A new bis(3-hydroxy-4-pyridinone)-IDA derivative as a potential therapeutic chelating agent. Synthesis, metal-complexation and biological assays

A new bis(3-hydroxy-4-pyridinone) derivative of iminodiacetic acid, imino-bis(acetyl(1-(3'-aminopropyl)-3-hydroxy-2-methyl-4-pyridinone)), IDAPr(3,4-HP)(2), has been prepared and studied in its interaction with a set of hard metal ions. This tetradentate ligand presents a much higher chelating efficiency for trivalent hard metal ions (Fe, Ga, Al) than the monodentate derivative Deferriprone, namely at the diluted conditions prevailing in physiological conditions and at low clinical doses. A similar behaviour was also observed for the complexation with Zn(II) but at a significantly lower extent. This compound presents a moderate hydrophilic character at physiological pH (logD=-1.72). In vivo assays showed much more rapid clearance of (67)Ga from most tissues of metal-loaded mice than the drug Deferriprone and the radioactivity excretion occurs mostly through the kidneys. Therefore, results from in vitro and in vivo studies indicated good perspectives for this compound to be a potential decorporating agent for hard metal ions in overload situations without depletion of essential metal ions such as zinc.     

Use of cetyltrimethylammonium bromide as surfactant for the determination of copper and chromium in gasoline emulsions by electrothermal atomic absorption spectrometry

In this work, the use of cetyltrimethylammonium bromide as surfactant for the preparation of oil-in-water emulsions for the determination of Cu and Cr in gasoline by electrothermal atomic absorption spectrometry (ET AAS) was evaluated. The surfactant amount was tested in the range of 25 to 300 mg, added to 2 ml of gasoline, and completed to 10 mL with 0.1% (v/v) nitric acid solution. 150 mg of surfactant was found optimum, and a sonication time of 10 min sufficient to form an oil-in-water emulsion that was stable for several hours. The ET AAS temperature program was established based on pyrolysis and atomization curves. The pyrolysis temperatures were set at 700 and 1300 °C for Cu and Cr, respectively and the selected atomization temperatures were 2400 and 2500 °C. The time and temperature of the drying stage and the atomization time were experimentally tested to provide optimum conditions. The limits of detection were found to be 5 μg L^− 1 and 1.5 μg L^− 1 for Cu and Cr, respectively in the original gasoline samples. The relative standard deviation (RSD) ranged from 4 to 9% in oil-in-water emulsions spiked with 5 μg L^− 1 and 15 μg L^− 1 of each metal, respectively. Recoveries varied from 90 to 98%. The accuracy of the proposed method was tested by an alternate procedure using complete evaporation of the gasoline sample. The method was adequate for the determination of Cu and Cr in gasoline samples collected from different gas stations in Salvador, BA, Brazil.     

Study of a core-shell type impact modifier by inverse gas chromatography

Inverse gas chromatography (IGC) has been used to study the Lewis acid-base properties of a technologically and commercially important core-shell type elastomer (MBS rubber). The parameters determined were the dispersive component of the surface tension, the surface free energy, the enthalpy and the entropy of adsorption of polar and apolar probes, the surface Lewis acidity constant (Ka), and the surface Lewis basicity constant (Kb). The results show that the MBS rubber is amphoteric but strongly Lewis basic. It is weakly Lewis acidic. The results are in accord with the analysis of the molecular structure of PMMA, the shell component of this impact modifier (IM). The interactivity of this elastomer with the remaining materials in multicomponent polymeric systems is expected to be strongly influenced by the particular surface energetic properties of the MBS rubber. The results presented would contribute to the interpretation, forecast and optimization of the adhesion properties and phase preferences shown by this impact modifier when incorporated in such complex polymeric systems as polymer blends and composites.     

Gas chromatography/ion trap tandem mass spectrometry for the analysis of halobenzenes in soils by solid-phase microextraction

Headspace solid-phase microextraction combined with gas chromatography/ion trap tandem mass spectrometry (HS-SPME/GC/ITMS/MS) was used for the analysis of 12 halobenzenes from soil samples. For MS/MS optimisation, the experiments were performed by precursor ion selection and software controlled operations. Collision-induced dissociation (CID) can be achieved by two different approaches, resonant and non-resonant excitation modes. Different results were obtained using the two approaches, and the resonant excitation mode was chosen as the best for all halobenzenes. Parameters such as the CID excitation amplitude, excitation RF storage level and CID bandwidth frequency were optimised to maximise the formation of halobenzene product ions. A 100-microm polydimethylsiloxane fibre was used for the isolation and preconcentration of the analytes. The HS-SPME/GC/ITMS/MS method was applied to the analysis of halobenzenes in an agricultural soil sample. The halobenzenes were quantified by standard addition, which led to good reproducibility (RSD between 4.7 and 9.2%) and detection limits in the low pg/g range. The method was validated by comparing the results with those obtained in a European inter-laboratory exercise.     

