Quantification of oxyresveratrol analog trans-2,4,3',5'-tetramethoxystilbene in rat plasma by a rapid HPLC method: application in a pre-clinical pharmacokinetic study

A rapid HPLC method was developed and validated for the quantification of oxyresveratrol analog trans‐2,4,3′,5′‐tetramethoxystilbene (oxyresveratrol tetramethyl ether, OTE) in rat plasma. Chromatographic separation was achieved on an RP‐HPLC column, which was protected by a guard column through a 12 min gradient delivery of a mixture of acetonitrile–water at 50°C. The UV absorbance at 325 nm was recorded. The retention time of OTE and trans‐stilbene (internal standard) was about 7.7 and 8.4 min, respectively. The calibration curves were linear (R² ≥ 0.9986) with a lower limit of quantification of 15 ng/mL. The intra‐ and inter‐day variations, in terms of RSD, were all lower than 9.8% while the intra‐day and inter‐day bias ranged from ?8.3 to +9.2%. The pharmacokinetics of OTE was assessed in rats using 2‐hydroxypropyl‐β‐cyclodextrin as a dosing vehicle. After intravenous administration, OTE possessed a long terminal elimination half‐life (t_{1/2 λz} = 481 ± 137 min) and slow clearance (Cl = 29.1 ± 3.7 mL/min/kg). Upon oral administration, OTE was rapidly absorbed. However, it only displayed minimal plasma exposure and its absolute oral bioavailability (F) was as low as 4.5 ± 3.2%. Fortunately, the levels of OTE after single oral administration were sufficient to inhibit human cytochrome P450 1B1. Copyright © 2010 John Wiley & Sons, Ltd.     

Electronic parameters and electronic structures in modulation-doped highly strained InxGa1−xAs/InyAl1−yAs coupled double quantum wells

Electronic parameters of a two-dimensional electron gas (2DEG) in modulation-doped highly strained In_xGa_1−xAs/In_yAl_1−yAs coupled double quantum wells were investigated by performing Shubnikov-de Haas (S-dH), Van der Pauw Hall-effect, and cyclotron resonance measurements. The S-dH measurements and the fast Fourier transformation results for the S-dH at 1.5 K indicated the electron occupation of two subbands in the quantum well. The electron effective masses of the 2DEG were determined from the cyclotron resonance measurements, and satisfied qualitatively the nonparabolicity effects in the quantum wells. The electronic subband structures were calculated by using a self-consistent method.     

Au nanowire-on-film SERRS sensor for ultrasensitive Hg2+ detection

We report an ultrasensitive and selective single nanowire-on-film (SNOF) surface-enhanced resonance Raman scattering (SERRS) sensor for Hg(2+) detection based on structure-switching double stranded DNAs (dsDNAs). Binding of Hg(2+) induces conformational changes of the dsDNAs and let a Raman reporter get close to the SNOF structure, thereby turning on SERRS signal. The well-defined SNOF structure provides a detection limit of 100 pM with improved accuracy in Hg(2+) detection. This sensor is stable over a considerable amount of time and reusable after simple treatment. Since this SNOF sensor is composed of a single Au NW on a film, development of a multiplex sensor would be possible by employing NWs modified by multiple kinds of aptamers.     

Pep-1 Peptide-modified liposomal carriers for intracellular delivery of gold nanoparticles

A Pep-1 peptide-modified liposomal (Pep1-Lipo) carrier system was investigated to increase the intracellular delivery of gold nanoparticles (Au NPs). Au NPs with a mean diameter of 13 nm were successfully encapsulated into the inner aqueous compartment of the novel carrier using an ethanol injection technique, reserving the distinctive optical characteristics of the surface plasmon resonance peak around 530 nm. The Au NP-loaded liposomal carrier was physically characterized as 150-170 nm in size and 45 mV in zeta potential. Dark field microscopic observation demonstrated that in vitro cellular association and/or translocation of the nanoprobes into the cells was increased by Pep1-Lipo carriers compared to bare Au NPs. In conclusion, this novel liposomal formulation is a promising platform for the intracellular delivery of metallic nanoprobes including Au NPs.     

