Crystal structure of the quaternary compound CuTa2InTe4 from X-ray powder diffraction

The crystal structure of the new quaternary compound CuTa₂InTe₄ was studied using X-ray powder diffraction data. The powder pattern refined by the Rietveld method indicates that this material crystallizes in the tetragonal system with space group I-4¯2m (No. 121), Z=2, and unit cell parameters a=6.1963(2) Å, c=12.4164(4) Å, c/a=2.00 and V=476.72(3) Å³. The structural and instrumental refinement of 28 parameters led to R_p=10.4%, R_wp=11.1%, R_exp=6.8% and χ²=2.7 for 96 independent reflections.     

Synthesis, photochemistry, and electrochemistry of single-wall carbon nanotubes with pendent pyridyl groups and of their metal complexes with zinc porphyrin. Comparison with pyridyl-bearing fullerenes

A soluble, functionalized Py-SWNT has been synthesized and characterized by solution (1)H and (13)C NMR, FT-Raman, and electron microscopy. Experimental data indicate that Py-SWNT has short tubes with pentyl esters at the tips and pyridyl isoxazolino units along the walls. The synthesis of Py-SWNT is based on a 1,3-dipolar cycloaddition of a nitrile oxide on the SWNT walls, similar to 1,3-dipolar cycloadditions that are common for fullerene functionalization. The resulting Py-SWNT forms a complex with a zinc porphyrin (ZnPor) in a way similar to that reported for pyridyl-functionalized [60]-fullerenes. Formation of this metal-ligand complex was firmly established by a detailed electrochemical study. However, in contrast to the behavior observed for the ZnPor/Py-C(60) complex, photochemical excitation of the complex between ZnPor/Py-SWNT does not lead to electron transfer with the generation of charge-separated states. Fluorescence and laser flash studies indicate that the main process is energy transfer from the singlet ZnPor excited state to the Py-SWNT with observation of emission from Py-SWNT. Triplet ZnPor excited-state quenching by Py-SWNT is only observed in polar solvents such as DMF, but not in benzonitrile.     

Electrical conductivity and luminescence in coordination polymers based on copper(I)-halides and sulfur-pyrimidine ligands

The solvothermal reactions between pyrimidinedisulfide (pym(2)S(2)) and CuI or CuBr(2) in CH(2)Cl(2):CH(3)CN lead to the formation of [Cu(11)I(7)(pymS)(4)](n) (pymSH = pyrimidine-2(1H)-thione) (1) and the dimer [Cu(II)(μ-Br)(Br)L](2) (L = 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde) (2). In the later reaction, there is an in situ S-S, S-C(sp(2)), and C(sp(2))-N multiple bond cleavage of the pyrimidinedisulfide resulting in the formation of 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde. Interestingly, similar reactions carried out just with a change in the solvent (H(2)O:CH(3)CN instead of CH(2)Cl(2):CH(3)CN) give rise to the formation of coordination polymers with rather different architectures. Thus, the reaction between pym(2)S(2) and CuI leads to the formation of [Cu(3)I(pymS)(2)](n) (3) and [CuI(pym(2)S(3))] (pym(2)S(3) = pyrimidiltrisulfide) (4), while [Cu(3)Br(pymS)(2)](n) (5) is isolated in the reaction with CuBr(2). Finally, the solvothermal reactions between CuI and pyrimidine-2-thione (pymSH) in CH(2)Cl(2):CH(3)CN at different ratios, 1:1 or 2:1, give the polymers [Cu(2)I(2)(pymSH)(2)](n) (6) and [Cu(2)I(2)(pymSH)](n) (7), respectively. The structure of the new compounds has been determined by X-ray diffraction. The studies of the physical properties of the novel coordination polymers reveal that compounds 3 and 5 present excellent electrical conductivity values at room temperature, while compounds 1, 3, and 5-7 show luminescent strong red emission at room temperature.     

