Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

Exploring the Reactivity of α‐Lithiated Aryl Benzyl Ethers: Inhibition of the [1,2]‐Wittig Rearrangement and the Mechanistic Proposal Revisited

By carefully controlling the reaction temperature, treatment of aryl benzyl ethers with tBuLi selectively leads to α‐lithiation, generating stable organolithiums that can be directly trapped with a variety of selected electrophiles, before they can undergo the expected [1,2]‐Wittig rearrangement. This rearrangement has been deeply studied, both experimentally and computationally, with aryl α‐lithiated benzyl ethers bearing different substituents at the aryl ring. The obtained results support the competence of a concerted anionic intramolecular addition/elimination sequence and a radical dissociation/recombination sequence for explaining the tendency of migration for aryl groups. The more favored rearrangements are found for substrates with electron‐poor aryl groups that favor the anionic pathway.     

M?ssbauer spectroscopic study of iron�Cnickel nitrides thin films prepared by ion beam assisted deposition

An overview is given of the present status of parity violation tests in neutron decay and nuclear beta decay. Prospects for improved and new measurements are discussed as well.     

Intermolecular spin–spin coupling constants between P atoms

This paper reports the study by NMR spectroscopy and ab initio methods of the structure of 3,4-dimethyl-1-cyanophosphole and its dimer. The dimer presents a P···P interaction of the pnictogen type due to the presence of σ-holes. NMR of the monomer was recorded in CDCl₃ solution while NMR of the dimer corresponds to the solid state (CPMAS) experiments. The ^2pJ_PP spin–spin coupling constant has not been measured, but calculated at the B3LYP level. AIM, NBO and ELF methodologies have been used to describe the electronic structure of the dimer.     

Identification of bioactive peptides in hypoallergenic infant milk formulas by CE‐TOF‐MS assisted by semiempirical model of electromigration behavior

Biologically active peptides derived from complex bovine milk protein hydrolysates are of particular interest in food science and nutrition because they have been shown to play different physiological roles, providing benefits in human health. In this study, we used CE‐TOF‐MS for separation and identification of bioactive peptides in three hypoallergenic infant milk formulas. An appropriate sample cleanup using a citrate buffer with DTT and urea followed by SPE with Sep‐Pack® C18 and StrataX^TM cartridges allowed the detection of a large number of low molecular mass bioactive peptides. This preliminary identification was solely based on the measured experimental monoisotopic molecular mass values (M_exp). Later, we evaluated the classical semiempirical relationships between electrophoretic mobility and charge‐to‐mass ratio (m_e vs. q/M^α, α = 1/2 for the classical polymer model) to describe their migration behavior. The assistance of migration prediction proved to be useful to improve reliability of the identification, avoiding misinterpretations and solving some identity conflicts. After revision, the identity of 24, 30, and 38 bioactive peptides was confirmed in each of the three infant milk formulas. A significant number of these peptides were reported as inhibitors of angiotensin‐converting enzyme, however, the presence of sequences with other biological activities such as antihypertensive, antithrombotic, hypocholesterolemic, immunomodulation, cytotoxicity, antioxidant, antimicrobial, antigenic, or opioid was also confirmed.     

Asymmetric Oxidation of D-Glyceraldehyde Diethyl Dithioacetal with a Sharpless Reagent

Abstract

The asymmetric oxidation reaction of D-glyceraldehyde diethyl dithioacetal 1 and its di-O-acetyl derivative with a Sharpless reagent to produce the corresponding D-glyceraldehyde diethyl dithioacetal S-oxide derivatives takes place with high stereoselectivity. The configuration of the two new chiral centres formed is deduced.     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

TiO2/Fe2O3异质结薄膜的制备及其光电特性的研究

通过水热法成功在FTO上制得Ti O2/Fe2O3异质结薄膜,采用场发射扫描电子显微镜(FESEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱(UV-Vis)分析测试手段对样品的形貌和结构进行了表征。结果表明,Ti O2/Fe2O3异质结是由直径约200~300 nm的Ti O2纳米棒镶嵌着Fe2O3纳米颗粒组成。通过光电流测试,证明Ti O2/Fe2O3异质结的可见光光电转换效率相比Ti O2明显提高,并对Ti O2/Fe2O3异质结的光电转换机理进行了分析。