Solvent-Free Microwave-Assisted Organic Reactions Preparation of β-Keto Esters

Microwave technique has been utilised in the preparation of β-keto esters. Two different procedures are described: transesterification of β-keto esters and ring opening of 2,2,6-trimethyl-1,3-dioxin-4-one.     

Morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals

We have investigated the morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals as a function of liquid crystal loading. Reverse mode shutters have been obtained by a polymerization-induced phase separation of mixtures, consisting of a liquid crystalline monomer and a non-reactive nematic liquid crystal, placed between rough conductive surfaces. Such surfaces are able to keep the photopolymerizable mixtures homeotropically aligned without the use of any aligning polymer substrate. OFF state transmittances are always larger than 80% and the switching fields decrease if the non-reactive liquid crystal percentage is increased. Both rise and decay times are always lower than 10 ms. The electro-optical properties have been related to the sample morphology and a simple mode is proposed.     

Photochromic reverse mode polymer dispersed liquid crystals

Control of light intensity and colour are two of the major features required in the realization of smart windows. We designed a bi‐functional polymer dispersed liquid crystal (PDLC) film in order to satisfy such requirements, i.e. it is able both to modulate the optical transmission, if an external electric field is applied, and to change colour if exposed to sunlight. A monomer/liquid crystal mixture was doped with a small amount of photochromic material and homeotropically aligned by means of rough surfaces. A transparent and pale pink coloured film was achieved after photopolymerization. Such a film changes colour upon exposure for some seconds to sunlight or ultraviolet radiation in a persistent but reversible manner. In addition, the film appears transparent without the application of an electric field (OFF state) and becomes opaque on application of a driving voltage of about 75?V (ON state), and thus the film operates in reverse mode with respect to conventional PDLCs.     

Liquid crystal orientation in elliptic droplets in nematic emulsions

Elliptic droplets of nematic liquid crystal dispersed in a fluid organic monomer were obtained by phase separation from an isotropic mixture consisting of an organic monomer and a nematic liquid crystal contained in a poly(ethylene terephthalate) cell with inner surfaces treated with rubbed polyimide. The elliptic shape is a consequence of the constraint upon droplet growth along the direction perpendicular to the cell surfaces owing to the small thickness. Then, the resulting droplets will have a contact area with the inner surfaces of the cell treated with polyimide, which will impart a planar orientation on the liquid crystal in the droplet. By means of an optical microscope, using a simple pin hole of 5 μ m, we have selected single droplets for a series of samples having different contact areas. By polarized infrared spectroscopy we have also studied the liquid crystal orientation in selected areas of the droplets. We then report the dependence of the order parameter of the liquid crystal on different contact areas with the alignment surface of the cell. The good degree of planar alignment of the liquid crystal in the elliptic droplets allows the use of such a technique for realizing electro-optical films operating in the reverse mode. We report the electro-optical transmission of reverse mode films with different sizes of elliptic droplet.     

An Automatic Molecular Dispenser of Chloride

The combined activity of the 1.1.1‐cryptand and of a dicopper(II) bistren cryptate complex including chloride makes the Cl^? ion be continuously and slowly delivered to the solution, without any external intervention. The 1.1.1‐cryptand slowly releases OH^? ions, according to a defined kinetics, and each OH^? ion displaces a Cl^? ion from the cryptate. Chloride displacement induces a sharp colour change from bright yellow to aquamarine and can be conveniently monitored spectrophotometrically, even in diluted solutions. The 1.1.1‐cryptand is the motor of a molecular dispenser (the dicopper(II) cryptate) delivering chloride ion automatically, from the inside of the solution.     

Polymerization of Ethylene by Silica‐Supported Dinuclear CrIII Sites through an Initiation Step Involving C?H Bond Activation

The insertion of an olefin into a preformed metal–carbon bond is a common mechanism for transition‐metal‐catalyzed olefin polymerization. However, in one important industrial catalyst, the Phillips catalyst, a metal–carbon bond is not present in the precatalyst. The Phillips catalyst, CrO₃ dispersed on silica, polymerizes ethylene without an activator. Despite 60 years of intensive research, the active sites and the way the first Cr C bond is formed remain unknown. We synthesized well‐defined dinuclear Cr^II and Cr^III sites on silica. Whereas the Cr^II material was a poor polymerization catalyst, the Cr^III material was active. Poisoning studies showed that about 65 % of the Cr^III sites were active, a far higher proportion than typically observed for the Phillips catalyst. Examination of the spent catalyst and isotope labeling experiments showed the formation of a Si–(μ‐OH)–Cr^III species, consistent with an initiation mechanism involving the heterolytic activation of ethylene at Cr^III O bonds.     

