Physical transitions and crystallization phenomena in poly(ethylene terephthalate) studied by microhardness

The crystallization behavior of poly(ethylene terephthalate) both with and without sodium montanate, a crystal nucleating agent, has been studied using the microhardness technique. The kinetics of crystallization from the glassy state were investigated in real time by measuring the microhardness H at different crystallization temperatures. Results are discussed in terms of the Avrami equation. Values of the Avrami exponent n of about 3 are observed for samples irrespective of nucleating agent. For samples with nucleant two crystallization ranges are observed: a first range which corresponds to a fast crystallization from nucleating agent particles and a second range which is associated with a slow self-crystallization mode. New transitions evidenced by the presence of a small maximum in H as a function of annealing time and temperature are detected at temperatures above T_g for physically aged samples. The kinetics of this transition have also been examined. It is further shown that the presence of nucleating agent induces a hardening at room temperature which is similar to the effect produced by the physical aging of the samples below T_g. Finally, it is found that aging reduces the rate of creep of the material under the indenter. © 1993 John Wiley & Sons, Inc.     

Development of an HPLC-fluorescence determination method for carboxylic acids related to the tricarboxylic acid cycle as a metabolome tool

We report the simultaneous determination of the carboxylic acids related to the tricarboxylic acid (TCA) cycle, which plays an important role in producing adenosine triphosphate (ATP) and generating energy in mitochondria. Seven carboxylic acids from the TCA cycle, and pyruvic acid and 2-methylsuccinic acid, as an internal standard, were derivatized with a fluorescent reagent for carboxyl groups, 4-N,N-dimethylaminosulfonyl-7-piperazino-2,1,3-benzoxadiazole (DBD-PZ), in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and 4-N,N-dimethyaminopyridine as the coupling reagents, at 60 degrees C for 120 min. Subsequently, the excess DBD-PZ was removed efficiently using a cation-exchange cartridge, SDB-RPS (Empore). These fluorescent derivatives were separated well from each other on an octadecyl silica column (TSKgel ODS-80Ts, 250 x 4.6 mm, i.d.) with an eluent of acetonitrile-water containing 1% formic acid at a flow rate of 0.8 mL/min, and were detected fluorometrically at 560 nm, with excitation at 450 nm. The validation data were satisfactory in the range of 2.5-100 microm citric acid, isocitric acid, 2-oxoglutaric acid, succinic acid and fumaric acid. The detection limit (S/N = 3) for citric acid was 2 fmol on the column. The structures of these derivatives were confirmed by high-performance liquid chromatography-mass spectrometry, which proved that their carboxylic groups were completely labeled with DBD-PZ, except for oxaloacetic acid. This HPLC method was successfully applied to the analysis of TCA cycle metabolites in rat urine. The method will also be useful for metabolome research, such as for target analyses of metabolites with carboxyl groups, not only in urine but also in cells and organs.     

Determination of the geometry change of the phenol dimer upon electronic excitation.

The change of the phenol dimer (PH2) structure upon electronic excitation is determined by a Franck-Condon analysis of the intensities in the fluorescence emission spectra obtained via excitation of seven different vibronic bands. A total of 547 emission band intensities are fitted, together with the changes of rotational constants upon electronic excitation of fi ve isotopomers. These rotational constants are taken from previously published [Schmitt et al. ChemPhysChem 2006, 7, 1241-1249] high-resolution LIF measurements. The geometry change upon electronic excitation of the pipi* state of the donor moiety can be described by a strong shortening of the hydrogen bond, a shortening of the CO bond in the donor moiety, an overall symmetric expansion of the donor phenol ring, and a nearly unchanged acceptor moiety. The resulting geometry changes are interpreted on the basis of ab initio calculations.     

Fluorescence on-off switching mechanism of benzofurazans

Many fluorescent reagents with a benzofurazan (2,1,3-benzoxadiazole) skeleton have been developed and widely used in bio-analyses. In this study, we try to elucidate the fluorescence on-off switching mechanism of three fluorogenic reagents and their derivatives. Ten 4,7-disubstituted benzofurazans were used for this purpose and the measurements of their fluorescence, phosphorescence, photolysis, and time-resolved thermal lensing signal in acetonitrile were obtained in order to understand the relaxation processes of these compounds. These results indicate that the competition of fluorescence with a fast intersystem crossing or fast photoreaction plays a key role in the fluorescence on-off switching. Semi-empirical molecular orbital calculations show that the existence of the triplet n pi* state is responsible for the fast intersystem crossing while the proximity of the reactive second single pi pi* state to the first singlet pi pi* state contributes to the fast photoreaction in the excited states.     

