Effect of diffraction on the electrodynamic characteristics of two-dimensional coaxial Bragg resonators

The electrodynamic properties of coaxial two-dimensional Bragg resonators with two-dimensional distributed feedback are analyzed. These resonators are made of coaxial waveguide sections with doubly periodic corrugation, which provides coupling and mutual scattering of four partial waves. Two of them propagate along the waveguide, while the other two propagate in the transverse (azimuthal) direction. It is shown that the high azimuthal index selectivity of two-dimensional Bragg resonators may be related to a qualitative difference in topology of the dispersion characteristics of azimuth-symmetric and asymmetric normal waves propagating in infinite waveguides of such a geometry. For the finite-length systems used as two-dimensional Bragg resonators, the eigenmode spectrum is found for two types of boundary conditions that correspond to the limiting cases of perfectly matched (open) systems and, conversely, of systems closed for the extraction of transverse electromagnetic fluxes. Perimeter-to-length ratios of the resonator at which the Q factor of the fundamental azimuth-symmetric mode is greater than those of the other modes are determined. The applicability domain of the geometrical approach, which was earlier applied to two-dimensional Bragg resonators, is discussed.     

Axisymmetric Collision Problem for Two Identical Elastic Solids of Revolution

A direct central collision of two identical bodies of revolution is studied. A nonstationary mixed boundary-value problem with an unknown moving boundary is formulated. Its solution is represented by a series in term of Bessel functions. An infinite system of Volterra equations of the second kind for the unknown expansion coefficients is derived by satisfying the boundary conditions. The basic characteristics of the collision process are determined depending on the curvature of the frontal surface of the bodies     

Shape sensitivity of a plane crack front

The 3D‐elasticity model of a solid with a plane crack under the stress‐free boundary conditions at the crack is considered. We investigate variations of a solution and of energy functionals with respect to perturbations of the crack front in the plane. The corresponding expansions at least up to the second‐order terms are obtained. The strong derivatives of the solution are constructed as an iterative solution of the same elasticity problem with specified right‐hand sides. Using the expansion of the potential and surface energy, we consider an approximate quadratic form for local shape optimization of the crack front defined by the Griffith criterion. To specify its properties, a procedure of discrete optimization is proposed, which reduces to a matrix variational inequality. At least for a small load we prove its solvability and find a quasi‐static model of the crack growth depending on the loading parameter. Copyright © 2003 John Wiley & Sons, Ltd.     

Chaos-controlling technique for suppressing self-modulation in backward-wave tubes

A method for suppressing self-modulation in backward-wave tubes is proposed. Additional delay is introduced into the feedback circuit, owing to which the output signal amplitude affects the electron beam current that enters into the interaction space. Numerical simulations demonstrate that the operating current in the single-frequency oscillation mode may be increased roughly twofold.     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

Improved tabu search algorithm for the handling of route duration constraints in vehicle routing problems with time windows

This note introduces a refinement to a previously proposed tabu search algorithm for vehicle routing problems with time windows. This refinement yields new best known solutions on a set of benchmark instances of the multi-depot, the periodic and the site-dependent vehicle routing problems with time windows.     

Stratifiable Families of Extremals and Sufficient Conditions for Optimality in Optimal Control Problems

It is shown that, if a parametrized fämily of extremals F can be stratified in a way compatible with the flow map generated by F, then those trajectories of the family which realize the minimal values of the cost in F are indeed optimal in comparison with all trajectories which lie in the region R covered by the trajectories of F. It is not assumed that F is a field covering the state space injectively. As illustration, an optimal synthesis is constructed for a system where the flow of extremals exhibits a simple cusp singularity.     

CuPc molecules adsorbed on Au(1 1 0)-(1 × 2): growth morphology and evolution of valence band states

We present the growth morphology, the long-range ordering, and the evolution of the valence band electronic states of ultrathin films of copper phthalocyanine (CuPc) deposited on the Au(1 1 0)-(1 × 2) reconstructed surface, as a function of the organic molecule coverage. The low energy electron diffraction patterns present a (5 × 3) reconstruction from the early adsorption stages. High-resolution UV photoelectron spectroscopy data show the disappearance of the Au surface states related to the (1 × 2) reconstruction, and the presence of new electronic features related to the molecule-substrate interaction and to the CuPc molecular states. The CuPc highest occupied molecular orbital gradually emerges in the valence band, while the interface electronic states are quenched, upon increasing the coverage.     

Asymptotic stability, ergodicity and other asymptotic properties of the nonlinear filter

In this work we study connections between various asymptotic properties of the nonlinear filter. It is assumed that the signal has a unique invariant probability measure. The key property of interest is expressed in terms of a relationship between the observation σ field and the tail σ field of the signal, in the stationary filtering problem. This property can be viewed as the permissibility of the interchange of the order of the operations of maximum and countable intersection for certain σ-fields. Under suitable conditions, it is shown that the above property is equivalent to various desirable properties of the filter such as

(a) uniqueness of invariant measure for the signal,

(b) uniqueness of invariant measure for the pair (signal, filter),

(c) a finite memory property of the filter,

(d) a property of finite time dependence between the signal and observation σ fields and

(e) asymptotic stability of the filter.

Previous works on the asymptotic stability of the filter for a variety of filtering models then identify a rich class of filtering problems for which the above equivalent properties hold.