Optimizing Cs-exchange in titanosilicate with the mineral pharmacosiderite topology: framework substitution of Nb and Ge

Titanosilicates with complete or partial substitution of Ge or Nb in the framework and having the mineral pharmacosiderite topology were hydrothermally prepared and their ion-exchange properties towards Cs were studied for Ti/Ge/Si, Ti/Si, Nb/Ti/Si and pure Ge phases. The basis for the differences in the ion exchange properties measured as distribution coefficients (K_d) for these materials are detailed via structural characterization using the Rietveld refinement technique on the X-ray powder diffraction data. The differences in affinity towards Cs⁺ result either from the degree of hydration of the exchanger resulting in different coordination environments or the position of cesium ion in the eight-ring channel.     

Analogs of propranolol. Synthesis of 3-alkylamino-1-(3-benzo[b]thienyloxy)-2-propanols

The synthesis by two alternative routes of 1-(3-benzo[b]thienyloxy)-3-isopropylamino-2-propanol hydrochloride ( 1a HCl), a thiophenic isoster of Propranolol, and related compounds, is reported. The protecting and enolizing properties of the 2-methoxycarbonyl group on benzo[b]thiophene-3-one, along with its facile removal, are utilized in the first route. In the second one, conversion of 3-bromobenzo[b]thiophene in 1-(3-benzo[b]thienyloxy)-2,3-o-isopropylidenepropane is the key step. On the other hand, hydrolysis of 1-(3-benzo[b]furanyloxy)-2,3-o-isopropylidenepropane to the corresponding diol, in order to obtain a furanic isoster of Propranolol (17a ), was unsuccessful.     

Design and optimization of on-chip capillary electrophoresis

We present a systematic, experimentally validated method of designing electrokinetic injections for on-chip capillary electrophoresis applications. This method can be used to predict point-wise and charge-coupled device (CCD)-imaged electropherograms using estimates of species mobilities, diffusivities and initial sample plug parameters. A simple Taylor dispersion model is used to characterize electrophoretic separations in terms of resolution and signal-to-noise ratio (SNR). Detection convolutions using Gaussian and Boxcar detector response functions are used to relate optimal conditions for resolution and signal as a function of relevant system parameters including electroosmotic mobility, sample injection length, detector length scale, and the length-to-detector. Analytical solutions show a tradeoff between signal-to-noise ratio and resolution with respect to dimensionless injection width and length to the detector. In contrast, there is no tradeoff with respect to the Peclet number as increases in Peclet number favor both SNR and separation solution (R). We validate our model with quantitative epifluorescence visualizations of electrophoretic separation experiments in a simple cross channel microchip. For the pure advection regime of dispersion, we use numerical simulations of the transient convective diffusion processes associated with electrokinetics together with an optimization algorithm to design a voltage control scheme which produces an injection plug that has minimal advective dispersion. We also validate this optimal injection scheme using fluorescence visualizations. These validations show that optimized voltage scheme produces injections with a standard deviation less than one-fifth of the width of the microchannel.     

A pyrimidine thiolate Rh(I) complex: structure, bonding and one-dimensional interactions in solid and in solution

The reaction of [Rh(micro-Cl)(COD)]2 with 4,6-dimethyl-pyrimidinethiolate (Me2-pymt) and subsequent substitution of COD by CO yields [Rh(Me2-pymt)(CO)2]. The stacking pattern found in this compound is in contradiction with previously studied comparable square-planar complexes of type d8-[M(chelate)(monodentate)2] in which each ligand has different pi-acidic character. A theoretical study of the intermolecular interactions and conformation of the title compound has been carried out, combining semi-empirical band calculations on the real chains and ab initio(MP2 level) calculations on a model dimer. The combination of electronic and steric effects determines the rotation of the successive monomers and the deviation from linearity of the one-dimensional stacks. Its behaviour in solution is also special, developing a blue colour and forming micelles, when adding water to acetone solutions.     

Characterization of three agave species by gas chromatography and solid-phase microextraction-gas chromatography-mass spectrometry

Steam distillation (SD) extraction-solid-phase microextraction coupled to GC-MS was developed for the determination of terpenes and Bligh-Dyer extraction-derivatization coupled with GC for the determination of fatty acids such as ethyl esters were used. It was found that the three different Agave species have the same profile of fatty acids; the quantity of these compounds is different in each Agave variety. On the other hand, different terpenes were identified in the three Agave plants studied: nine in A. salmiana, eight in A. angustifolia and 32 in A. tequilana Weber var. azul.     