Preparation of submicron‐scale,electrospun cellulose fibers via direct dissolution

Cellulose nonwoven mats of submicron‐sized fibers (150 nm–500 nm in diameter) were obtained by electrospinning cellulose solutions. A solvent system based on lithium chloride (LiCl) and N,N‐dimethylacetamide (DMAc) was used, and the effects of (i) temperature of the collector, (ii) type of collector (aluminum mesh and cellulose filter media), and (iii) postspinning treatment, such as coagulation with water, on the morphology of electrospun fibers were investigated. The scanning electron microscopy (SEM) and X‐ray diffraction studies of as‐spun fibers at room temperature reveal that the morphology of cellulose fibers evolves with time due to moisture absorption and swelling caused by the residual salt and solvent. Although heating the collector greatly enhances the stability of the fiber morphology, the removal of salt by coagulation and DMAc by heating the collector was necessary for the fabrication of dry and stable cellulose fibers with limited moisture absorption and swelling. The presence and removal of the salt before and after coagulation have been identified by electron microprobe and X‐ray diffraction studies. When cellulose filter media is used as a collector, dry and stable fibers were obtained without the coagulation step, and the resulting electrospun fibers exhibit good adhesion to the filter media. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1673–1683, 2005     

CO2 laser induced reactions of trichloroethylene

The pressure and laser-power dependence of the product distributions in the TEA CO₂ laser induced decomposition of trichloroethylene were studied. At moderate pressures molecular elimination of HCl to give CClCCl via intermolecular energy transfer was found to be the major reaction path. At low pressures a pure laser-induced CCl bond fission to give CHCCl was found to be the primary, reaction step.     

Flash vacuum pyrolysis of 1-propynoylpyrazoles: a new precursor of tricarbon monoxide

Pyrolysis of 3,5-dimethyl-1-propynoylpyrazole (1) at 640°C/0.1 torr gives 2-methyl-1$\text{H}$-pyrazolo[2,3-a]pyridin-5-one (3) with inversion of the propynoyl chain. 1-Ethynylpyrazole and tricarbon monoxide have been identified in pyrolysates formed at 700–1000°C/0.01–0.1 torr from the parent 1-propynoylpyrazole (4).     

Oxygen Vacancy Diffusion and Condensation in Lithium‐Ion Battery Cathode Materials

Oxygen vacancies (OV) are native defects in transition metal (TM) oxides and their presence has a critical effect on the physicochemical properties of the oxide. Metal oxides are commonly used in lithium‐ion battery (LIB) cathodes and there is still a lack of understanding of the role of OVs in LIB research field. Here, we report on the behavior of OVs in a single‐crystal LIB cathode during the non‐equilibrium states of charge and discharge. We found that microcrack evolution in a single crystal occurs due to OV condensation in specific crystallographic orientations generated by the continuous migration of OVs and TM ions. Moreover, understanding the effects of the presence and diffusion of OVs in metal oxides enables the elucidation of most of the conventional mechanisms of capacity fading in LIBs and provides new insights for new electrochemical applications.     

Optical implementation of a constant-time multicomparand bit-parallel magnitude-comparison algorithm using wavelength- and polarization-division multiplexing with application to parallel database processing

We present a word- and bit-parallel magnitude-comparison architecture that permits multiple comparands to be compared with multiple relations in constant time. The proposed magnitude-comparison algorithm uses a novel polarization and wavelength-encoding scheme to achieve a fast, scalable realization. Distinctive features of the proposed architecture include (1) the use of a multiple-wavelength encoding scheme to increase processing parallelism and (2) multiple-comparand word- and bit-parallel comparison with an execution time that is independent of the data or word size.     

New serotonin 5-HT(6) ligands from common feature pharmacophore hypotheses

Serotonin 5-HT6 receptor antagonists are thought to play an important role in the treatment of psychiatry, Alzheimer's disease, and probably obesity. To find novel and potent 5-HT6 antagonists and to provide a new idea for drug design, we used a ligand-based pharmacophore to perform the virtual screening of a commercially available database. A three-dimensional common feature pharmacophore model was developed by using the HipHop program provided in Catalyst software and was used as a query for screening the database. A recursive partitioning (RP) model which can separate active and inactive compounds was used as a filtering system. Finally a sequential virtual screening procedure (SQSP) was conducted, wherein both the common feature pharmacophore and the RP model were used in succession to improve the results. Some of the hits were selected based on druglikeness, ADME properties, structural diversity, and synthetic accessibility for real biological evaluation. The best hit compound showed a significant IC50 value of 9.6 nM and can be used as a lead for further drug development.