanol reacted with luminol and generated the chemiluminescence radiation that was monitored by using a laboratory-made detector based on photodiodes. The system manifold comprised a set of 3-way solenoid valves controlled by a microcomputer furnished with electronic interfaces, which ran on software written in Quick BASIC 4.5 to provide facilities to perform on-line sample dilution, reagent addition, and data acquisition. After system parameters optimization, ethanol samples were processed without prior pretreatment. The following suitable features were achieved: linear response ranging from 2.5 to 25% (v/v) ethanol, relative standard deviation of 1.8% (n = 10), detection limit of 0.3% (v/v) ethanol, sampling rate of 23 determinations per hour, and low reagent consumption of 0.23 mg luminol and 7 mg hexacyanoferrate (III) per determination. When the results were compared with those obtained using the AOAC Official Method, no significant difference at the 90% confidence level was observed.     

2‐{[(4‐Methylphenyl)sulfonyl]amino}phenyl 4‐methylbenzenesulfonate

The title compound, C₂₀H₁₉NO₅S₂, crystallizes as an almost 2:1 mixture of two molecular orientations (described as Orient‐A and Orient‐B). The consequences of these two orientations is the formation of three types of N—H...O hydrogen‐bonded dimers in which the (Orient‐A + Orient‐A) dimers are likely to be the most stable, while the mixed (Orient‐A + Orient‐B) dimers are more frequent. Extra interactions in the form of C—H...O and C—H...π interactions act to further stabilize these dimers and probably allow the less energetically favourable (Orient‐A + Orient‐B) and (Orient‐B + Orient‐B) hydrogen‐bonded dimers to exist by preventing their conversion to (Orient‐A + Orient‐A)‐only hydrogen‐bonded dimers during the crystal‐growth process.     

Stereochemical features of the physical and chemical interactions of singlet oxygen with enecarbamates

Oxazolidinone-substituted enecarbamates represent a mechanistically rich system for the study of stereoelectronic, steric, and conformational effects on stereoselectivity and mode selectivity in (1)O(2) [2 + 2] and ene reactions. Photooxygenation of these enecarbamates with (1)O(2) leads to diastereomerically pure dioxetanes that decompose to yield an oxazolidinone carbaldehyde and one of the two enantiomers of methyldesoxybenzoin in enantiomeric excess. Stereoselectivity originates at the allylic stereocenter, a result supported by quenching studies, computational analysis, and deuterium solvent isotope effects. [reaction: see text]