A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

Semiconducting behavior of type-I Si clathrate K8Ga8Si38

A ternary type-I Si clathrate K(8)Ga(8)Si(38) has been revealed to be an indirect band gap semiconducting material with an energy gap (E(g)) of approximately 0.10 eV, which is much smaller than the calculated E(g) value that is 0.15 eV wider than E(g) of elemental Si with the diamond-type structure.     

Nickel-iminophosphine-catalyzed [4+2] cycloaddition of enones with allenes: synthesis of highly substituted dihydropyrans

Enones were found to react with allenes intermolecularly in the presence of a catalytic amount of a nickel-iminophosphine complex to provide dihydropyrans via oxidative cyclization of an enone and Ni(0).     

Specific counterion effect on the adsorbed film of cationic surfactant mixtures at the air/water interface

To investigate the counterion effects, we employed dodecyltrimethylammonium bromide (DTABr)-dodecyltrimethylammonium tetrafluoroborate (DTABF(4)) mixed aqueous solutions and measured their surface tensions, then analyzed these data in a thermodynamic treatment. The tensiometry showed that DTABF(4) was more effective in lowering the surface tension of water. The phase diagram of adsorption demonstrated that the surface was enriched with BF(4)(-) ions, but the composition of Br(-) ions in the adsorbed film was slightly enhanced compared to the ideal mixing criteria. These were explained in terms of the size and polarizability of counterions. Moreover, the distribution of counterions of the DTABr-DTABF(4) mixtures in the adsorbed film is greatly different from that of the 1-hexyl-3-methylimidazolium bromide (HMIMBr)-1-hexyl-3-methylimidazolium tetrafluoroborate (HMIMBF(4)) mixtures, where a stronger hydrogen-bonding exists between BF(4)(-) and HMIM(+) ions. These findings suggest that the adsorption of counterions in electric double layers is likely subject to two factors: the nature of counterion and their interactions with surfactant ions.     

Proton transport properties of poly(aspartic acid) with different average molecular weights

We synthesized seven partially protonated poly(aspartic acids)/sodium polyaspartates (P-Asp) with different average molecular weights to study their proton transport properties. The number-average degree of polymerization (DP) for each P-Asp was 30 (P-Asp30), 115 (P-Asp115), 140 (P-Asp140), 160 (P-Asp160), 185 (P-Asp185), 205 (P-Asp205), and 250 (P-Asp250). The proton conductivity depended on the number-average DP. The maximum and minimum proton conductivities under a relative humidity of 70% and 298 K were 1.7 · 10^?3 S cm^?1 (P-Asp140) and 4.6 · 10^?4 S cm^?1 (P-Asp250), respectively. Differential thermogravimetric analysis (TG-DTA) was carried out for each P-Asp. The results were classified into two categories. One exhibited two endothermic peaks between t = (270 and 300) °C, the other exhibited only one peak. The P-Asp group with two endothermic peaks exhibited high proton conductivity. The high proton conductivity is related to the stability of the polymer. The number-average molecular weight also contributed to the stability of the polymer.     

Control of the Solid‐State Chiral Optical Properties of a Supramolecular Organic Fluorophore Containing 4‐(2‐Arylethynyl)‐Benzoic Acid

The solid‐state chiral optical properties of a 4‐(2‐arylethynyl)‐benzoic acid/amine supramolecular organic fluorophore can be controlled by changing the arylethynyl group of the achiral 4‐(2‐arylethynyl)‐benzoic acid component molecule rather than the chirality of the amine component molecule.     

Matrix-mediated formation of hierarchically structured SnO crystals as intermediates between single crystals and polycrystalline aggregates

Crystalline SnO grown in a Sn 6O 4(OH) 4 matrix exhibited hierarchical architectures, such as stepped bipyramids, stacked meshes, and rosettes, which were not categorized into the classical assortment of crystal morphologies. The complex architectures consisting of small building units were found to be produced through stacking and/or branching growth accompanied with a decrease in the unit size and degradation of the crystallographic symmetry in their assembly. This particular morphological evolution is presumed to be achieved by increasing the driving force of crystallization in the presence of abundant precursor species supplied from the matrix.     

A Solid‐State Fluorescent Host System with a 21‐Helical Column Consisting of Chiral (1R,2S)‐2‐Amino‐1,2‐diphenylethanol and Fluorescent 1‐Pyrenecarboxylic Acid

A solid‐state fluorescent host system was created by self‐assembly of a 2₁‐helical columnar organic fluorophore composed of (1R,2S)‐2‐amino‐1,2‐diphenylethanol and fluorescent 1‐pyrenecarboxylic acid. This host system has a characteristic 2₁‐helical columnar hydrogen‐ and ionic‐bonded network. Channel‐like cavities are formed by self‐assembly of this column, and various guest molecules can be included by tuning the packing of this column. Moreover, the solid‐state fluorescence of this host system can change according to the included guest molecules. This occurs because of the change in the relative arrangement of the pyrene rings as they adjust to the tuning of the packing of the shared 2₁‐helical column, according to the size of the included guest molecules. Therefore, this host system can recognize slight differences in molecular size and shape.     

Catalysis of 3-pyrrolidinecarboxylic acid and related pyrrolidine derivatives in enantioselective anti-Mannich-type reactions: importance of the 3-acid group on pyrrolidine for stereocontrol

The development of enantioselective anti-selective Mannich-type reactions of aldehydes and ketones with imines catalyzed by 3-pyrrolidinecarboxylic acid and related pyrrolidine derivatives is reported in detail. Both (3R,5R)-5-methyl-3-pyrrolidinecarboxylic acid and (R)-3-pyrrolidinecarboxylic acid efficiently catalyzed the reactions of aldehydes with alpha-imino esters under mild conditions and afforded anti-Mannich products with high diastereo- and enantioselectivities (anti/syn up to 99:1, up to >99% ee). For the reactions of ketones with alpha-imino esters, (R)-3-pyrrolidinecarboxylic acid was an efficient catalyst (anti/syn up to >99:1, up to 99% ee). Evaluation of a series of pyrrolidine-based catalysts indicated that the acid group at the beta-position of the pyrrolidine ring of the catalyst played an important role in forwarding the carbon-carbon bond formation and in directing anti-selectivity and enantioselectivity.