Unusually stable molecular capsule formation of a tetraphenyleneurea cavitand

An unusually stable molecular capsule was formed by heating phenyleneurea-spanned resorcinarene cavitand with 4-methyl-N-p-tolylbenzamide. The molecular capsule behaved as a discrete molecular entity showing a cylindrical D(4d) structure and showed no guest exchange in toluene-d(8) even at 100 degrees C. [structure: see text]     

Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.     

Enantiomer separation of a novel aminothiazolecarboxamide fungicide using polysaccharide-derived chiral stationary phases

The direct enantioseparation of a novel aminothiazolecarboxamide fungicide, ethaboxam, on polysaccharide-derived chiral stationary phases (CSPs) is described. Good resolution is achieved with several polysaccharide-derived CSPs. Chiralcel OD (OD-H) and Chiralpak AS are excellent for direct enantiomer separation of ethaboxam. The elution behavior and the effects of eluent composition on the resolution of ethaboxam are also investigated. Furthermore, the mechanism for chiral recognition using molecular mechanics is discussed.     

The Photochemistry of Diazomethane the Reactions of Methylene with Toluene and P-Xylene in Liquid Phase (I)

The photochemistry of diazomethane in toluene and p-xylene solutions was investigated. The reactions of methylene with toluene gave eight products. In the diazomethane p-xylene solution, p-ethyltoluene, 1,2,4-trimethylbenzene, 1,4-dimethylcyclohepatriene-1,3,5 and three unidentified compounds were found as products of the reaction of methylene with p-xylene. The relative rates of addition and insertion reaction of methylene with toluene and p-xylene have been calculated.     

Synthesis of some heterocyclic systems from nucleophilic substitution reactions with η6-o-dichlorobenzene-η5-cyclopentadienyliron hexafluorophosphate

A method for the synthesis of heterocylic systems related to 9,10-dihydroanthracene with two hetero-atoms at the 9,10-positions is described. It involves the nucleophilic substitution reaction of η⁶-o-dichlorobenzene-η⁵-cyclopentadienyliron hexafluorophosphate with two nucleophilic groups (OH, SH and/or NH₂) located in the 1,2-positions of a benzene ring to give a cyclopentadienyliron complexed heterocycle. Upon pyrolytic sublimation of the complex, the free heterocyclic compound is then obtained.     

A novel in-plane passive microfluidic mixer with modified Tesla structures

An innovative in-plane passive micromixer using modified Tesla structures, which are used as passive valves, has been designed, simulated, fabricated and successfully characterized in this paper. Simulation and experimental results of the developed novel micromixer have shown excellent mixing performance over a wide range of flow conditions in the micro scale. The micromixer realized in this work has achieved even better mixing performance at a higher flow rate, and its pressure drop is less than 10 KPa at the flow rate of 100 microl min(-1). This micromixer shows characteristics similar to Taylor dispersion, with contributions from both diffusion and convection. The mixer has a diffusion domain region at low flow rate, but it moves to a convection domain region at high flow rate. Due to the simple in-plane structure of the novel micromixer explored in this work, the mixer can be easily realized and integrated with on-chip microfluidic devices and micro total analysis systems (micro-TAS).     

Electrical conductivity measurements of aqueous sodium chloride solutions to 600°C and 300 MPa

Electrical conductance measurements of dilute (<0.1>^–1) aqueous NaCl solutions were made primarily to quantify the degree of ion association which increases with increasing temperature and decreasing solvent density. These measurements were carried out at temperatures from 100 to 600°C and pressures up to 300 MPa with a modified version of the apparatus used previously in the high temperature study in this laboratory. Particular emphasis was placed on conditions close to the critical temperaturelpressure region of water, i.e., at 5° intervals from 370 to 400°C. The results verify previous findings that the limiting equivalent conductance A_o of NaCl increases linearly with decreasing density from 0.75 to 0.3 g-cm^–1 and also with increasing temperature from 100 to 350°C. Above 350°C. A_o is virtually temperature independent. The logarithm of the molal association constant as calculated exclusively from the data400°C is represented as a function of temperature (Kelvin) and the logarithm of the density of water (g-cm^–3) as follows:

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

A mesoporous Pt/TiO2 nanoarchitecture with catalytic and photocatalytic functions

A novel metal/semiconductor nanocomposite with catalytic and photocatalytic functions has been prepared. The new material consists of highly dispersed platinum (Pt) nanoparticles embedded in a cubic mesoporous nanocrystalline anatase (meso-nc-TiO2) thin film. The porous thin film possesses a narrow pore-size distribution and a large surface area. The diameter of the Pt cluster can be controlled to below 5 nm, and the high dispersion of these clusters gives rise to catalytic activity for the oxidation of carbon monoxide, an important reaction for automobile exhaust treatment. This novel ordered mesoporous Pt/TiO2 nanoarchitecture is also a promising photochemical material, as demonstrated by the photo-driven killing of Micrococcus lylae cells on the film.     

Highly charging of nanoparticles through electrospray of nanoparticle suspension

Patterned deposition of nanoparticles is a prerequisite for the application of unique properties of nanoparticles in future nanodevices. Recent development of nanoxerography requires highly charged aerosol nanoparticles to avoid noise deposition due to random Brownian motion. However, it has been known that it is difficult to charge aerosol nanoparticles with more than two elementary charges. The goal of this work is to develop a simple technique for obtaining highly charged monodisperse aerosol nanoparticles by means of electrospray of colloidal suspension. Highly charged aerosol nanoparticles were produced by electrospraying (ES) and drying colloidal suspensions of monodisperse gold nanoparticles. Size and charge distributions of the resultant particles were measured. We demonstrate that this method successfully charges monodisperse nanoparticles very highly, e.g., 122 elementary charges for 25.0 nm, 23.5 for 10.5 nm, and 4.6 for 4.2 nm. The method described here constitutes a convenient, reliable, and continuous tool for preparing highly charged aerosol nanoparticles from suspensions of nanoparticles produced by either wet chemistry or gas-phase methods.