Polymerization of tetrahydrofuran by AlEt3–H2O promoter system: Rate of propagation reaction

Kinetic studies were carried out on the polymerization of tetrahydrofuran with catalyst systems of aluminum alkyl–epichlorohydrin. As aluminium alkyl species AlEt₃, AlEt₃–H₂O (1:0.1 to 1:1.0), and “oxyaluminum ethyl” were employed. The polymerizations with these catalysts are characterized by a mechanism of stepwise addition without chain transfer or termination, which is expressed by the kinetic relation R_p = K_p[P*] ([M]–[M]_e), where [M] and [M]_e are the instantaneous and equilibrium concentrations of monomer and [P*] is the concentration of propagating species calculated from the amount and molecular weight of the product polymer. The determination of the rate constant k_p for these catalysts has shown that the polymerization rate varied considerably with the change of aluminum alkyl species, i.e., with the water-to-aluminum ratio, but the propagation rate constant itself varied very little. The variation of polymerization rate was, therefore, attributed primarily to the differences in concentration of the propagating species, i.e. the efficiency of the catalyst in forming propagating species. The catalyst efficiency was closely related to the acid strength of the aluminum alkyl species, which was estimated from the magnitude of shift of the xanthone carbonyl band in the infrared spectrum of its coordination complex with aluminum alkyl. The maximal catalyst efficiency was attained at about [H₂O]/[AlEt₃] = 0.75.     

Determination of heat of mixing and heat of vaporization with a differential scanning calorimeter

A simple method is presented for measuring the heat of mixing and the heat of vaporization of volatile liquids at temperatures below their boiling point. It consists in introducing liquids by a microsyringe into a nearly closed cell of the DSC. The relative standard deviation for 4 to 5 runs is ca. 5% for heat of mixing and ca. 2% for heat of vaporization.     

The annealing behavior of hydrogen implanted into Al-1.5 at.% Si alloy

We have studied effects of added elements as well as defects on trap-sites of hydrogen in metals. For the purpose, we observed depth profiles and thermal behaviors of hydrogen implanted into Al-1.5 at.% Si alloy samples in an implantation-temperature range of liquid nitrogen temperature (LNT) to 373 K at different doses. The results were compared with those for pure aluminum samples. It was found that hydrogen is trapped as molecules in grain boundaries of Al/Si.     

A fluorimetric, column-switching HPLC and its application to an elimination study of LLU-alpha enantiomers in rat plasma

A method for the enantiomeric determination of 2,7,8-trimethyl-2-(beta-carboxyethyl)-6-hydroxy chroman (LLU-alpha, gamma-CEHC) in rat plasma was developed using high-performance liquid chromatography (HPLC) with a fluorimetric derivatization with 4-N, N-dimethylaminosulfonyl-7-piperazino-2,1,3-benzoxadiazole (DBD-PZ) followed by O-acetylation with acetyl chloride. The proposed HPLC system used two non-chiral columns (phenyl and octadecylsilica) and a chiral column (a modified cellulose type), which were connected via two column-switching valves. A derivatized sample prepared from rat plasma was first separated on the phenyl column, and the fraction including LLU-alpha derivative was introduced to the octadecylsilica column to quantify the concentration of the mixture of S- and R-LLU-alpha. Finally, the LLU-alpha derivative was directly injected into the chiral column to obtain the ratio of the enantiomers. The proposed HPLC system was applied to the enantiomeric determination of LLU-alpha in plasma after intravenous administration of racemic LLU-alpha. S-LLU-alpha was eliminated faster than R-LLU-alpha, and its concentration in plasma decreased to one-third at 2 min after dosing.     

