Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

(CuBr)3P4Se4: A Low Symmetric Variant of the (CuI)3P4Se4 Structure Type

Bright orange (CuBr)₃P₄Se₄ is obtained from the reaction of CuBr, P, and Se in stoichiometric amounts (CuBr : P : Se = 3 : 4 : 4). The composition and the crystal structure of the compound were determined from single crystal X‐ray diffraction data. Lattice constants are a = 33.627(2) Å, b = 6.402(1) Å, c = 19.059(1) Å, β = 90.19(3) °, V = 4103.2(3) ų, and Z = 12. The compound crystallizes in a structure that is related to (CuI)₃P₄Se₄. Cages of β‐P₄Se₄ are stacked along the b‐axis and are separated by columns of copper(I) bromide. However, the coordination of the β‐P₄Se₄ cage molecules to the copper atoms in the CuBr columns in (CuBr)₃P₄Se₄ is quite different from (CuI)₃P₄Se₄. The monoclinic compound (space group: P2₁, no. 4) has an almost orthorhombic metric in combination with a threefold superstructure in [100]. Structural aspects of (CuBr)₃P₄Se₄ are discussed with respect to the heavier homologue (CuI)₃P₄Se₄.     

Porous MoS2 synthesized by ultrasonic spray pyrolysis

The hydrodesulfurization (HDS) activity of molybdenum sulfide-based catalysts is localized to the edges of this layered solid and is, therefore, highly dependent on the technique used to prepare the material. Here, ultrasonic spray pyrolysis (USP) was used to synthesize porous, nanostructured MoS2. Low surface area powders, not useful for catalysis, are generally produced by USP. This work shows that when combined with a dissolvable template, USP is capable of producing high surface area materials. An aqueous solution of ammonium tetrathiomolybdate and colloidal silica was nebulized and pyrolyzed to give a MoS2/SiO2 composite material. Leaching with HF removed the sacrificial SiO2, resulting in a highly porous MoS2 network with surface areas as high as 250 m2/g. Cobalt-promoted MoS2 networks were also synthesized. The thiophene HDS activities of these materials were substantially higher than those of unsupported MoS2 and RuS2 standards, illustrating the enhanced dispersion of the HDS active phase achieved by this synthetic technique.     

Vilsmeier formylation of 5,10,15-triphenylcorrole: expected and unusual products

5,10,15-Triphenylcorrole (1) reacts with the Vilsmeier reagent (POCl(3)/DMF) to give the corresponding 3-formyl derivative 3 as the major product. The regioselectivity of the reaction was proven by X-ray crystallography and only traces of the 2-formyl isomer were observed. A more polar product is also observed and this compound becomes the major product when an excess of DMF is used for the preparation of the Vilsmeier reagent, while the formation of the 3-formyl isomer is almost completely suppressed. X-ray crystallography allowed us to identify this compound as the fully substituted N-ethane bridged derivative 4, formed from the attack of the Vilsmeier reagent at the inner core of the macrocycle. This compound is unique among porphyrinoid macrocycles, and further confirms the peculiarity of corrole chemistry.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

Fairness in ambulance routing for post disaster management

Central European Journal of Operations Research - Disaster management generally includes the post-disaster stage, which consists of the actions taken in response to the disaster damages. These...     

Binding of an inhibitor of the p53/MDM2 interaction to MDM2

The mode of action of the secondary metabolite chlorofusin, which antagonises the interaction between p53 and MDM2, involves direct binding to the N-terminal domain of MDM2.     

Preparation and self-assembly of chiral porphyrin diads on the gold electrodes of quartz crystal microbalances: a novel potential approach to the development of enantioselective chemical sensors

Porphyrin diad 1 was synthesized by reaction of the acyl chloride of porphyrin 2 and trans-1,2-dithiane-4,5-diol. The Co complex of this diad was studied as a potential enantioselective receptor for chiral recognition in solution and in the solid state. In solution both enantiomers of limonene induce significant changes in the visible and circular dichroism (CD) spectra of [Co2(1)], while a different behavior is observed in the case of the enantiomeric pair of trans-1,2-diaminocyclohexane. A different efficiency of [Co2(1)] chiral recognition is obtained for these compounds, with a remarkable degree of enantiodiscrimination observed in the case of limonene. Self-assembled monolayers of [Co2(1)] were deposited onto the gold electrodes of quartz crystal microbalances to be used as sensing materials of nanogravimetric sensors operating in the gas phase. The enantiodiscrimination properties of these sensors towards the enantiomeric pairs of chiral analytes have been studied. While in the case of analytes bearing donor ligand atoms we did not observe a remarkable enantioselectivity, a significant degree of chiral discrimination was observed in the case of limonene; this result is particularly encouraging for the potential development of enantioselective chemical sensors for use in an array configuration.     

Gaucher disease-associated glucocerebrosidases show mutation-dependent chemical chaperoning profiles

Gaucher disease is a lysosomal storage disorder caused by deficient glucocerebrosidase activity. We have previously shown that the cellular activity of the most common Gaucher disease-associated glucocerebrosidase variant, N370S, is increased when patient-derived cells are cultured with the chemical chaperone N-nonyl-deoxynojirimycin. Chemical chaperones stabilize proteins against misfolding, enabling their trafficking from the endoplasmic reticulum. Herein, the generality of this therapeutic strategy is evaluated with other glucocerebrosidase variants and with additional candidate chemical chaperones. Improved chemical chaperones are identified for N370S glucocerebrosidase. Moreover, we demonstrate that G202R, a glucocerebrosidase variant that is known to be retained in the endoplasmic reticulum, is also amenable to chemical chaperoning. The L444P variant is not chaperoned by any of the active site-directed molecules tested, likely because this mutation destabilizes a domain distinct from the catalytic domain.     

Determination of salicylate in blood serum using an amperometric biosensor based on salicylate hydroxylase immobilized in a polypyrrole-glutaraldehyde matrix

The use of an amperometric biosensor for the salicylate determination in blood serum is described. The biosensor is based on salicylate hydroxylase (EC 1.14.13.1) electropolymerized onto a glassy carbon-working electrode with polypyrrole and glutaraldehyde, to improve the biosensor lifetime. The hexacyanoferrate (II) was also incorporated to work as a redox mediator to minimize possible interferences. The salicylate is enzymatically converted to catechol, which is monitored amperometrically by its electrooxidation at+0.170 V versus SCE (saturated calomel electrode). Salicylate determination was carried out maintaining the ratio between beta-NADH and salicylate at 4:1 (30 degrees C). The amperometric response of the biosensor was linearly proportional to the salicylate concentration between 2.3x10(-6) and 1.4x10(-5) mol l(-1), in 0.1 mol l(-1) phosphate buffer (pH 7.8), containing 0.1 mol l(-1) KCl and 5.0x10(-4) mol l(-1) Na(2)H(2)EDTA, as supporting electrolyte. The recovery studies, in the presence of several interfering compounds, showed recoveries between 96.4 and 104.8%. The useful lifetime of the biosensor in the concentration range evaluated was at least 40 days, in continuous use. Blood serum samples analyzed by this biosensor showed a good correlation compared to the spectrophotometric method (Trinder) used as reference, presenting relative deviations lower than 7.0%.