Formation of 10-30 nm SiO2/Si structure with a uniform thickness at ∼120 °C by nitric acid oxidation method

Silicon dioxide (SiO₂) layers with a thickness more than 10 nm can be formed at ∼120 °C by direct Si oxidation with nitric acid (HNO₃). Si is initially immersed in 40 wt.% HNO₃ at the boiling temperature of 108 °C, which forms a ∼1 nm SiO₂ layer, and the immersion is continued after reaching the azeotropic point (i.e., 68 wt.% HNO₃ at 121 °C), resulting in an increase in the SiO₂ thickness. The nitric acid oxidation rates are the same for (1 1 1) and (1 0 0) orientations, and n-type and p-type Si wafers. The oxidation rate is constant at least up to 15 nm SiO₂ thickness (i.e., 1.5 nm/h for single crystalline Si and 3.4 nm/h for polycrystalline Si (poly-Si)), indicating that the interfacial reaction is the rate-determining step. SiO₂ layers with a uniform thickness are formed even on a rough surface of poly-Si thin film.     

NMR studies of the superconducting state of copper oxide superconductors

The authors review and up-date their work on Knight shifts, spin-lattice relaxation, and indirect nuclear spin-spin coupling for YBa₂Cu₃O₇ in the superconducting state. The data are analyzed in particular to show what it may indicate about the orbital and spin pairing of the superconducting state.     

Fluorescence-based temperature sensing using erbium-doped optical fibers with 1.48 μm pumping

Temperature sensing using 1.54 μm fluorescence at the transition between the energy levels⁴I_15/2 (ground state) and⁴I_13/2 generated in an erbium-doped fiber with 1.48 μm pumping is proposed. The fluorescence has a peculiar spectral profile that possesses two peaks around 1.530 μm and 1.552 μm wavelengths. The temperature-dependent fluorescence is investigated in the temperature range between -50°C and 90°C. The power ratio between the two peaks increases with an increase in temperature. The sensitivity of the ratio is 0.007/°C on average in the measured temperature range. The total fluorescence power and the absorption loss at λ = 1480 nm in the fiber decrease as the temperature increases. Optical fiber temperature sensing immune from the fluctuation in pumping power can be performed using the peak power ratio and/or the absorption loss.     

Computing simple circuits from a set of line segments

We address the problem of connecting line segments to form the boundary of a simple polygon—a simple circuit. However, not every set of segments can be so connected. We present anO(n logn)-time algorithm to determine whether a set of segments, constrained so that each segment has at least one endpoint on the boundary of the convex hull of the segments, admits a simple circuit. Furthermore, this technique can also be used to compute a simple circuit of minimum perimeter, or a simple circuit that bounds the minimum area, with no increase in computational complexity.     

Studies on the effects of imidazole on the peroxyoxalate chemiluminescence detection system for high performance liquid chromatography

The catalytic effect of bases (imidazole, pyridine, Tris and triethylamine) on the peroxyoxalate chemiluminescence (PO-CL) reaction for high performance liquid chromatography (HPLC) was investigated. Imidazole increased PO-CL intensity extraordinarily, whereas the other bases (pyridine, Tris and triethylamine) did not. The peak heights of dipyridamole (coronary vasodilator) obtained using the eluents containing buffers were largest at pH 7.0, a few times less at pH 6.0 and pH 5.0, 100 times less at pH 4.0 and a few hundred times less at pH 3.0. The eluents containing buffers at pH 3, 4, 5, 6 or 7 each with imidazole increased the peak heights by a few to ten times as compared with those without imidazole, and those peak heights were within one order of magnitude. On the other hand, the eluent containing buffer at pH 2 did not affect the peak heights with or without imidazole. Bis(4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl) oxalate (TDPO) alone and bis(2,4-dinitrophenyl)oxalate (DNPO) plus TDPO were recommended to be used against eluents containing buffers of pH 5-7 and pH 3-4, respectively. Dipyridamole and benzydamine hydrochloride (anti-inflammatory drug) were separated on the ODS column and detected by the present system. The detection limits of dipyridamole and benzydamine hydrochloride were 40 amol and 270 fmol, respectively.     

Sensitive detection of oxo-steroids and oxo-bile acids by liquid chromatography with peroxyoxalate chemiluminescence detection

Oxo-steroids and oxo-bile acid ethyl esters were derivatized with 5-N,N-dimethylamino-naphthalene-1-sulphonohydrazide (DNS-hydrazine) to DNS-hydrazone in the presence of hydrochloric acid in ethanol or trifluoroacetic acid in benzene, purified by high-performance gel-permeation chromatography, separated on an ODS column with an eluent containing tetrahydrofuran and detected via a peroxyoxalate chemiluminescence reaction using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate (TDPO). Sensitive detection (femtomole level) of each oxo-steroid which appeared as a single peak was achieved. The procedure for the isolation of oxo-bile acids developed for GC-MS allowed the detection by this system of an unusual oxo-bile acid, 7α-hydroxy-3-oxo-5β-cholanic acid, at the nanomole l^?1 level in urine from a patient with cholestatic liver disease.     

Evaluation of pyrimido[5,4-d]pyrimidine derivatives as peroxyoxalate chemiluminescence reagents using a flow injection system

Eighteen kinds of pyrimido[5,4-d]pyrimidines together with several commercially available fluorescent compounds such as perylene, Rhodamine B, etc., were evaluated as the reagents for a peroxyoxalate chemiluminescence (CL) detection system by using a flow injection method. The peroxyoxalate CL reaction employed consists of bis(2,4,6-trichlorophenyl)oxalate, hydrogen peroxide, triethylamine, and a fluorophore. Under the conditions used, 2,6-bis[di-(2-hydroxyethyl)amino]-4,8- dipiperidinopyrimido[5,4-d]pyrimidine (Dipyridamole) and 2,4,6,8-tetrathiomorpholinopyrimido[5,4-d]pyrimidine (1i) gave very intense chemiluminescence intensities which were larger than those of any other commercially available fluorescent compounds tested (e.g., 10 times larger than that of perylene).