A method for the measurement of catechol-O-methyltransferase activity using norepinephrine, an endogenous substrate

We propose a highly sensitive method for the measurement of catechol-O-methyltransferase (COMT) activity with norepinephrine (NE), an endogenous native substrate. The product, normetanephrine, was determined by high-performance liquid chromatography (HPLC)-peroxyoxalate chemiluminescence reaction detection or, if required, less sensitive fluorescence detection. For the measurement of membrane-bound (MB)-COMT activity in the rat erythrocyte, the HPLC-peroxyoxalate chemiluminescence reaction detection was employed. Soluble (S)- and MB-COMT activities in the rat erythrocyte were 22.9 +/- 2.5 and 4.62 +/- 1.23 pmol min-1 (mg protein)-1, respectively (n = 5). The Km values obtained for S- and MB-COMT were 366 +/- 31 mumol l-1 and 12.0 +/- 1.1 mumol l-1, respectively (n = 5), suggesting that the use of NE as a substrate would give more precise information on the role of both isoenzymes. However, with dihydroxybenzoic acid as an artificial substrate, the Km values for S- and MB-COMT were similar, with values of 69.2 +/- 11.4 mumol l-1 and 72.2 +/- 9.2 mumol l-1, respectively. The proposed method is thought to be useful for the measurement of both S-COMT and MB-COMT activities, and would give us critical information on the role of metabolism of catecholamines in rat tissues.     

A Non‐Enzymatic Pathway with Superoxide in Intracellular Terpenoid Synthesis

Non‐C₅‐units terpenoids (norisoprenoids) with an acetonyl group are widely distributed in nature. However, studies on the biosynthesis of norisoprenoids are scarce. Now, the C₃₃ norisoprenoid, (all‐E)‐farnesylfarnesylacetone, was identified from Bacillus spp. and it was elucidated for the first time that superoxide mediates the cleavage of menaquinones (vitamin K) to form norisoprenoids in saponification treatment. From in vivo experiments using gene‐disrupted Bacillus subtilis strains targeted for enzymes responsible for menaquinone biosynthesis and for superoxide dismutase, it was suggested that the non‐enzymatic cleavage (autoxidation) of menaquinone with superoxide resulted in norisoprenoid synthesis in Bacillus cells. Furthermore, the bioactive norisoprenoids, farnesylacetone and phytone, were produced in Bacillus cells by this novel synthesis system.     

A Smart Sensing Method for Object Identification Using Circularly Polarized Luminescence from Coordination‐Driven Self‐Assembly

The potential use of circularly polarized luminescence for object identification in a sensor application is demonstrated. New luminescence probes using pyrene derivatives as sensor luminophores were developed. (R,R)‐Im₂Py and (S,S)‐Im₂Py contain two chiral imidazole moieties at 1,6‐positions through ethynyl spacers (angle between spacers ca. 180°). The probe molecules spontaneously self‐assemble into chiral stacks (P or M helicity) upon coordination to metal ions with tetrahedral coordination (Zn²⁺). The chiral probes display neither circular dichroism (CD) nor circularly polarized luminescence (CPL) without metal ions. However, (R,R)‐Im₂Py and (S,S)‐Im₂Py exhibit intense chiroptical activity (CD and CPL) upon self‐assembly with Zn²⁺ ions. (R,R)‐Im₂Py and (S,S)‐Im₂Py with chemical stimuli‐responsibility allow sensing using the CPL signal as detection output, enabling us to discriminate between a signal from the target analyte and that from non‐target species.     

Fluorogenic and fluorescent labeling reagents with a benzofurazan skeleton

Fluorogenic and fluorescent labeling reagents having a benzofurazan (2,1,3-benzoxadiazole) skeleton such as 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), 4-N,N-dimethylaminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (DBD-F), 4-aminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (ABD-F), ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate (SBD-F), 4-hydrazino-7-nitro-2,1,3-benzoxadiazole (NBD-H), 4-N,N-dimethylaminosulfonyl-7-hydrazino-2,1,3-benzoxadiazole (DBD-H), 4-nitro-7-N-piperazino-2,1,3-benzoxadiazole (NBD-PZ), 4-N,N-dimethylaminosulfonyl-7-N-piperazino-2,1,3-benzoxadiazole (DBD-PZ), 4-(N-chloroformylmethyl-N-methyl)amino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole (DBD-COCl) and 7-N,N-dimethylaminosulfonyl-4-(2,1,3-benzoxadiazolyl) isothiocyanate (DBD-NCS) are reviewed in terms of synthetic method, reactivity, fluorescence characteristics, sensitivity and application to analytes.     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.