Design and optimization of on-chip capillary electrophoresis

We present a systematic, experimentally validated method of designing electrokinetic injections for on-chip capillary electrophoresis applications. This method can be used to predict point-wise and charge-coupled device (CCD)-imaged electropherograms using estimates of species mobilities, diffusivities and initial sample plug parameters. A simple Taylor dispersion model is used to characterize electrophoretic separations in terms of resolution and signal-to-noise ratio (SNR). Detection convolutions using Gaussian and Boxcar detector response functions are used to relate optimal conditions for resolution and signal as a function of relevant system parameters including electroosmotic mobility, sample injection length, detector length scale, and the length-to-detector. Analytical solutions show a tradeoff between signal-to-noise ratio and resolution with respect to dimensionless injection width and length to the detector. In contrast, there is no tradeoff with respect to the Peclet number as increases in Peclet number favor both SNR and separation solution (R). We validate our model with quantitative epifluorescence visualizations of electrophoretic separation experiments in a simple cross channel microchip. For the pure advection regime of dispersion, we use numerical simulations of the transient convective diffusion processes associated with electrokinetics together with an optimization algorithm to design a voltage control scheme which produces an injection plug that has minimal advective dispersion. We also validate this optimal injection scheme using fluorescence visualizations. These validations show that optimized voltage scheme produces injections with a standard deviation less than one-fifth of the width of the microchannel.     

FTIR spectroscopic and computational studies on hydrogen adsorption on the zeolite Li-FER

The interaction, at a low temperature, between molecular hydrogen and the zeolite Li-FER was studied by means of variable temperature infrared spectroscopy and theoretical calculations using a periodic DFT model. The adsorbed dihydrogen molecule becomes infrared active, giving a characteristic IR absorption band (H-H stretching) at 4090 cm(-1). Three different Li(+) site types with respect to H(2) adsorption were found in the zeolite, two of which adsorb H(2). Calculations showed a similar interaction energy for these two sites, which was found to agree with the experimentally determined value of standard adsorption enthalpy of DeltaH(0) = -4.1 (+/-0.8) kJ mol(-1). The results are discussed in the broader context of previously reported data for H(2) adsorption on Na-FER and K-FER.     

Colloidal stability of magnetite/poly(lactic acid) core/shell nanoparticles

In this work, we describe an experimental investigation on the colloidal stability of suspensions of three kinds of particles, including magnetite, poly(lactic acid) (PLA), and composite core/shell colloids formed by a magnetite core surrounded by a PLA shell. The experiments were performed with dilute suspensions, so that recording the optical absorbance with time gives a suitable indication of the aggregation and sedimentation of the suspensions. The method allowed us to distinguish very accurately between the different surface and magnetic forces responsible for the structures acquired by particle aggregates. Thus, the pure PLA suspensions are very sensitive to ionic strength and almost unaffected by pH changes. On the contrary, the stability of magnetite systems is mainly controlled by pH. The effect of vertical magnetic fields on the stability of magnetite and magnetite/PLA suspensions is also investigated. The PLA shell reduces the magnetic responsiveness of magnetite, but it is demonstrated that the mixed particles can also form structures induced by the field, despite their lower magnetization, and they can be considered in magnetically targeted biomedical applications.     

New supported beta-amino alcohols as efficient catalysts for the enantioselective addition of diethylzinc to benzaldehyde under flow conditions

[formula: see text] Polymeric monoliths 10 containing an amino alcohol moiety derived from an industrial waste material represent one of the best ligands for the enantioselective catalytic addition of ZnEt2 to benzaldehyde (99% ee), being recoverable and usable under flow conditions.     

Capillary electrophoresis as an alternative to HPLC for determination of honey flavonoids

Summary The general objective is to provide an alternative methodology based on capillary electrophoresis (CE) to characterize flavonoids from honey and hence determine its botanical origin. The specific objective is to compare the separation of flavonoids by CE with those achieved by HPLC to assess CE as an alternative technique for the determination of honey flavonoids. Fourteen different flavonoids isolated from honey were analysed by MECC and compared to the HPLC separations. It was difficult to find specific experimental conditions to separate all the flavonoids from honey in a single MEKC run. Three chromatographic conditions are optimized and, depending on the flavonoid markers sought in honey, the appropriate detection method should be chosen. Compared to the HPLC results, it is clear that CE could be an alternative technique in honey flavonoids analysis and particularly in the study of its geographical and floral origin.