NADH Electrooxidation Using Bis(1,10-phenanthroline-5,6-dione) (2,2'-bipyridine)ruthenium(II)-Exchanged Zirconium Phosphate Modified Carbon Paste Electrodes

We present a carbon paste electrode (CPE) modified using the electron mediator bis(1,10‐phenanthroline‐5,6‐dione)(2,2′‐bipyridine)ruthenium(II) ([Ru(phend)₂bpy]²⁺) exchanged into the inorganic layered material zirconium phosphate (ZrP). X‐Ray powder diffraction showed that the interlayer distance of ZrP increases upon [Ru(phend)₂bpy]²⁺ intercalation from 10.3 Å to 14.2 Å. The UV‐vis and IR spectroscopies results showed the characteristic peaks expected for [Ru(phend)₂bpy]²⁺. The UV‐vis spectrophotometric results indicate that the [Ru(phend)₂bpy]²⁺ concentration inside the ZrP layers increased as a function of the loading level. The exchanged [Ru(phend)₂bpy]²⁺ exhibited luminescence even at low concentration. Modified CPEs were constructed and analyzed using cyclic voltammetry. The intercalated mediator remained electroactive within the layers (E°′=–38.5 mV vs. Ag/AgCl, 3.5 M NaCl) and electrocatalysis of NADH oxidation was observed. The kinetics of the modified CPE shows a Michaelis–Menten behavior. This CPE was used for the oxidation of NADH in the presence of Bakers' yeast alcohol dehydrogenase. A calibration plot for ethanol is presented.     

The crystal structure of eudesma-4(15),7(11)-dien-8α, 12-olide: a sesquiterpene lactone fromTrattinickia rhoifolia Willd

The title compound, formula C₁₅H₂₀O₂, is orthorhombic, P2₁2₁2₁ witha=8.747(2),b=12.025(3),c=12.554(3)Å,Z=4, andD _m =1.32(2)g/ml. The structural analysis shows that the compound corresponds to eudesma-4(15),7(11)-dien-8,12-olide, a sesquiterpene lactone previously isolated fromAster umbellatus but whose crystal structure was unknown.     

Polarization of the Electrical Double Layer. Time Evolution after Application of an Electric Field

Electrophoresis is one of the electrokinetic phenomena most widely investigated, both from a fundamental point of view and as a research tool in academia and industry. However, the dependence between electrophoretic mobility and zeta potential is, in a general case, far from simple, because of the many physical processes involved. In this work, we first describe qualitatively and (in some cases) quantitatively the time behavior of the dipole moment induced in the electrical double layer by an applied electric field. Further, a simple relationship is deduced between the dipole moment and the electrophoretic mobility. Through the analysis of the time dependence of the former, it is possible to resolve the different contributions to the stationary values of the mobility. Three characteristic relaxation times are distinguished in the time evolution of the dipole moment: tau(H) (the time needed for hydrodynamic flows to be established), tau(MW) (time for ionic electromigration to develop), and tau(VD) (after this time, diffusion flows are established in the system, and the double layer polarization is complete). This means that different mechanisms are operating on the double layer for different times after the application of the field, and that computing the mobility at such different times is equivalent to calculating the steady-state electrophoretic mobility under different approximations. A comparison is shown between estimated and computed mobility values as functions of time and of zeta potential, confirming the validity of the asymptotic calculations. Copyright 2000 Academic Press.     

Continuous chirality measures in transition metal chemistry

The definition of the continuous chirality measure(CCM) is provided and its applications are summarized in this tutorial review, with special emphasis on the field of transition metal complexes. The CCM approach, developed in recent years, provides a quantitative parameter that evaluates the degree of chirality of a given molecule. Many quantitative structural correlations with chirality have been identified for most of the important families of metal complexes. Our recent research has shown that one can associate the chirality measures with, e.g., enantioselectivity in asymmetric catalysis. We also explore a fragment approach to chirality in which we investigate which part of a molecule is responsible for the chirality-associated properties of a given family of compounds.     

Comprehensive study of the methyl effect on the solvolysis rates of bridgehead derivatives

The effect of a bridgehead methyl group on the hydride ion affinity in the gas phase of bicyclo[1.1.1]pent-1-yl (1+), 1-norbornyl (3+), cubyl (5+), 1-adamantyl (7+), bicyclo[2.2.2]oct-1-yl (9+),and bicyclo[3.1.1]hept-1-yl (11+) cations has been studied using density functional theory and ab initio methods. It is concluded that the methyl group always increases the stability of the substituted cations. The effect of the solvent on the stability of methyl-substituted cations in relation to the unsubstituted cations has been studied using the polarizable continuum model of the self-consistent reaction field theory. In the case of rearranging cations, the nucleophilic assistance of the solvent is determined by means of the interaction energy of the corresponding water complexes. It is concluded that the solvent causes the relative stabilization of the parent cations. As a consequence, most of the methyl-substituted bridgehead derivatives show a lower solvolysis rate than the corresponding unsubstituted compounds. A nonqualitative explanation of the methyl effect on the relative stability of bridgehead cations in both gas phase and solution is given for the first time. The ratios of solvolysis products in the case of rearranging bridgehead cations have also been computed from the relative stability of the intermediate water complexes.