Synthesis of crosslinked resin based on methacrylamide, styrene and divinylbenzene obtained from polymerization in aqueous suspension

A series of porous copolymer beads based on methacrylamide (MA), styrene and divinylbenzene (DVB) was prepared by aqueous suspension polymerization in the presence of diluents to act as precipitants. As MA is totally soluble into aqueous phase, the use of two types of phase transfer agent was investigated, namely: TritonX-100^TM [polyoxyethylene-(10)-isooctylphenyl-ether] and tetrabutylammonium perchlorate. The effect of the diluents on the surface appearance and the porous structure of copolymer beads was studied. Suitable particle stabilisation was achieved by using a combination of two suspension agents, namely: gelatin and 2-hydroxy-ethyl-cellulose. The network resins were characterized by optical and scanning electron microscopy, IR spectroscopy, elemental analysis (CHN), apparent density, swelling in different solvents and specific area by BET method. It was observed that the MA incorporation was more effective when Triton^TM was employed as phase transfer agent.     

Synthesis and fluorescent properties of bi- and tricyclic 4-N-carbamoyldeoxycytidine derivatives

New bi- and tricyclic deoxycytidine derivatives (dChpd, dCmpp, dCtpp, dCppp) were synthesized as analogues of a fluorescent nucleoside, dChpp, previously reported. The carbamoyl group of dChpd and the 5-position of the cytosine ring are bridged via an ethylene linker so that the modified group forms a nonplanar structure with the cytosine ring. The fluorescent study of dChpd indicated that the coplanar structure between the carbamoyl group and the cytosine ring is of importance. N-Methylation of the carbamoyl group (dCmpp) weakened the intensity of the fluorescence of dChpp, and the derivative (dCtpp), which had a thiocarbamoyl group, lost its fluorescent property. Moreover, addition of a pyrrolo-ring (dCppp) to dChpp enhanced the intensity of fluorescence, and an emission light was observed with a marked Stokes shift of 120 nm.     

Structural studies of two Tinuvin P analogs: 2-(2,4-dimethylphenyl)-2H-benzotriazole and 2-phenyl-2H-benzotriazole

2-(2,4-Dimethylphenyl)-2H-benzotriazole (1) has been synthesized in a three step procedure starting from 2,4-dimethyl-N-(2-nitrophenyl)benzamide via a 5-(2,4- dimethylphenyl)-1-(2-nitrophenyl)-1H-tetrazole intermediate. Its structure and those of Tinuvin P and 2-phenyl-2H-benzotriazole (5) have been studied by multinuclear NMR (1H-, 13C- and 15N-) in solution and in the solid state. X-ray diffraction analysis of 1 and 5 allowed to us establish the molecular conformation around the single bond connecting the two aromatic systems, in agreement with the conclusions drawn from the NMR study. In the case of 1 ab initio geometry optimization was achieved at the Hartree-Fock HF/6- 31G** and DFT B3LYP/6-31G** levels.     

Analysis of organic acid markers relevant to inherited metabolic diseases by ultra-performance liquid chromatography/tandem mass spectrometry as benzofurazan derivatives

We describe a new approach applicable to the determination of organic acids that serve as diagnostic markers for several inherited metabolic disorders. We utilized liquid chromatography/tandem mass spectrometry for analysis of organic acid derivatives of a recently described benzofurazan reagent. The derivatization step was necessary to obtain organic acid derivatives suitable for analysis by reversed-phase liquid chromatography with high ionization efficiency for mass spectrometry in the positive-ion mode. In this work, a group of related dicarboxylic acid markers containing five or six carbon atoms were analyzed and validation was performed for glutaric and 3-hydroxyglutaric acids, the specific markers for glutaric acidemia type 1. Derivatization was achieved by reacting untreated urine with the derivatization reagent under mild conditions. The reaction mixture was analyzed on a C18 ultra-performance liquid chromatography (UPLC) column (50x2.1 mm, 1.7 microm) and detected in the multiple reaction monitoring mode in 5 min. Calibration curves were linear up to at least 1000 microM with detection limits for glutaric and 3-hydroxyglutaric acids of 0.025 and 0.02 microM, respectively (signal-to-noise ratio of 3). Intra-day (n=11) and inter-day (n=6) coefficients of variation were better than 11.2%. The assay was successfully applied to control (n=134) and glutaric acidemia type 1 (n=55) urine samples.     

