The bakkenolides from the root of Petasites formosanus and their cytotoxicity.

Thirty-two new bakkenolides, bakkenolides-Db (1)--Dh(7), -Fa(8), -Fb(9), -I(10)--M(14), -Na(15), -Nb(16), -O(17)--T(22), -Ua (23), -Ub(24), -V(25)--X(27), -Ya(28), -Yb(29), -Za(30), -Zb(31) and -III(32), from the roots of Petasites formosanus together with thirty known compounds were isolated. The structures were characterized by spectral analysis. The locations, C-1 and/or C-9 of bakkenolide skeleton, of the substituents, such as acetoxy, isobutyroyloxy and isovaleroyloxy groups, can be determined by the chemical shifts of their signals and the H-1 and/H-9 in the 1H-NMR spectra. The cytotoxicity was also discussed.     

The Osher scheme for non-equilibrium reacting flows

An extension of the Osher upwind scheme to non-equilibrium reacting flows is presented, Owing to the presence of source terms, the Riemann problem is no longer self-similar and therefore its approximate solution becomes tedious. With simplicity in mind, a linearized approach which avoids an iterative solution is used to define the intermediate states and sonic points. The source terms are treated explicitly. Numerical computations are presented to demonstrate the feasibility, efficiency and accuracy of the proposed method. The test problems include a ZND (Zeldovich-Neumann-Doring) detonation problem for which spurious numerical solutions which propagate at mesh speed have been observed on coarse grids. With the present method, a change of limiter causes the solution to change from the physically correct CJ detonation solution to the spurious weak detonation solution.     

Curing and pyrolysis of epoxy resins containing 2-(6-oxido-6<Emphasis Type="Italic">H</Emphasis>-dibenz(<Emphasis Type="Italic">c</Emphasis>,<Emphasis Type="Italic">e</Emphasis>)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol or bisphenol S

This work examines the curing kinetics, thermal properties, and decomposition kinetics of diglycidyl ether of bisphenol A (DGEBA) epoxies with three different curing agents, 2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (ODOPN), bisphenol A (BPA), and bisphenol S (BPS). The differential scanning calorimetry curing study reveals that the curing kinetics of the DGEBA/ODOPN epoxy is first order, independent of the scan rate. The ODOPN-containing epoxy, unlike the conventional BPA one, includes a phosphorus-containing bulky pendant aromatic group and results in an increase in the glass-transition temperature of 83 K, the char yield increases by a factor of 3, and the limiting oxygen index values increase from 23 to 27. For the BPS system, the glass-transition temperature increased slightly, and both the char yield and the limiting oxygen index value increased insignificantly when the test was conducted in air. Finally, the thermogravimetric analysis decomposition study in N₂ from Ozawa's analysis demonstrates that the DGEBA/BPS epoxy has the highest activation energy, followed by the regular DGEBA/BPA system, and lastly the DGEBA/ODOPN has the lowest activation energy. The low activation energy for the ODOPN system is attributed to the initial decomposition of the phosphorus compound in the formation of an insulating layer.     

Preparation and properties of new soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)biphenyl dianhydride and aromatic diamines

A new aromatic tetracarboxylic dianhydride having a crank and twisted noncoplannar structure, 2,2′-bis(3,4-dicarboxyphenoxy)biphenyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with biphenyl-2,2′-diol, followed by hydrolysis and cyclodehydration. The biphenyl-2,2′-diyl-containing aromatic polyimides having inherent viscosities up to 0.66 dL/g were obtained by the conventional two-step procedure starting from the dianhydride monomer and various aromatic diamines. Most of the polyimides were readily soluble in amide-type solvents such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone. The aromatic polyimides had glass transition temperatures in the range of 205–242°C, and began to lose weight around 415°C, with 10% weight loss being recorded at about 500°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2021–2027, 1998     

Constituents from Rubia Ustulata Diels and R. Yunnanensis Diels and Their Antiplatelet Aggregation Activity

A new anthraquinone glycoside, rubiayannone‐A ( 1 ), and a new coumarin, rubilatin‐A ( 2 ), together with twenty‐two known compounds were isolated and characterized from the roots of Rubia ustulata. A new anthraquinone, 2‐carbomethoxyanthraquinone ( 3 ), and rubiayannone‐A, 2‐formylanthraquinone were obtained from the roots of R. yunnanensis. The structures of those compounds were elucidated by spectroscopic methods. The antiplatelet aggregation activity of the isolated compounds 1, 4～6 were also discussed.     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

Polyterephthalamides with naphthoxy‐pendent groups

A series of new aromatic polyamides having pendent naphthoxy groups were synthesized by the triphenyl phosphite‐activated polycondensation of (2‐naphthoxy)terephthalic acid (NOTPA) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The diacid monomer NOTPA was prepared from the nitro displacement of dimethyl 2‐nitroterephthalate with the potassium naphthoxide of β‐naphthol, followed by base‐induced ester hydrolysis. All the resulting polymers were noncrystalline and readily soluble in aprotic polar solvents such as NMP and N,N‐dimethylacetamide. Almost all the polymers could be solution‐cast to tough, creasable amorphous films with good mechanical properties, the values of tensile strengths ranging from 90 to 124 MPa with initial moduli ranging from 1.72 to 2.51 GPa. Except for two examples, all the other polyamides displayed discernible glass transitions between 189 and 248 °C in the differential scanning calorimetric traces. These polyamides showed insignificant decomposition below 400 °C in nitrogen or air. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1781–1789, 2002     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002