Generation of single-crystalline domain in nano-scale silicon pillars by near-field short pulsed laser

We observe laser-induced grain morphology change in silicon nanopillars under a transmission electron microscopy (TEM) environment. We couple the TEM with a near-field scanning optical microscopy pulsed laser processing system. This novel combination enables immediate scrutiny on the grain morphologies that the pulsed laser irradiation produces. We find unusual transformation of the tip of the amorphous or polycrystalline silicon pillar into a single crystalline domain via melt-mediated crystallization. On the basis of the three-dimensional finite difference simulation result and the dark field TEM data, we propose that the creation of the distinct single crystalline tip originates from the dominant grain growth initiated at the apex of the non-planar liquid–solid interface. Our microscopic observation provides a fundamental basis for laser-induced conversion of amorphous nanostructures into coarse-grained crystals.     

Relationship between liquid crystalline phase stability and ingredient composition in liquid crystal oil–water emulsion

In this study, we postulated that the optical retardation magnitude could be used to evaluate the stability of the LC phase through the Mueller matrix polarimeter method in LC emulsion. In addition, we found that the increase of cetearyl alcohol concentration induced the more periodic dense lattice structure in crystalline phase of LC lamellae and the sorbitan olivate was relatively more responsible for higher ordering in LC phase compared to C12–20 alkyl glucoside in terms of molecular parallel packing on the basis of the optical retardation magnitude. Furthermore, it was confirmed that the LC emulsion had higher skin barrier function owing to lower TEWL and higher reflectance than ordinary emulsion on human skin and maintained a uniform phase without phase separation for 8 weeks.     

Development of simultaneous analysis of tryptophan metabolites in serum and gastric juice – an investigation towards establishing a biomarker test for gastric cancer diagnosis

To evaluate changes in tryptophan metabolism and discover diagnostic biomarkers for gastric cancer, a quantitative method was developed for tryptophan and its seven metabolites (indole‐3‐lactic acid, anthranilic acid, serotonin, nicotinic acid, kynurenic acid, kynurenine and 3‐indoxyl sulfate) in both human serum and gastric juice using liquid chromatography–tandem mass spectrometry (LC–MS/MS). Serum and gastric juice were prepared with a simple protein precipitation using aqueous 0.1% formic acid and acetonitrile. As a result, it was found that the kynurenine pathway of tryptophan metabolism was activated in gastric cancer and that the metabolic ratio of kynurenine/tryptophan, which reflects the enzyme activity of indoleamine‐2,3‐dioxygenase, was associated with the observed metabolic changes. Finally, the investigation of tryptophan metabolites, especially kynurenic acid, in serum and gastric juice might serve as biomarkers for gastric cancer. The findings in this study provide critical information of tryptophan metabolism which can be applied to a serum‐based diagnostic test for gastric cancer.     

Actuation design for high‐performance shape memory polyurethanes

A series of shape memory polyurethanes were synthesized from poly(tetramethylene glycol), 4,4‐methylene diphenyl diisocyanate, and 1,3‐butanediol. The prepolymers with different molecular weights (M_c) were capped with 2‐hydroxyl ethylacrylate or 3‐aminopropyltriethoxysilane (APTES) and crosslinked by UV curing or a sol–gel reaction. Variations of the crosslinker functionality (f), subchain density (N), and hard segment content (HSC) produced systematic variations of the glass transition temperature (6–45 °C), accompanied by changes in the mechanical, dynamic mechanical and shape memory properties. More than 95% of shape fixity and 98% of shape recovery up to the fourth cycles were obtained with APTES crosslinked 3000M_c with 30% of HSC. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1473–1479     

Radiation exposure to operator and patients during cardiac electrophysiology study,radiofrequency catheter ablation and cardiac device implantation procedures

The purpose of this study was to measure the radiation exposure to operator and patient during cardiac electrophysiology study, radiofrequency catheter ablation and cardiac device implantation procedures and to calculate the allowable number of cases per year. We carried out 9 electrophysiology studies, 40 radiofrequency catheter ablation and 11 cardiac device implantation procedures. To measure occupational radiation dose and dose–area product (DAP), 13 photoluminescence glass dosimeters were placed at eyes (inside and outside lead glass), thyroids (inside and outside thyroid collar), chest (inside and outside lead apron), wrists, genital of the operator (inside lead apron), and 6 of photoluminescence glass dosimeters were placed at eyes, thyroids, chest and genital of the patient. Exposure time and DAP values were 11.7?±?11.8?min and 23.2?±?26.2?Gy?cm² for electrophysiology study; 36.5?±?42.1?min and 822.4?±?125.5?Gy?cm² for radiofrequency catheter ablation; 16.2?±?9.3?min and 27.8?±?16.5?Gy?cm² for cardiac device implantation procedure, prospectively. 4591 electrophysiology studies can be conducted within the occupational exposure limit for the eyes (150?mSv), and 658-electrophysiology studies with radiofrequency catheter ablation can be carried out within the occupational exposure limit for the hands (500?mSv). 1654 cardiac device implantation procedure can be conducted within the occupational exposure limit for the eyes (150?mSv). The amounts of the operator and patient's radiation exposure were comparatively small. So, electrophysiology study, radio frequency catheter ablation and cardiac device implantation procedures are safe when performed with modern equipment and optimized protective radiation protect equipment.     

Sigmatropic Rearrangements in Phosphorylated 2-Azaallylic Systems

Abstract

Allylic and heteroallylic compounds are classical objects of organic chemistry and can serve as models in the investigation of various theoretical problems. The anions and 1,3-dipoles generated from azaallylic derivatives are widely used in the synthesis of cyclic and acyclic nitrogen-containing compounds.     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436