Playing with the weakest supramolecular interactions in a 3D crystalline hexakis[60]fullerene induces control over hydrogenation selectivity

Weak forces can play an essential role in chemical reactions. Controlling such subtle forces in reorganization processes by applying thermal or chemical stimuli represents a novel synthetic strategy and one of the main targets in supramolecular chemistry. Actually, to separate the different supramolecular contributions to the stability of the 3D assemblies is still a major challenge. Therefore, a clear differentiation of these contributions would help in understanding the intrinsic nature as well as the chemical reactivity of supramolecular ensembles. In the present work, a controlled reorganization of an hexakis[60]fullerene-based molecular compound purely governed by the weakest van der Waals interactions known, i.e. the dihydrogen interaction – usually called sticky fingers – is illustrated. This pre-reorganization of the hexakis[60]fullerene under mild conditions allows a further selective hydrogenation of the crystalline material via hydrazine vapors exposure. This unique two-step transformation process is monitored by single-crystal to single-crystal diffraction (SCSC) which allows the direct observation of the molecular movements in the lattice and the subsequent solid–gas hydrogenation reaction.

Weak forces play an essential role in chemistry. Controlling these supramolecular interactions will contribute to the creation dynamic absorbent materials with a variety of technological applications as chemosensors and environmental remediation.     

Cyclohexylethynyl complexes of CoII and FeII

This paper deals with the synthesis of six σ-cyclohexylethynyl complexes of Co^II and Fe^II and their characterization by chemical analysis, infrared and ¹H NMR spectra, and magnetic measurements. Four of them are six-coordinate complexes, unsubstituted or substituted, namely K₄[M(C≡C—C₆H₁₁)₆] nNH₃(M = Co, n = 2; M = Fe, n = 0), K₂[Co(C≡C₆H₁₁)₄(NH₃)₂] and K₄[Fe(CN)₄-(C≡C—C₆H₁₁)₂]. Two are four-coordinate complexes of formula [(Ph₃P)₂M-(C≡C₆H₁₁)₂] (M = Co, Fe). All are low-spin complexes, the magnetic moment for the six-coordinate Co(II) complexes, measured at various temperatures, being intermediate between low- and high-spin values.     

Chemiluminometric determination of carvedilol in a multi-pumping flow system

In this work a simple, fast, sensitive and selective flow-based procedure for the chemiluminometric determination of carvedilol, a recent non-cardioselective β-blocker with noteworthy antioxidant activity, is proposed. The developed methodology takes advantage of the antioxidant capacity of carvedilol to inhibit the chemiluminescence response resulting from the oxidation of luminol by hypochlorite, by acting as a hypochlorite scavenger. The analytical process was implemented in a multi-pumping flow system that employs multiple solenoid actuated micro-pumps as the only active components. These acted as solution insertion, propelling and commuting units assuring an easily controlled, low cost, compact and reliable analytical system.A linear working range for carvedilol concentrations ranging from 1.2 × 10⁻⁷ to 3.0 × 10⁻⁶ mol l⁻¹ (r > 0.999, n = 6), was obtained, with a detection limit of 8.7 × 10⁻⁹ mol l⁻¹. The system handles about 65 samples per hour yielding precise results (R.S.D. < 1.3%, n = 10). Recoveries within 95 and 104% were obtained.     

Efficient approaches toward the solid-phase synthesis of new heterocyclic azoniaspiro ring systems: synthesis of tri- and tetrasubstituted 10-oxo- 3,9-diaza-6-azoniaspiro[5.5]undecanes

[Reaction: see text]. An efficient approach for the parallel solid-phase synthesis of novel heterocyclic azoniaspiro ring systems is described. The target compounds, the 1,8,9-trisubstituted 10-oxo-3,9-diaza-6-azoniaspiro[5.5]undecanes, were obtained starting from resin-bound reduced dipeptides. The azoniaspiro cation was formed by intramolecular attack of a tertiary nitrogen on pendent alpha-bromocarbonyl. N-3 acylated and N-3 alkylamino carbonyl derivatives of the 1,8,9-trisubstituted 10-oxo-3,9-diaza-6-azoniaspiro[5.5]undecanes were obtained following in solution treatment of the N-3 azoniaspiro derivatives with different carboxylic acids and isocyanates.     

Equation of state of nonadditive d-dimensional hard-sphere mixtures

An equation of state for a multicomponent mixture of nonadditive hard spheres in d dimensions is proposed. It yields a rather simple density dependence and constitutes a natural extension of the equation of state for additive hard spheres proposed by us [A. Santos, S. B. Yuste, and M. Lopez de Haro, Mol. Phys. 96, 1 (1999)]. The proposal relies on the known exact second and third virial coefficients and requires as input the compressibility factor of the one-component system. A comparison is carried out both with another recent theoretical proposal based on a similar philosophy and with the available exact results and simulation data in d=1, 2, and 3. Good general agreement with the reported values of the virial coefficients and of the compressibility factor of binary mixtures is observed, especially for high asymmetries and/or positive nonadditivities.     

Determination of Phenolic Compounds Based on Co‐Immobilization of Methylene Blue and HRP on Multi‐Wall Carbon Nanotubes

This work evaluated an amperometric biosensor based on multi‐wall carbon nanotubes (MWCNT), chemically modified with methylene blue (Met) and horseradish peroxidase (HRP), for detection of phenolic compounds. The dependences of the biosensor response due to the enzyme immobilization procedure, HRP amounts, pH and working potential were investigated. The amperometric response for catechol using the proposed biosensor showed a very wide linear response range (1 to 150 μmol L^?1), good sensitivity (50 nA cm^?2 μmol^?1 L), excellent operational stability (after 300 determinations the response remained at 97%) and very good storage stability (lifetime>3 months). Based on all these characteristics, it is possible to affirm that the material is promising for phenol detection due to its good electrochemical response and enzyme stabilization. The biosensor response for various phenolic compounds was investigated.