Electro-electrodialysis of HI–I2–H2O mixture using radiation-grafted polymer electrolyte membranes

In the thermochemical water-splitting iodine–sulfur process for hydrogen production, new polymer electrolyte membranes were applied in an electro-membrane process (electro-electrodialysis, EED) to increase the HI molality of HIx solution (HI + I₂ + H₂O mixture) to be over quasi-azeotropic. Radiation grafting of a styrene monomer into a poly(ethylene-co-tetrafluoroethylene) base film and subsequent sulfonation provided electrolyte membranes that had ion exchange capacities (IECs) of 1.1–1.6 mmol/g. With the EED of the HIx solutions using [HI] = [I₂] = 10 mol/kg at 40 °C the transport number of protons, ratio of permeated quantities of water to the protons, and current efficiency all appeared to depend on the IEC of the resulting membranes. When compared to Nafion, the self-made membranes exhibited lower electric cell resistance, and thereby decreasing up to 32% of the overall energy required in the concentration operation.     

Pulsed laser deposition of pure fluoroapatite film without OH groups

The relation between O₂ pressure and composition in the pulsed‐laser deposition of fluoroapatite was investigated using both on‐axis and off‐axis methods to determine the optimal conditions for obtaining a pure fluoroapatite film without OH groups. Through this, it was found that an O₂ pressure of 10 Pa, combined with an off‐axis method, results in P/Ca and F/Ca values (0.6 and 0.2, respectively) that match closely with a stoichiometric composition of Ca₁₀(PO₄)₆F₂. Fourier transform infrared spectroscopy analysis confirmed that this optimized film was almost pure fluoroapatite, with no evidence of any OH groups originating from hydroxyapatite. X‐ray diffraction also revealed that this fluoroapatite film crystallizes with a c‐axis orientation perpendicular to its surface.     

Unprecedented alkylation of silicon enolates with alcohols via carbenium ion formations catalyzed by tin hydroxide-embedded montmorillonite

The solid acid, tin hydroxide-embedded montmorillonite, catalyzes the unprecedented alkylation of various silicon enolates with primary, secondary and tertiary benzylic alcohols as well as secondary allylic alcohols. The acid catalysis of Sn-Mont was not only higher than that of the other ion-exchanged montmorillonites (M-Mont; M = H, Ti, Fe and Al), but also higher than that of the typical homogeneous acid catalysts such as BF₃·OEt₂, TMSOTf and TfOH.     

Enhanced photon generation in a Nb/n-InGaAs/p-InP superconductor/semiconductor-diode light emitting device

We experimentally demonstrate Cooper pairs' drastic enhancement of the band-to-band radiative recombination rate in a semiconductor. Electron Cooper pairs injected from a superconducting electrode into an active layer by the proximity effect recombine with holes injected from a p-type electrode. The recombination of a Cooper pair with p-type carriers dramatically increases the photon generation probability of a light-emitting diode in the optical-fiber communication band. The measured radiative decay time rapidly decreases with decreasing temperature below the superconducting transition temperature of the niobium electrodes. Our results indicate the possibility to open up new interdisciplinary fields between superconductivity and optoelectronics.     

Flow injection determination of iodide ion in a photographic developing solution using iodide ion-selective electrode detector

A potentiometric flow injection determination method for iodide ion in a photographic developing solution was proposed by utilizing a flow-through type iodide ion-selective electrode detector. The sensing membrane of the electrode was Ag₂S–AgI membrane. The response of the electrode detector as a peak-shape signal was obtained for injected iodide ion in a photographic developing solution. A linear relationship in the subnernstian zone was found to exist between peak height and the concentration of the iodide ion in a photographic developing solution in a concentration range from 0 to 6.0×10⁻⁵ mol l⁻¹. The relative standard deviation for ten injections of 2×10⁻⁵ mol l⁻¹ iodide ion in a photographic developing solution was 0.96% and the sampling rate was approximately 12–13 samples h⁻¹. The iodide ion could be determined under coexisting of an organic reducing reagent and inorganic electrolytes of high concentration in a photographic developing solution sample solution by the present method.     

Enantiomeric separation of dansylamino acids by capillary zone electrophoresis based on complexation with cyclodextrins

Summary The enantiomeric separation ability of unmodified and methylated cyclodextrins (CDs) during capillary zone electrophoresis (CZE) was investigated using twelve dansylamino acids. Unmodified - and -CDs exhibited high enantioselectivities. -CD could scarcely separate the enantiomers before and after dimethylation, but obtained enantioselectivity after trimethylation. On the other hand, dimethylation of -CD removed much of its high enantioselectivity. Moreover, the chemical modifications produced a reverse in the migration order of the enantiomers. The inclusion of dansyl-DL-phenylalanine with CDs was evaluated using 600 MHz ¹H NMR spectroscopy.     

Modified Vonk's Method to Determine Crystallinity and Crystal Distortion in Polymers

Using a modified method developed from Vonk's method, detailed values of crystallinity and crystal disorder were obtained by wide angle X-ray diffraction (WAXD). In Vonk's method, the crystallinity (w) is determined by extrapolation of the WAXD experimental curve back to zero scattering angle, while the distortion factor (k) is determined by the inclination of the experimental curve at zero scattering angle. In our new method, both w and k are determined at the same time by using the least squares method. In order to show the efficiency of our method, the new fitting procedure was applied to the experimental values of polyethylene and polyethylene terephthalate as measured by Vonk, and the values of w and k determined by our new method were compared with those found by Vonk's method. The new fitting method has the advantage that it uses the whole experimental curve. Moreover, our modified Vonk's method enables us to discuss crystal distortions as arising from first-kind (thermal) disorder and second-kind (paracrystalline) disorder.     

Analysis of ordered categorical data from repeated measurements assuming a quantitative latent variable

Summary The purpose of the present paper is to propose an analytical method for ordered categorical responses obtained from a repeated measurement/longitudinal experiment. The ordered categorical scale is assumed to be a manifestation of a latent quantitative variable. A linear model is assumed for location parameters of the underlying distributions. Weighted least square method is applied to parameter estimation and subsequent analysis. Two data sets are analyzed to show several aspects of analysis by the proposed model and to discuss comparative characteristics of analysis compared with earlier analysis. A mention is made for a computer software program for the proposed model.     

Measurement of B(0)(d)-B_(0)(d) mixing rate from the time evolution of dilepton events at the upsilon(4S)

We report a determination of the B(0)(d)-&B_(0)(d) mixing parameter Deltam(d) based on the time evolution of dilepton yields in Upsilon(4S) decays. The measurement is based on a 5.9 fb(-1) data sample collected by the Belle detector at KEKB. The proper-time difference distributions for same-sign and opposite-sign dilepton events are simultaneously fitted to an expression containing Deltam(d) as a free parameter. Using both muons and electrons, we obtain Deltam(d) = 0.463+/-0.008 (stat)+/-0.016 (syst) ps(-1). This is the first determination of Deltam(d) from time evolution measurements at the Upsilon(4S). We also place limits on possible CPT violations.