Pre-irradiation treatments for CR-39 detectors

The production of track-spots in CR-39 detectors for alpha particles and the subsequent optical counting of the detectors are often influenced by foreign substances deposited on the surface of the detectors. The removal of these substances can be achieved using chemicals for pre-irradiation treatment. Two methods of pre-irradiation treatment were studied in the present experiments. One of them involves the dipping of the detectors in ethanol. In the other method, the detectors were treated in 6N KOH etchant prior to exposure. It was found that prolonged treatment could only produce a reduction in the track density of less than 20%.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.     

Kinetic theory of granular shear flow: Constitutive relations for the hard-disk model

A kinetic theory for the constitutive Theological relations of rapid granular shear flow of hard circular disks, characterized by a coefficient of restitutione and a surface roughness coefficient, is formulated. From a set of general constitutive equations for single-particle dynamical variables, the approximate expressions for the limit of small and large dimensionless dissipative parameterR _t are obtained. HereR _t is defined as the ratio /, where is the fluctuation of translational velocity from the mean flow velocity, is the diameter of a disk, and is the shear rate. At smallR _t the theoretical predictions can be compared with exact computer simulation results of granular dynamics that are also reported. The agreement between theory and simulation is better than expected; the present theory is accurate up to high packing density in this region ofR _t .     

The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

A row–column addressed micromachined ultrasonic transducer array for surface scanning applications

Row–column addressed arrays for ultrasonic non-destructive testing (NDT) applications are analyzed and demonstrated in this paper. Simulation and experimental results of a row–column addressed 32 by 32 capacitive micromachined ultrasonic transducer (CMUT) array are presented. The CMUT array, which was designed for medical imaging applications, has a center frequency of 5.3 MHz. The CMUT array was used to perform C-scans on test objects with holes that have diameters of 1.0 mm and 0.5 mm. The array transducer has an aperture size of 4.8 mm by 4.8 mm, and it was used to scan an area of 4.0 mm by 4.0 mm. Compared to an N by N fully addressed 2-D array, a row–column addressed array of the same number of elements requires fewer (N instead of N²) pairs of interconnection and supporting electronic components such as pulsers and amplifiers. Even though the resulting field of view is limit by the aperture size, row–column addressed arrays and the row–column addressing scheme can be an alternative option of 2-D arrays for NDT applications.     

Polarization modulation instability in photonic crystal fibers

Polarization modulation instability (PMI) in birefringent photonic crystal fibers has been observed in the normal dispersion regime with a frequency shift of 64 THz between the generated frequencies and the pump frequency. The generated sidebands are orthogonally polarized to the pump. From the observed PMI frequency shift and the measured dispersion, we determined the phase birefringence to be 5.3 x 10(-5) at a pump wavelength of 647.1 nm. This birefringence was used to estimate the PMI gain as a function of pump wavelength. Four-wave mixing experiments in both the normal and the anomalous dispersion regimes generated PMI frequency shifts that show good agreement with the predicted values over a 70 THz range. These results could lead to amplifiers and oscillators based on PMI.     

Quantum State Sharing of an Arbitrary Three-Atom State by Using Five-Atom Cluster State in Cavity QED

We present a scheme for implementing the deterministic quantum state sharing of an arbitrary three-atom state by using a five-atom cluster state and a Bell-state in cavity QED. In the scheme, it does not involve Bell-state measurement and only needs to perform the single-atom measurements. Our scheme is not sensitive to both the cavity decay and the atom radiation, which is of importance in view of decoherence.