Effects of Salts on the Micellization of a Short-Tailed Nonionic Ethoxylated Surfactant: An Intradiffusion Study

In commercial formulations, surfactants are often co-formulated with inorganic electrolytes, which are included as inexpensive thickeners. Salts affect the surfactant’s aggregative and functional behavior. However, while the electrolyte effect on the self-aggregation of ionic surfactants can be rationalized in terms of electrostatic interactions, in the case of nonionic surfactants the molecular determinants are still unclear. In this work, we investigate the effects of alkali and alkaline–earth metal chlorides on the micellization of the nonionic surfactant hexyl penta(oxyethylene) ether, C₆E₅, in aqueous solution. To this aim, the C₆E₅ intradiffusion (also named self-diffusion) coefficient in aqueous mixtures of various alkali and alkaline–earth metal chlorides was measured by pulsed gradient spin-echo NMR. The results show that all the considered electrolytes cause a decrease of the surfactant critical micellar concentration, cmc, while the micellar size is almost unaffected. The experimental evidence can be interpreted in terms of de-hydration of the apolar alkyl tails with a minor contribution arising from the dehydration of the poly(ethylene oxide) headgroups. The order of effectiveness of the different cations follows the Hofmeister series, some aspects of which are briefly discussed.     

Synthesis of 3-iodothiophenes via iodocyclization of (Z)-thiobutenynes

A simple synthesis of 3-iodothiophenes was demonstrated using a wide range of (Z)-thioenynes. The key step in the iodocyclofunctionalization was the selective reduction of the triple bond in (Z)-thioenynes by the addition of iodine as an electrophilic agent. The 3-iodothiophenes were obtained in good to excellent yields of 61–92%. The 3-iodothiophenes were used as substrates in Sonogashira cross-coupling reactions to obtain thiophene acetylenes.     

A simple and convenient method for synthesis of new aminonaphthoquinones derived from lawsone by catalytic multicomponent Mannich reaction

A clean, efficient and facile one-pot protocol was developed for the synthesis of a series of new aminonaphthoquinones derived from 2-hydroxy-1,4-naphthoquinone (lawsone) by three-component Mannich reaction using catalytic amount of p-TsOH in CH₃CN, at room temperature. At the present work, we improved the yield and significantly reduced the reaction time for several Mannich reactions with different amine and aromatic aldehydes using a non-expensive, mild catalyst and suitable solvent.     

Solid-phase microextraction/gas chromatography–mass spectrometry method optimization for characterization of surface adsorption forces of nanoparticles

A complete characterization of the different physico-chemical properties of nanoparticles (NPs) is necessary for the evaluation of their impact on health and environment. Among these properties, the surface characterization of the nanomaterial is the least developed and in many cases limited to the measurement of surface composition and zetapotential. The biological surface adsorption index approach (BSAI) for characterization of surface adsorption properties of NPs has recently been introduced (Xia et al. Nat Nanotechnol 5:671–675, 2010; Xia et al. ACS Nano 5(11):9074–9081, 2011). The BSAI approach offers in principle the possibility to characterize the different interaction forces exerted between a NP's surface and an organic—and by extension biological—entity. The present work further develops the BSAI approach and optimizes a solid-phase microextraction gas chromatography–mass spectrometry (SPME/GC-MS) method which, as an outcome, gives a better-defined quantification of the adsorption properties on NPs. We investigated the various aspects of the SPME/GC-MS method, including kinetics of adsorption of probe compounds on SPME fiber, kinetic of adsorption of probe compounds on NP's surface, and optimization of NP's concentration. The optimized conditions were then tested on 33 probe compounds and on Au NPs (15 nm) and SiO₂ NPs (50 nm). The procedure allowed the identification of three compounds adsorbed by silica NPs and nine compounds by Au NPs, with equilibrium times which varied between 30 min and 12 h. Adsorption coefficients of 4.66?±?0.23 and 4.44?±?0.26 were calculated for 1-methylnaphtalene and biphenyl, compared to literature values of 4.89 and 5.18, respectively. The results demonstrated that the detailed optimization of the SPME/GC-MS method under various conditions is a critical factor and a prerequisite to the application of the BSAI approach as a tool to characterize surface adsorption properties of NPs and therefore to draw any further conclusions on their potential impact on health. Graphical Abstract

The basic principle of SPME/GC-MS method for characterization of nanoparticles surface adsorption forces