Quantifying weak hydrogen bonding in uracil and 4-cyano-4'-ethynylbiphenyl: a combined computational and experimental investigation of NMR chemical shifts in the solid state

Weak hydrogen bonding in uracil and 4-cyano-4'-ethynylbiphenyl, for which single-crystal diffraction structures reveal close CH...O=C and C[triple bond]CH...N[triple bond]C distances, is investigated in a study that combines the experimental determination of 1H, 13C, and 15N chemical shifts by magic-angle spinning (MAS) solid-state NMR with first-principles calculations using plane-wave basis sets. An optimized synthetic route, including the isolation and characterization of intermediates, to 4-cyano-4'-ethynylbiphenyl at natural abundance and with 13C[triple bond]13CH and 15N[triple bond]C labeling is described. The difference in chemical shifts calculated, on the one hand, for the full crystal structure and, on the other hand, for an isolated molecule depends on both intermolecular hydrogen bonding interactions and aromatic ring current effects. In this study, the two effects are separated computationally by, first, determining the difference in chemical shift between that calculated for a plane (uracil) or an isolated chain (4-cyano-4'-ethynylbiphenyl) and that calculated for an isolated molecule and by, second, calculating intraplane or intrachain nucleus-independent chemical shifts that quantify the ring current effects caused by neighboring molecules. For uracil, isolated molecule to plane changes in the 1H chemical shift of 2.0 and 2.2 ppm are determined for the CH protons involved in CH...O weak hydrogen bonding; this compares to changes of 5.1 and 5.4 ppm for the NH protons involved in conventional NH...O hydrogen bonding. A comparison of CH bond lengths for geometrically relaxed uracil molecules in the crystal structure and for geometrically relaxed isolated molecules reveals differences of no more than 0.002 A, which corresponds to changes in the calculated 1H chemical shifts of at most 0.1 ppm. For the C[triple bond]CH...N[triple bond]C weak hydrogen bonds in 4-cyano-4'-ethynylbiphenyl, the calculated molecule to chain changes are of similar magnitude but opposite sign for the donor 13C and acceptor 15N nuclei. In uracil and 4-cyano-4'-ethynylbiphenyl, the CH hydrogen-bonding donors are sp2 and sp hybridized, respectively; a comparison of the calculated changes in 1H chemical shift with those for the sp3 hybridized CH donors in maltose (Yates et al. J. Am. Chem. Soc. 2005, 127, 10216) reveals no marked dependence on hybridization for weak hydrogen-bonding strength.     

A Mechanistic Overview of the Current Status and Future Challenges in Air Cathode for Aluminum Air Batteries

Aluminum air batteries (AABs) are a desirable option for portable electronic devices and electric vehicles (EVs) due to their high theoretical energy density (8100 Wh K⁻¹), low cost, and high safety compared to state-of-the-art lithium-ion batteries (LIBs). However, numerous unresolved technological and scientific issues are preventing AABs from expanding further. One of the key issues is the catalytic reaction kinetics of the air cathode as the fuel (oxygen) for AAB is reduced there. Additionally, the performance and price of an AAB are directly influenced by an air electrode integrated with an oxygen electrocatalyst, which is thought to be the most crucial element. In this study, we covered the oxygen chemistry of the air cathode as well as a brief discussion of the mechanistic insights of active catalysts and how they catalyze and enhance oxygen chemistry reactions. There is also extensive discussion of research into electrocatalytic materials that outperform Pt/C such as nonprecious metal catalysts, metal oxide, perovskites, metal-organic framework, carbonaceous materials, and their composites. Finally, we provide an overview of the present state, and possible future direction for air cathodes in AABs.